SPL REPAIRS TO BLDG NO. P-27 AND PROVN OF CERTAIN MAJOR REVENUE AND MINOR WORKS

Amount

SCHEDULE A BOQ

Dismantling ceiling boards any description, any thickness including cover fillets all as directed.

M & L for False ceiling with 12.5mm thick Gypboard plain board (Make Saint Gobain Gyproc India) including all necessary fittings and fixtures , which includes gypsteel ULTRAtm CRP surface ribbed perimeter channels (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm) along the perimeter of ceiling screw fixed to brick wall/ partition with the help of nylon steeves and screws, at 610mm centres. Then suspending Gypteel ULTRA tm CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with Gypsteel ULTRA tm CRP surface ribbed ceiling angle of width 25mm x 10mm fixed to soffit with GI cleat and steel expansion fasteners (Mfg by Saint Gobin Gyproc). Then Gypsteel ULTRA tm CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the Gypsteel ULTRA tm intermediate channel with the help of connecting clip and in direction perpendicular to the Gypsteel intermediate tm channel at 457mm centres. Single layer of 12.5mm tapered edge Gypboard Plain (confirming to IS 2095 part 1 1996) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape. (As per recommended practices of Saint- Gobain Gyproc India) incl Painting of Gypboard Ceiling/Partition/Walls with two coat of (Birla wallcare putty) two coats of primer and two coats of EMULSION (Asian) with roller finish complete all as specified and directed. Make : M/S Armstrong/M/S Everest regular/ M/S Ramco

Supply and fix mineral fibre acoustical suspended ceiling system with 600x600x16mm classic lite (Bevelled Tegular) edge tiles with Armstrong 15mm exposed grid. The tile laid on Armstrong superfine 38 with 15mm wide 'T' section flanges colour white having rotary stiching on all section ie. the main runner 1200mm & 600mm cross tees with a web height of 38mm and load carrying of 12.5Kg/sqm and pull out strength of 100 Kgs. The T section have a Galvanising of 90 gm/sqm and need to be installed with suspension system of Armstrong make. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm module. Cut cross tee longer than 600mm require independent support. 600x600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Permeter trim shall be Armstrong wall angles of size 3000x24x24mm, secured to walls at 450mm maximum centres. Anchor fasteners with verticle Hangers made out of galvanised steel of size 26x26x1.2mm with a galvanised thickness of 80 gms, pre-straightened hanger wire of dia 2.5mm and length of 1.8m, thickness of 80gms, and a tensile strength of 344-413 MPG alongwith adjestable hook clips or 0.8mm thich galvanised spring steel for 2.68mm with a minimum pull strength of 110 kg. The adjestable clip also consists of a 3.5mm Quiline wire to be used with main runner complete all as specified and directed. Make : M/S Armstrong/M/S Everest regular/ M/S Ramco

M & L for fixing in repairs False ceiling with 12.5mm thick Gypboard plain board/design matching with existing ceiling board (Make Saint Gobain Gyproc India) including all necessary fittings and fixtures complete all as spd and as directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut tolength, bent to shape required, including cranking, bending and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and as directed.

M & L for Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 complete all as spd and as directed.

S&F of Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as spd and as directed.

Demolition of brick work built In cement mortar,including all quoin,arches.pillars etc but excluding ashlar facing, precast concrete articles complete all as spd and as directed.

M & L for Brick work with fly ash brick subclass 'B' straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as directed.

Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.

Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and directed.

Taking down Chowkats or frames with shutters exceeding 1.5 Sq.m each but n exc 4 sq.m each complete all as specified and directed.

M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Flush shutters,30mm thick, solid core construction, with particle board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

Material and labour for 2 nd class HW 35 mm thick Glazed and skeleton shutter open rebated and prepared to receive glass , gauge, etc with sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F 10mm thick tempered toughened glass glazing securing with oil putty /brads in square exc 0.5 sqm in each panes complete all as specified and directed.

S &F of solar control film 25micron reflective type sticked to glass panes as per instruction of manufacurs complete all as specified and directed.

M & L for Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F 150 mm size Brass Butt hinges medium weight complete all as specified and directed.

S & F 150 mm size Brass barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed all as specified and as directed .

S&F 150 mm size brass handles fancy type ,,polished bright all as specified and as directed .

S&F of Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) length of bolt 250mm and fixing bolt with rolled or drawn brass bolts and fixed all as specified and as directed .

S & F Floor door stopper 150mm long with cover plate of brass body and tongue with hard drawn steel spring all as specified and as directed .

M&L for French polishing on wooden surfaces of any description, width or girth including cleaning ,and preparing the surface including a coat of wood filler on new works with two or more coats all as directed

M &L for Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

M &L for Preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed

S&F brass Mortice lock vertical type100 mm size 4 levers including escutcheon plates and two keys complete all as specified and directed.

S&F Aluminium ( Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in Repairs all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick all as specified and as directed.

M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer over 3mm thick wall care putty on wall all as specified and as directed .

M&L Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for dark shade/Double charged/ultra charged vetrified ceramic tiles 10mm thick (Square/rectangular) Polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 33 above but as in skirting/Dado complete all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M & L Glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M&L Granite (of any type) tiles 20mm thick machine cut, bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Screed bed or bedding layer of mortor 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (40mm graded agg) 100 mm thick as in floor, sub-base, etc. and finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick,dark shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165 complete all as specified and directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of ppropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing, rame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all complete as per approved drawing & direction of Engineer-in-Charge.

Demolition of concrete in above ground floors and pavings n. exc 15 cm thick complete all as specified and directed.

M&L 100mm thick, plain cement concrete (1:2:4), type B-1 (using 20 mm graded mechanically crushed stone aggregates), as in hardstanding , surface finished even and smooth without using extra cement, spike rolling to surface or making of expendable metalwhilt the concrete is green complete all as specified and as directed.

M&L 25 mm thick cement concrete type B-0,1:2:4 (12. 5mm graded aggregate) as in sub base of floors all as specified.

M & L for preparing new steel and iron surfaces any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparing old steel and iron surfaces any description n exc 10 cm in width or girth , and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations

M&L for Rendering in CM 1:4, 10 mm thick on fair faces of stone wall work or concrete surfaces .in cement mortar 1:4 ,finished even and smooth with out using extra cement, including taking down exising plastering of any description complete all as specified and as directed.

M&L for Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement including taking down exising plastering of any description complete all as specified and directed. Note: Water proofing compound shall be measured and paid seperately.

supply only integral water proofing compound complete all as specified and directed.

M&L complete removal of existing treatment of old plastered wall surface applying two coats of distemper oil emulsion over a coat of primer ( Chalk whitening ) with3 mm thick wall care putty all as specified and directed.

S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

S&F 5mm figured glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.

Removing building material out side the campus including loading capacity of each load exc 6.0 cum but n exc 8.0 cum and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land ( Ministry of Defence) where responsibility regarding place of deposition and permission from all authorities etc., in this regard will be of contractor and all as specified. Note : Location and Permission of deposting the disposal out side the MD land shall be rest with contractor at his own arrangement complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L 30mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete provided with stiles and rails as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

M&L for applying 1mm thick high build fibre reinforced acrylic elastomeric water proofing render with Brush bond roof guard of Fosroc or equivalent (in three coats to achieve total 1mm thickness) over a coat of primer with Nitoproof WB of Fosroc or equivalent , complete all as per manufacturers instructions and as directed by Engr-in- charge. all as recommended by manufacturer and complete all as specified and directed. Note:-(i) Average minimum DFTof PU based material shall be 1mm and shall be applied by using a Graco pump. (ii) PU based material shall process the following properties solids by volume -65%, tensile strength ASTM D412-1.75Mpa, density 1.3 g/ml, elongation ASTM D-412-350%, Adhesion to substrate concrete-1.9Mpa, resistance to water-10m pressure. (iii) Rate are deemed to be include for cleaning and preparation of surface to receive PU water proofing system including filling of cracks with cementitious repair mortars i.e renderoc CS of Fosrock chemicals (or) equivalent of approved make. (iii) Work shall be got carried out by authorised applicator of the manufacturer and it shall be got approved by the GE before progressing the work. (iv) 10 years of guarantee shall be provided and security amount shall be deposited as speicified in tender documents.

Rakingout joints/flush pointing Cement mortar in brick tiles 30cm by 20cm laid flat as in floors, roofs, and M & L for flush pointong jointed pointed in CM 1:3 mixed with water proofing compound and mixed with 5% crude oil by weight of cement complete all as specified and directed.

Supply only approved water proofing liquid complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc.complete all as specified and directed.

M& L for Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 25mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed by Engineer-in-Charge.

S&F brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe complete all as specified and directed. Make : Jaquar . Model No :ALD-565 or equivalent including taking down .

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge.

S&F WHB with pedestal and click clack type coupling . Make : Jaquar Model No : CNS-WHT-801 (for WHB), CNS-WHT-305 (for pedestal) & ALD-727(For coupling) , or equivalent all as per specified.

Waste coupling of 32mm PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repairs chromium plated stop valves, cast copper chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F angular stop cock with wall flage screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. Make : Jaquar . Model No :OPP 15053PM or equivalent including taking down of existing one complete all as per specified .

S&F two way Bib taps, brass chromium plated fancy type with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. Make : Jaquar . Model No :OPP 15041PM or equivalent all as per specified.

S&F Pillar cock , brass chromium plated, fancy type ,screwed for iron pipe or for brass ferrule and fixed for 15mm bore. Make : Jaquar . Model No :QQT-7011 or equivalent all as per specified .

S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore complete all as specified and directed.

Taking up or down 15mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 20mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down 20 mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 25mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified.

S&F in repair for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,all as specified and directed.

S & F in repair PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F in repair PVC (SWR) pipe 75 mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bends 75mm radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 50mm dia Unplasticised PVC pipe of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S &F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge.

S&F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel with brass/bronze hinge pin complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of ex?truded section and fixedcomplete all as specified and directed.

S & F Floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type anodised as specified and directed

M & L for 18/19mm thick prelaminated particle board , exterior gragrade , prelaminated both side with decorative choice laminarion and and fixefd with screw to frame etc complete all as specified and as diirected.

S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin ) with decovative face veneers one face, fixed to frame of aluminium sliding frame complete all as specifed and directed.

Taking down and refixing in same opening of shutters of any description exc 1 sqm and n exc 2sqm each all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified and as directed by Engineer- in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F 35mm thick IInd class hard wood ,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F urinal spreader CP 15mm size fixing for Urinal, Half stall type, complete all as specified and directed.

Chipping/removing loose concrete up to reinforcement bars, without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc. complete all specified and directed. Note : The work up to three storey building.

Providing and applying priming cum bonding coat of polymer of approved make and quality as approved by Engr-in-charge and cement slurry in 1:1 proportionate by weight to concrete area by brush or any other established method etc. Note : The work up to three storey building complete. Make :- SIKA- SIKA Latex or SRB or FOSROCK - Nitobond EP

Providing Micro Concrete jacketing to walls/columns or beams of thickness upto 75mm using polymer modified cement premixed quartz sand aggregate packed in bags of standard manufacture , for high early strength of 40 N/mm sq cm of approved brand. The dry product is to mixed with 12.50% water by weight, along with washed and poured into rigid form work moulds & tamped properly, & cured for 3 days (Payment is to be made by weight premixed of micro concrete product consumed as per site register records. No extra payment shall be made for shuttering or any other material, like scaffoling etc. complete all specified and directed. Note : The work up to three storey building. Make :- SIKA-SIKA Rep microconcrete-4 /FOSROCK : Rendero CRG

Providing and applying polymer modified cement mortor of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacture's specification in speific layers, curing after 72 hours of application with wet gunny bags etc and by finishing the surface with 12 mm thick (1:3) Cement sand plaster. Note : The work up to two storey building. Make : SIKA- Sika 162 HS /FOSROCK- Renderoc HS xtra

Dismantling wrought iron or mild steel work of air duct,Central Air conditioning pipe fixed in wall/ceiling including fixing arrangements like bracket etc any description not otherwise provided all as directed ..

Taking down carefully any type of steel rolling shutters,any description any position manual operated /gear box type of size exc. 5 Sqm but n. exc. 15 Sqm each , and making good the distruped portion matching with existing surface complete all as specified and directed

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Excavation in trenches n exc 1.5 m width and n exc 1.5 m depth and getting out in soft/loose soil complete all specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation complete all specified and directed.

M&L Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete complete all specified and directed.

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 including finished even and smooth complete all specified and directed.

M&L Preparing new surfaces of plastered or unplastered wall and applying two of oil bound distemper over providing over putty of 2 mm thickness over plastered surface to prepare the surface even and smooth with Priming plastered andother surfaces with alkaliresistant priming paint complete all specified and directed.

M & L rendering 15 mm thick in CM 1:4 on external surfaces of brick wall with finished even and smooth complete all specified and directed.

M&L Preparing new surfaces of plastered or unplastered wall and applying two coats of cement based paint over alkali resistant paint complete all specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirallyhooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L Reinforcement cement concrete (nominal mix Type B1 1:2:4 (20mm grded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels,cantilevers, shelves including supports, overhangs, etc. also splys between floors and beams, etc complete all specified and directed.

M&L Reinforcement cement concrete (nominal mix Type B1 1:2:4 (20mm grded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all specified and directed.

M&L for spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all specified and directed.

M&L for hardcore of gauge n exc. 63 mm, using broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, wa-tered and rammed to a true surface complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick, LIGHT shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L 75mm thick, plain cement concrete (1:3:6), type C-2 (using 40 mm graded stone aggregates), as in Plinth protection/ Path including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed. Note :- The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

S & F MS tubular frames including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Gde St-240 and painted one shop coat of zinc primer including preparation of surfaces complete all as specified and directed.

S&F Rolled sections as in main andcross beams, hip and jack rafters; purlins where connected tocommon rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all specified and directed.

M&L False ceiling using GI snap grid(Everest regular T-2430 System or equivalent) size 610 x 610mm with main runner 38mm x 24.38mm, cross tee 29 x 240.30mm and wall angle 24 x 240.38mm suspended with 4mm dia GI wire fixed with steel dash fasteners carry maximum load upto 8.1Kg/Sqm with 4mm thick designer ceiling board (Lake and Hill of Everest or euivalent) complete all specified and directed.

Factory made UPVC three track sliding Window frame having 2 tracks for glass shutter and 1 track for mosquito sash made of upvc profile section of size 73mm x 42mm (wxh) having outer wall thickness of 2.0mm(+/-0.2mm). Sliding glass shutter shall be made of UPVC section of size 55mm x 33mm and sliding wire mesh shutter shall be made of UPVC section of size 40mm x 22mm. All section of the frame, sash, transom & mullion, as applicable, shall be duly reinforced with G/J/U/O shape galvanised mild steel section of required thickness considering structural / wind load requirement. System shall be provided with the suitable upvc bead for glazing of the system & fitted with inner & outer EPDM seal gaskets. Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. All welded joints are to be neatly trimmed & feature grooved/raised nib finish so make the finished product free from all sharp edges & burrs. All the corner / mullion / transom joints of the frame and sash shall be mitered cut & fusion welded without any mechanical joining. System shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. System is to be provided with proper operating & locking hardware mechanism. Window locking system will be either both side push lock system or semi-circle locking system in centre. Complete window shall be fixed in to the existing pre finished aperture, by drilling and fixing through the outer frame using quality fasteners & silicon glue is applied to fill up the crevice between wall and window frame for leak proof installation including taking existing one complete all as specified. Note: - The contractor will have to submit 5 years warranty certificate for upvc profile and 1 year warranty certificate for hardwares.

S&F Butt Hinges 100mm long, medium weight , cold rolled mild steel, and fixed complete all specified and directed.

M&L for 15mm thick damp proof course in cement morar 1:2 incl water proofing compound to horizontal or vertical surfaces all as specified and as directed.

S&F of 3 layer PP-R polypropelyne random co popymer pipes 20 mm bore SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water including all PPR plain & brass threaded fittings fixed concealed to walls,ceilings or in floors etc. complete all specified and directed.

S&F of 3 layer PP-R polypropelyne random co popymer pipes 25 mm bore SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water including all PPR plain & brass threaded fittings fixed concealed to walls,ceilings or in floors etc. complete all specified and directed.

S&F of 25 mm outer dia PP-R Gate Valves (Brass insert) with iron wheel head screwed both ends for iron pipes and including taking out unserviceable Gate valves complete all as specified and directed.

Supply and fixing factory made pristine white colour Luxury casement window (uPVC) Double Glazing Unit (DGU) with Accoustics Laminated Glass (6 HS + 1.52 ACSTC + 5 HS) 12.52mm + 10mm Inert gas (Argon gas) + 5mm HS with internal opening option. The fixtures shall be designed with air tight sealing and fusion welded joints, complete all as specified and directed by Engineer-in-Charge.

Cutting existing any pipe of 40 or 50 mm for alterations or additions including screwing for inserting tee , reducer etc for taking brach connection including new fittings and fixtures complete all as specified and as directed.

Supply and fix of 50 mm outer diameter of pipes 3 Layer PP-R Polyproplyne random copolymer concealed SDR 7.4 (PN 16 @ 20°C) UV stabilized and antimicrobial fusion welded havIng thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropyelene random fittings complete all specified and directed.

Supply and lay in replacement of UPVC pipe class “SCH 40”, 75 mm mimum inner dia, conforming to IS 13592 with all fittings (specials) and fixtures including disconnecting and taking out old unserviceable pipe with fittings complete all as specified and directed. .

All as per Item No. 153 above herein before but UPVC pipe class “SCH 40”, size of 25 mm outer dia complete all specified and directed.

All as per Item No. 153 above herein before but UPVC pipe class “SCH 40”, size of 20 mm outer dia complete all specified and directed.

S&F of 50 mm outer dia PP-R Gate Valves (Brass insert) with iron wheel head screwed both ends for iron pipes and including taking out unserviceable Gate valves complete all as specified and directed.

Supply and fixing of UPVC ball valve/gate valve for fixing with proper joints and fittings size 25/20 mm all as specified and directed by Engr -in-Charge.

M&L for Sand cushioning of cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all specified and directed.

Supply and laying well burnt sub class ‘B’ bricks old size as mechanical protection to under ground cables laying across the cable as specified and directed.

Supply and fix 25 mm outer diameter of pipes 3 Layer PP-R Polyproplyne random copolymer concealed SDR 7.4 (PN 16 @ 20°C) UV stabilized and antimicrobial fusion welded havIng thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropyelene random fittings complete complete all specified and directed.

All as per Item No. 160 herein before but 3-layer PP-R pipe size of 20 mm outer dia complete all specified and directed.

S&F of 20 mm outer dia PP-R Gate Valves (Brass insert) with iron wheel head screwed both ends for iron pipes and including taking out unserviceable Gate valves complete all as specified and directed.

S&F of PVC water storage tank 3 layer 1000 ltrs capacity Rotational moulded ployethlene water starage tank as per IS hoisting and fisinf in position, connection up pipes etc tank with locking arrangement as per SSR Part I complete including taking down of existing one all as specified and directed

M&L in provn of Ladder/staging for OHT with MS square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge.

Supply,test,install & commsissioning of outdoor type, double door 3.15 mm thickness canopy hood type Bus bar chambers(including 4 bus bars i.e R,Y,B and neutral),3-Ph with neutral,1100volts,50Hz, 4-Way, 200 Amp including suitable sheet metal enclosure along with necessary screws,nuts,bolts and other Misc accessroies and making connections(input &out put) with cable terminal ends complete for the following current carrying capacities, Panel mounted on suitable size & thickness of angle iron frame (proper mounting shall be done) duly painted and embeded in necessary required quantity of PCC 1:3:6 type C1, 30 cm below ground level and 15 cm above ground level all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level, top edge of the plate not less then 1.5M below nominal ground level connected to 4mm dia GI earth wire by means of bolts and cheek nut and washer of galvanised iron incl GI protection pipe and watering pipe all as shown in electrical plate No 3 of SSR Pt 1 including connection with panel board / lightening arraestor all as specified or indicated incl testing on completion all as directed.

S&F of GI tubing light grade of size 25mm for protection of GI wire in trenches/on pole/wall all as directed by Engr-in-charge.

S & F XLPE insulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional of the following sizes laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, etc complete all as specified and directed.

(a) 35 Sqmm 3.5 core

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220V AC recessed type wity high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Modular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for

(a) One light point/fan/bell point controlled by one switch

S&F wiring complete with 2.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Mpodular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 2.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for

(a) One 3 pin socket out 5 amp on the same board

(b). one switch socket outlet 3 pin 5 Amps on independent board

(c) one switch socket outlet 3 pin 15 Amps on independent board

S&F of wiring complete with 4 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Mpodular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 4 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for

(a) one AC point on independent board

S&F modular switch 1 way 6 Amps, 1 module.

S&F modular switch 1 way 16 Amps, 1 module.

S&F modular socket outlet multipurpose 2/3 pin 6 amps, 2 module.

S&F modular socket outlet multipurpose 2/3 pin 6/16 amps, 2 module.

S&F white cover plate with frame, 3 Module.

S&F white cover plate with frame, 6 Module.

S&F metal flush box 3 module.

S&F metal flush box 6 module.

S&F electronic modular fan regulator 230 volts, step type socket type, hum free 120 watt 2 Module.

S&F ceiling rose, surface type Bakelite 65x55mm 3 terminal

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fixing factory made powder coated distribution board SPN 8 way, double door including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and directed

S&F MCB SPN 32 Amp , 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified

Supply and fixing single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 all as specified

S&F Sub main wiring for circuit complete with 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia metallic Steel conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

Supply and fixing 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from notless than 110 lumens/watt.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection 2KV ,ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz ,The system efficacy must be between80-100 lumen /watt ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make :- Philips, Wipro, Jaguar or equivalent

M/s.Sai Agency (BID ID -3314168)

A.GOVINDARAJ (BID ID -3314432)

CAK Enterprises (BID ID -3313830)

NAVEEN ENTERPRISES (BID ID -3313476)

Neptune Engineers and Builders (BID ID -3313180)

LAKSHMI ELECTRICAL ENTERPRISES (BID ID -3313225)

G Perumal and co (BID ID -3312868)

jk construction (BID ID -3313776)

T SANJEEV KUMAR (BID ID -3314576)