SOR DISCOUNT TENDER FOR CONSTRUCTION OF BUILDING FOR PIPELINE TRAINING CENTRE AT JOBNER

To, REQUEST FOR QUOTATION

M/s. BPCL ESTIMATE Collective RFQ Number/ Purchase Group

MUMBAI . India - 400038. 1000468119 / L33-Me,Civ&CP PPL Ser

Ph:,Fax:. Contact person/Telephone

Vendor Code:300648 ANKIT KUMAR NATH/-

Email:[email protected]

RFQ No/Date: 6001976918 / 30.10.2026 Quotation Due Date/Time:13.11.2026/14:00:00

Material/Services required at:

M/s. KJPL JOBNER PPL PLANT

Bharat Petroleum Corporation Ltd.

VILLAGE ASALPUR

PHULERA JAIPUR Jaipur-

Subject: CONSTRUCTION OF BUILDING FOR PIPELINE TRAINING CENTRE AT JOBNER

Please quote your lowest prices for the supply of materials/services as per

details given below. The quotation shall show separately and clearly (without

any corrections) the basic price, discount (%), packing & forwarding (%), GST,

freight(%), other charges, etc against each item separately, as applicable.

Foreign vendors shall always quote their FOB prices against each item.

Rates/charges quoted in the quotation shall be final and no additional

charges/corrections will be accepted after the receipt of quotation unless the

same is necessitated by BPCL in writing.

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

00010 Earthworks 31.08.2027

The item 00010 covers the following services:

. . . EXCV<1.5 ORD DIS OUT (Cubic meter)

Earth work in excavation upto required depth below existing ground level

upto required depth including removal of vegetation,shrubs and debris cutting

and dressing the sides in slopes and bottom, levelling, grading and ramming

of bottoms, bailing out of water , supplying of Temporary supports to

existing services line like water pipes,sewage pipes,electric overhead and

u/g cables etc all if encountered, shoring, strutting, backfilling in

foundation trenches/plinth beam/under the floors etc. compacting by the side

of the foundation as directed by the Engineer in Charge including spreading,

watering and compaction using suitable compactors. The measurement of the

excavation would be based on actual depth of excavation with applicable rate

for different depths. Payment to be made as per excavation plan only.No

payment would be made for extra excavation for making slopes etc.(Payment

against this item shall be released only for the earth being disposed.

Disposal shall be done outside BPCL premises)Depth upto 1.5 M normal soil

Page 1 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 10: Unit basic rate in words ________________________________

. . . EXCV<3 ORD DIS OUT (Cubic meter)

Earth work in excavation upto required depth below existing ground level

upto required depth including removal of vegetation,shrubs and debris cutting

and dressing the sides in slopes and bottom, levelling, grading and ramming

of bottoms, bailing out of water , supplying of Temporary supports to

existing services line like water pipes,sewage pipes,electric overhead and

u/g cables etc all if encountered, shoring, strutting, backfilling in

foundation trenches/plinth beam/under the floors etc. compacting by the side

of the foundation as directed by the Engineer in Charge including spreading,

watering and compaction using suitable compactors. The measurement of the

excavation would be based on actual depth of excavation with applicable rate

for different depths. Payment to be made as per excavation plan only.No

payment would be made for extra excavation for making slopes etc. (Payment

against this item shall be released only for the earth being disposed.

Disposal shall be done outside BPCL premises) Depth >1.5 BUT <3.0 M in normal

Service Item 20: Unit basic rate in words ________________________________

. . . S/F MURRUM (Cubic meter)

Supplying and Filling murrum obtained from approved quarries free from all

organic vegetation and foreign matter including all royalities, taxes,

handling and transportation to site, spreading in layers not exceeding 150 mm

thick inside BPCL premises, watering,compacting by suitable compactors. The

density to be achieved shall not be less than 90% of the density obtained in

the laboratory (modified proctor method) . Murrum having standard proctor

laboratory maximum dry density of less than 1.8 gms/cc shall not be used. The

murrum shall have a Plasticity Index of 7-17(medium Plastic) and not more than

20% Fines,i.e., Clay. Particle size grading shall be 20mm and down size.

Page 2 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 30: Unit basic rate in words ________________________________

EWK ANTI-TERMITE . ANTITERMITE TREATMEN (Square meter)

Providing and injecting chemical emulsion for Pre-Constructional anti-termite

treatment and creating a chemical barrier under and all round the column pits,

wall trenches, top surface of plinth filling, junctions of wall and floor

along the external perimeter of plinth protection of the building, expansion

joints, surrounding of pipes and conduits etc. complete as per IS-SP

(part II) 1971 with Chlorpyriphos/Lindane EC 20% with 1% concentration

including a guarantee of adequacy of anti termite treatment for 10 years after

its completion.Rate to be valid for two course treatment at foundation level

(pile capping) and plinth level. The measurement will be based on the plinth

area of the building at Gr. floor level for the buildings and width of the sub

base coarse (rubble masonry) for compound wall only. Agency will be as

approved by the Clients/Architects. (The payment shall be made in phases on

pro rata basis.)

Service Item 40: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00020 Concrete works 31.08.2027

The item 00020 covers the following services:

. . . PCC PLIN 1:1.5:3 MS (Cubic meter)

Page 3 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto

plinth level in foundations,drains,fillings, non-suspended floors, pavements &

ramps or any other works etc.including the cost ofposition cement concrete of

specified grade including the cost ofcentring and shuttering, tamping,

ramming, vibrating,curing, in anyshape,position,thickness and finishing the

top surface rough or smooth,etc. all complete as per directions of

Engineer-in-charge. - All work upto plinth levelManufactured sand is permitted

based on meeting the acceptance criteria1:1.5:3 (1 cement: 1.5 coarse sand:

grade stone aggregate 20 mm nominal size)

Service Item 10: Unit basic rate in words ________________________________

PCC AB PL MS1:1.5:3 (Cubic meter)

Providing and laying PLAIN CEMENT CONCRETE for all heights above plinth level

in foundations,drains,fillings, non-suspended floors, pavements & ramps or any

other works etc.including the cost ofposition cement concrete of specified

grade including the cost ofcentring and shuttering, tamping, ramming,

vibrating,curing, in anyshape,position,thickness and finishing the top surface

rough or smooth,etc. all complete as per directions of Engineer-in-charge. -

All work above plinth leve l Manufactured sand is permitted based on meeting

the acceptance criteria

1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregate 20 mm nominal

Service Item 20: Unit basic rate in words ________________________________

BLD DPC 1:1.5:3 DPC MSAND1:1:5:3 50 (Square meter)

Providing and laying damp-proof Course (DPC) of specified thickness with

cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate

12.5 mm nominal size ) and mixing approved water proofing compound @ 1 lit/1

kg per cement bag or as per manufacturer specifications including

shuttering/curing and finishing the top surface smooth complete.

Supplying and laying damp-proof Course (DPC) of specified thickness with

cement concrete of specified ratio with stone aggregate 12.5 mm nominal size

and mixing approved waterproofing compound @ 1 lit/1 kg per cement bag or as

Page 4 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

per manufacturer specifications including shuttering/curing and finishing the

top surface smooth complete. Manufactured sand is permitted based on meeting

the acceptance criteria. The DPC shall be laid in 2 layers. 1:1.5:3 (1 cement:

1.5 m sand: 3 grade stone aggregate 12.5 mm nominal size) 50mm thick

Service Item 30: Unit basic rate in words ________________________________

RCC DSGN-M M25 BL PL (Cubic meter)

Providing machine batched, machine mixed, and machine vibrated reinforced

Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile

Concrete Batching/Mixing Plant at site or RMC from approved plants) using

mm and down graded crushed stone aggregate and coarse sand /M-sand (provided

M-Sand meets the codal requirements) and approved admixtures of approved

quality in sub structure of all types including placing of concrete, supplying

pockets, openings, recesses, chamfering wherever required etc.; vibrating,

tamping, curing etc. to give a smooth and even surface etc. all complete for

all depth below plinth level in any shape, position, thickness etc. all

complete as per drawings, specified and directed by Site In charge. Provisions

of BIS codes and tender specifications to be referred for mix design,

transportation, placement, curing etc. Reinforcement will be paid in separate

item; however, cost of centering / shuttering is included in this item.

Service Item 40: Unit basic rate in words ________________________________

RCC AB PL 1:1.5:3MS (Cubic meter)

Supplying and laying in postion RCC of specified nominal mix using 20mm

anddown size graded crushed stone aggregate, coarse sand / M-Sand (provided

M-Sand meets the codal requirements) for columns, beams slabs and soffits,

staircases, lintels etc.of all typesincluding placing of concrete,supplying

pockets,openings, recesses,rendering if reqd. to give a smooth and even

surface etc. all complete(excluding the cost of reinforcement, but including

the cost of centringand shuttering)for all heights above plinth level in any

shape,position, thickness etc. all complete as specified and directed.

Provisions of BIS codes and tender specifications to be referred for mix

design, transportation, placement, curing etc. Reinforcement will be paid in

separate item; however, cost of centering / shuttering is included in this

Page 5 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregate 20 mm nominal

Service Item 50: Unit basic rate in words ________________________________

. . . REINFORCEMENT EPOXY (Kilogram)

Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming

to IS 1786 with protective fusion bonded epoxy coating as per IS13620, in

position for RCC worksincluding straightening, cutting, bending, placing in

position andbinding with 16 SWG black soft annealed binding wire at

everyintersection, supplying and placing appropriate cover block all

completeincluding cleaning and making it free from oil, grease etc.

complete-for all heights and depths and conforming to relevant IS code (Make:

SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to

Service Item 60: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00030 Brick Masonry and plastering works 31.08.2027

The item 00030 covers the following services:

. . . BRK MSN PL MS CL75 (Cubic meter)

BRICK MASONRY BELOW PLINTH Providing and laying Brick work withbricks having

Page 6 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

compressive strength not less than specified and conforming to BIS std. of

specified class and above, satisfying efflorescene,water absorbtionand

dimension test as per IS code) infoundation and plinth in Cement mortar 1:5(1

cement: 5 m sand) asper specifications in one or more brick thickness

including soaking of bricks, providingopenings, recesses ,scaffolding,staging,

curing, finishing the jointsflush below ground level and raking out joints

etc. all complete, as perdirections of Engineer-in-charge.M.sand is permitted

based on meeting the acceptance criteriaCL 75 (BIS Class 75, Compressive

strength 75 kg/cm2)

Service Item 10: Unit basic rate in words ________________________________

. . . BRK MSN AB PL CS C75 (Cubic meter)

BRICK MASONRY ABOVE PLINTH , Supplying and laying Brick work in superstructure

aboveplinth level including supplying and laying good quality bricksconforming

to BIS std. of specified class and above, satisfying efflorescene,water

absorbtion and dimension test as per IS code) in superstructureusing Cement

Mortar 1:5(1part cement : 5 part coarse sand) includingraking out joints,

curing, soaking of bricks, providing

recesses,openings,scaffolding,staging,curing,raking out joints etc. complete

CL 75 (BIS Class 75, Compressive strength 75 kg/cm2)

Service Item 20: Unit basic rate in words ________________________________

PLASTER 12MM MS 1:5 (Square meter)

CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of

base surfaces, scaffolding,curing,finishing etc. all complete for all heights

as per specifications and directions of Engineer-in-charge including grooves,

bands, drip moulder where ever required as specified. also including providing

20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting

points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U"

type nails before plastering.(Payment will be made separately for chicken wire

mesh). Well Graded mix of fine and coarse sand or equivalent well graded

Manufactured Sand can be permitted to use in place of coarse sand, provided

Page 7 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Manufactured Sand meets the gradation and other codal acceptance criteria.

12mm thick with 1:5 (1 cement: 2 parts of fine sand: 3 parts of coarse sand)

Service Item 30: Unit basic rate in words ________________________________

PLASTER 18MM MS 1:5 (Square meter)

CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of

base surfaces, scaffolding,curing,finishing etc. all complete for all heights

as per specifications and directions of Engineer-in-charge including grooves,

bands, drip moulder where ever required as specified. also including providing

20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting

points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U"

type nails before plastering.(Payment will be made separately for chicken wire

mesh). Well Graded mix of fine and coarse sand or equivalent well graded

Manufactured Sand can be permitted to use in place of coarse sand, provided

Manufactured Sand meets the gradation and other codal acceptance criteria.

18mm thick with 1:5 (1 cement: 2 parts of fine sand: 3 parts of coarse sand)

Service Item 40: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00040 Painting works 31.08.2027

The item 00040 covers the following services:

. . . BLD PNT SNOWCEM 2C (Square meter)

"Preparing surface and painting of approved make, shade and quality in all

Page 8 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush &

sand paper, curing and supply of all materials and labour complete. The

finished surface shall be even and uniform.The application of paint shall

conform to Manufacturer's recommendation and as per the directions of

Enginner-in-Charge.

2 coats of Cement Paint of Snowcem or equivalent make"

Service Item 10: Unit basic rate in words ________________________________

. . . BLD PNT EMULSION (Square meter)

"Preparing surface and painting of approved make, shade and quality in all

heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush &

sand paper, curing and supply of all materials and labour complete. The

finished surface shall be even and uniform.The application of paint shall

conform to Manufacturer's recommendation and as per the directions of

Enginner-in-Charge.

2 coats of Plastic Emulsion Paint conforming to IS 5411."

Service Item 20: Unit basic rate in words ________________________________

. . . BLD PNT ACRYLIC EMUL (Square meter)

"Preparing surface and painting of approved make, shade and quality in all

heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush &

sand paper, curing and supply of all materials and labour complete. The

finished surface shall be even and uniform.The application of paint shall

conform to Manufacturer's recommendation and as per the directions of

Enginner-in-Charge.

Page 9 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

2 coats ACRYLIC EMULSION"

Service Item 30: Unit basic rate in words ________________________________

. . . WATERPROOF CMT+BRK (Square meter)

Roof Treatment :Providing and laying integral cement based water proofing

treatment for terraces including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement using

kg/m2 of cement admixed with water proofing compound conforming to IS :2645

over RCC slab including cleaning of surface before the treatment. (b) Laying

broken bricks/brick bats of 25mm to 100mm size with 50% of cement mortar 1:5

admixed with water proofing compound and providing 20 mm thick layer of cement

mortar 1:5 admixed with water proofing compound to required slope, treating

adjoining walls upto 300 mm height including rounding of junctions of walls

and slabs etc. The cement mortar to be prepared with miminum 30% replacement

of OPC with fly ash by weight of cement.

Service Item 40: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00050 Ceiling and Flooring works 31.08.2027

The item 00050 covers the following services:

VITRIFD 1200X1200X12 (Square meter)

Page 10 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Supplying and laying vitrified ceramic tiles with water absorption less than

0.08% and conforming to IS : 15622, of approved make, colour and design at

all levels and locations using approved first quality tiles in flooring with

or without spacers, laid over a bedding of cement mortar bed of mix 1:4 to

achieve overall flooring thickness as 50mm and a backcoat of white cement

slurry and joints filled with white cement mixed with matching pigment

complete with all bye works like covering with plaster of paris, curing etc.

at all leads and lifts and as per specification / instructions of the Engineer

Incharge.Using 1200mm x 1200mm x minimum 12mm thk."

Service Item 10: Unit basic rate in words ________________________________

SKIRTING 1200X200X12 (Square meter)

Supplying and laying vitrified ceramic tiles with water absorption lessthan

0.08% and conforming to IS : 15622, of approved make, colour anddesign at all

levels and locations using approved first quality tiles inskirting with or

without spacers, laid using approved tile fixingadhesive and joints filled

with white cement mixed with matching pigmentcomplete with all byeworks,

curing etc. at all leads and lifts and asper specification / instructions of

the EngineerIncharge.Using 1200mm x 80-200mm x minimum 12mm thk."

Service Item 20: Unit basic rate in words ________________________________

. . . CERAMIC TILES 8MM (Square meter)

FLOORING CERAMIC TILES GLAZED/MATT Provding and fixing glazed screen ceramic

printed tiles conforming to IS 15622 of minimum thickness 8mm of approved

desigh;colour,size and shade in floor, skirting, risers of steps and dados on

12mm thick cement plaster 1:3( 1 cement :3 coarce sand ) jointed with white

cement slurry mixed with matching pigment including cleaning finished

surface with Oxalic acid, wax polishing,etc . complete.

Service Item 30: Unit basic rate in words ________________________________

Page 11 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

AL FALSE CEILNG PNL (Square meter)

Providing and fixing powder coated aluminium work (minimum thickness of powder

coating 50 micron) consisting of tee / angle sections, of approved make

conforming to IS : 733 in frames of false ceiling including aluminium angle

cleats, with aluminium panels with necessary C.P. brass / stainless steel sunk

screws, aluminium perimeter angles fixed to wall with stainless steel rawl

plugs @ 450mm centre to centre and fixing the frame work to G.I. level

adjusting hangers 6mm dia. with necessary cadmium plated machine screws all

complete as per approved architectural drawings and direction of the

Engineer-in-Charge (level adjusting hangers, ceiling cleats and expansion hold

fasteners to be paid for separately).

Service Item 40: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00060 Window & Door works 31.08.2027

The item 00060 covers the following services:

. . . DBL SHUTTER POWDER (Square meter)

"Providing and fixing pressed steel sheet door shutter consisting of 18 SWG

pressed steel sheet bent to form hollow box of 40mm overall thickness, mitred,

welded at meeting with 6mm thick M.S. flat all along the perimeter, forming

square edges at corners and braced with channel shaped, 35mm wide 16 SWG M.S.

sheet horizontal stiffener @ 500mm max. including providing heavy duty

150mm long M.S. butt hinges conforming to IS : 1341 @ 600mm max. spring loaded

pressure die cast zinc alloy door stopper, for each shutter, providing

approved shade electrostatic powder coating (25 micron) /2 coats of Synthetic

Page 12 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

enamel painting (approved shade ICI or approved equivalent) over approved

quality red oxide zinc chromate primer coating for all the metallic surfaces

etc. all complete.

Double shutter with 3-way spring loaded locking and latching system and

pressure dia cast zinc alloy door handles 300mm long on both sides. Painted

with Electrostatic powder coating. "

Service Item 10: Unit basic rate in words ________________________________

. . . SNG SHUTTER POWDER (Square meter)

"Providing and fixing pressed steel sheet door shutter consisting of 18 SWG

pressed steel sheet bent to form hollow box of 40mm overall thickness, mitred,

welded at meeting with 6mm thick M.S. flat all along the perimeter, forming

square edges at corners and braced with channel shaped, 35mm wide 16 SWG M.S.

sheet horizontal stiffener @ 500mm max. including providing heavy duty

150mm long M.S. butt hinges conforming to IS : 1341 @ 600mm max. spring loaded

pressure die cast zinc alloy door stopper, for each shutter, providing

approved shade electrostatic powder coating (25 micron) /2 coats of Synthetic

enamel painting (approved shade ICI or approved equivalent) over approved

quality red oxide zinc chromate primer coating for all the metallic surfaces

etc. all complete.

Single shutter with 3 way spring loaded locking and latching system. Painted

with Electrostatic powder coating."

Service Item 20: Unit basic rate in words ________________________________

. . . DOOR FRAME POWDER (Meter)

"Providing and fixing Pressed steel door,window & ventilator frames conforming

to IS : 4351 made of 16 SWG pressed steel sheet bent to shape as per

drawing,using bending machine to form solid, true edges/corners, stiffened

with 50mm x 5mm thick M.S. flat

spacers welded to the frame facing the wall/column @ max.600mm c/c including

fixing the frame with masonry/RCC/metal frame work for partitions etc. by

Page 13 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

means of 300mm x 25mm x 6mm M.S. holdfasts welded to spacers and grouted with

M-15 grade concrete in min.

350mm x 100mm x 100mm sized hole in masonry/96 mm long 12mm dia dash

fasteners, bolting with metal frame work, making provisions for hinges,

locking devices, other hardwares by machine cutting and providing 3mm thick

M.S. pad plates at all areas of hardware fixation, welding etc. painting of

all metallic surfaces by 2 coats of synthetic enamel paint (approved shade,

ICI or approved

equivalent over red oxide zinc chromate primer/electrostatic powder coating of

approved shade ,25 micron), finishing etc. all complete. For frame size

(assorted size out of) Overall 125mm x 60mm Section.

S/F Frames painted with Electrostatic powder coating. "

Service Item 30: Unit basic rate in words ________________________________

. . . WOOD DOOR PLYWOOD (Square meter)

Providing and fixing Factory made, overall 35mm thick block board flush

shutter consisting of solid core block board bonded with phenol phormaldehyde

synthetic resin conforming to IS : 848 and faced on both faces with commercial

type plywood/teakwood veneering/ lamination bonded with phenol formaldehyde

synthetic resin conforming to IS : 848, ncluding providing and fixing `T' type

second class teakwood perimeter beading fixed by means of approved quality

neoprene based adhesive and nailing @ 300 mm max.. painting exposed surface

with two coats of approved shade and make synthetic enamel paint over approved

quality primer coat, providing and fixing 125mm long M.S. butt hinges [for

each shutter (vertical spacing not exceeding 600mm)] including fixing with

door frame, finishing etc. all conforming to IS : 2202. Door shutter faced

with approved quality 1mm thick teakwood veneering conforming to IS : 303, BS

Service Item 40: Unit basic rate in words ________________________________

. . . DOOR CLOSER OVERHEAD (each)

"Supplying and Fixing Sleek Model heavy duty Hydraulic Door CloserEverlite /

Page 14 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Gamish / Hyper make with ISI mark and conforming to IS 3564 and with

necessary screws, fixing to the aluminium / glass / woodendoor complete as per

specifications including all labour, transporting etc. at all leads andlifts

and as directed by the Engineer-in-charge complete."

Service Item 50: Unit basic rate in words ________________________________

. . . HYDRAUL FLOOR SPRING (each)

"Supplying and fixing heavy duty double action hydraulic floor springs of

approved make with ISI mark and conforming to IS 6315 , pivoting and all other

arrangements including cost of cutting floors,S.S cover Plates withbrass

pivots etc. complete and other necessary accessories

required for the works to facilitate smooth operation of the doorshutter at

all leads and lifts, all as directed by the Engineer-incharge.

Double action floor spring"

Service Item 60: Unit basic rate in words ________________________________

. . . AL PARTITION POWDER (Kilogram)

"Supplying & fixing in position FOR SHUTTERS OF DOORS, WINDOWS & VENTILATORS

of aluminium partitions, doors, windows,ventilators, louvres, fixed glazing,

sliding windows, north

lighting glazing, aluminium rough ground etc. with extruded & integral colour

powder coating ( 50 microns) , Aluminium sections,

powder coated Aluminium beadings,powder coated Aluminium profile panelsheets,

manufactured to IS 733, IS 1285 and other relevant codes & using

minimum 2mm thick (or as specified) heavy sections from approvedmanufacturer

including cost of supplying required no. of heavy

duty stainless steel butt hinges, pivots, approved door and windowshandles,

EPDM Gasket, PVC/Neoprene Gasket Lining,

Stainless steel screws, mastic filling, weather strips, tower bolts,nuts,

washers, rollers etc. as required and as per drawing etc. all

complete at all heights and as directed by the Engineer-in-Charge. Therate

shall also include giving a coat of bitumastic paint on the

Page 15 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

aluminium surfaces in contact with masonry / concrete and closing thegaps

around the frame and the adjoining surface with

approved silicone sealant on both faces to achieve watertightness.

1. No extra payment will be made for all non-aluminium consumable itemslike

screws, gasket, weather strips, PVC/Neoprene lining and butthinges, tower

2. Glazing, Particle Boards, aluminium grills, mesh etc. will bemeasured and

paid separately under relevant item.

3. All fitting shall be of matching colour powder coated aluminiumsections.

4. The aluminium sections shall be smooth, rust free, straight, mitredand

jointed mechanically wherever required

including cleat angles at no extra cost."

Service Item 70: Unit basic rate in words ________________________________

. . . TOUGHENED GLASS 10MM (Square meter)

"Supplying & fixing toughened glass of approved make of following thicknessin

windows, doors, ventilators, partitions

etc. with necessary clips, beadings, EPDM rubber/ neoprene gasket etc.

complete as per the directions of Engineer-in-Charge. Only the clear opening

of glass shall be measured for payment. (Make: Modi, SaintGobain or

Service Item 80: Unit basic rate in words ________________________________

. . . TOUGHENED GLASS 5MM (Square meter)

"Supplying & fixing toughened glass of approved make of following thicknessin

windows, doors, ventilators, partitions

etc. with necessary clips, beadings, EPDM rubber/ neoprene gasket etc.

complete as per the directions of Engineer-in-Charge. Only the clear opening

of glass shall be measured for payment. (Make: Modi, SaintGobain or

Page 16 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 90: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00070 electrical works 31.08.2027

The item 00070 covers the following services:

. . . S/LAYFY 3CX16 MM2 (RUNNING METER)

POWER CABLES A2XFY : Supplying, Laying; Testing and Commissioning Of 1.1 Kv

Grade Cables XLPE insulated; Pvc Sheathed; FRLS Armoured Aluminium Conductor

Cables of Following Sizes As Per IS 7098 Part I and Sealed properly with Pvc

Caps In Built-Up Ready Made Trenches; Overhead Cable trays;Pull through Pipes

Or Exposed On Wall .Beam/Rakes; Trusses Tie/Beam or Embedded In Floor Or

buried Directly Underground (Excavation, sand and bricks shall be paid under

seperate item of BOQ) Or Through G. I.Pipe.Unit Rates Quoted For

Installationof Cables Shall Be Same Irrespective Of Route and Method Of

Laying. The rates Shall Include Laying, Pulling Of Cables, Proper Dressing Of

Cables on Cable Trays, Racks, Vertical Raceways and Supply and Installation Of

saddles, Spacers and Chord For Tying As Required, aluminium Clamps. etc. Cable

Identification Tags At Strategic Points/ Every 50 Meter Interval For

Identification Of Cable; Etc. Complete.The Straight Through Joints/ tying with

armour In The Cables Should Be avoided.3 CORE X 16 MM SQ. AYFY

Service Item 10: Unit basic rate in words ________________________________

Page 17 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

. . . TRENCH EX SAND BK450 (RUNNING METER)

Excavating trench 750 mm deep, 450 mm wide for laying cables, supplying and

filling sand 150 mm on top and 150 mm below the cable, minimum 75mm thick

Class B brick protection on the top of the cable, back filling the trench

after laying cables, earth strips, etc. Finishing the top after consolidation

including levelling of surplus soil from the site of ercetion as per direction

of Engineer-in-charge."

Service Item 20: Unit basic rate in words ________________________________

S/I NFLP LDB 63A -12 (Number)

Supply, installation, testing and commissioning of the following type of Non

FLP Lighting Distribution Boards with minor grouting, fasteners on structures

and ready made mounted poles. structural steel and poles would be paid in

other items of BOQ . The job includes connection, internal wiring, unarmoured

cable and supply of all hardware required for the installation of Non FLP

LDB. Cable termination and connection,supply and fixing of cable glands with

lugs,ferrules as required including all materials,labors complete. Safe Area,

WP, IP-65 Lighting Distribution Board (25kA, 1 sec) with 63A 4P MCB+ RCBO

incomer and 12 Nos of 6A DP MCB outgoing with separate chamber for incomer and

outgoing cables and for incomer and outgoing switch gear with canopy and stand

complete. Non-FLP LDB shall be as per IS/IEC

Service Item 30: Unit basic rate in words ________________________________

. . . INST LT PANEL (Cubic meter)

"Installation, testing and commissioning of LT switch boards including leading

from yard, unpacking, coupling sections together, minor grouting on to ready

made trench with ready made supports including drilling the supports and

fastening the board support fasteners, inter panel wiring if any with ferrules

as per diagram, relay testing and calibration of all relays and meters to the

extent required for precommissioning as per insructions of EIC:

Page 18 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Cubicle type single/ double front/ fixed/ drawout Electrical Panels of type

PCC/ PMCC/ MCC/ MLDB/ PDB/ Marshalling Box/ PLC / UPS/ DC DB/ APFC/ Critical

Panel/ SKID/ Wall mounted panels etc"

Service Item 40: Unit basic rate in words ________________________________

. . . LED 2X2 SURF 18 WHAD (Number)

Supply and Fixing of Surface mount mounting direct/indirect LED 2x2 luminaire,

White powder coated CRCA housing with LEDs. Curvilinear reflector for uniform

flow of light around the central lighting core

18 W Neutral White with acrylic dissipator

Service Item 50: Unit basic rate in words ________________________________

. . . LED TUBE 1X18 OT (Number)

"Supply & Installation of LED TUBE LIGHTS complete with fittings with

specified Wattage. Itshould be made out of high quality materials and

complying with industrial standardpractices to ensure high reliability and

long life. The entire LED TUBE LIGHTS shall becapable of withstanding stresses

and vibrations likely to be encountered in outdoorconditions by having

necessary design/strength and protections inbuilt in itselectronics within the

specified electrical parameters of the product. TUBE LIGHTS shouldbe provided

with High quality long lasting PMMA poly acrylic front cover that should

bedistortion free, heat Resistant, Toughened, UV stabilized fixed to the

extruded linearcast Aluminium frame.The LED light fixtures should be

conforming to the standard specifications and indicative models. All fixtures

should be provided with motion sensors for enhanced power efficiency

Batten type 1x18 Watt surface mount LED tube light open type"

Page 19 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 60: Unit basic rate in words ________________________________

S/I NFLP LDB 63A -8 (Number)

Supply, installation, testing and commissioning of the following type of Non

FLP Lighting Distribution Boards with minor grouting, fasteners on structures

and ready made mounted poles. structural steel and poles would be paid in

other items of BOQ . The job includes connection, internal wiring, unarmoured

cable and supply of all hardware required for the installation of Non FLP

LDB. Cable termination and connection,supply and fixing of cable glands with

lugs,ferrules as required including all materials,labors complete. Safe Area,

WP, IP-65 Lighting Distribution Board (25kA, 1 sec) with 63A 4P MCB+ RCBO

incomer and 8 Nos of 6A DP MCB outgoing with separate chamber for incomer and

outgoing cables and for incomer and outgoing switch gear with canopy and stand

complete. Non-FLP LDB shall be as per IS/IEC

Service Item 70: Unit basic rate in words ________________________________

S/I FLP DB 63A -6 OG ()

Supply, installation, testing and commissioning of the following type of FLP

DIstribution Boards with minor grouting, fasteners on structures and ready

made mounted poles. structural steel and poles would be paid in other items of

BOQ . All fittings shall be approved by CMRI/ PESO with numbers embossed on

the equipments and certificates should be supplied along with the equipments.

The job includes connection, internal wiring, unarmoured cable and supply of

all hardware required for the installation of FLP DB. Cable termination and

connection,supply and fixing of cable glands with lugs,ferrules as required

including all materials,labors complete.These FLP & WP items shall be as per

IS/IEC-60079 & IS/IEC-60529 Zone-1, Ex-D Gas Group IIA, IIB, IP-66, FLP AND

WP Lighting Distribution Board with 63A 4P MCB+ RCBO incomer and 6 Nos of 6A

DP MCB outgoing with separate chamber for incomer and outgoing cables and for

incomer and outgoing switch gear with canopy and stand complete. FLP DB shall

be as per IS/IEC -60729 & IS/IEC

Page 20 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 80: Unit basic rate in words ________________________________

S/I FLP DB 40A -6 OG ()

Supply, installation, testing and commissioning of the following type of FLP

DIstribution Boards with minor grouting, fasteners on structures and ready

made mounted poles. structural steel and poles would be paid in other items of

BOQ . All fittings shall be approved by CMRI/ PESO with numbers embossed on

the equipments and certificates should be supplied along with the equipments.

The job includes connection, internal wiring, unarmoured cable and supply of

all hardware required for the installation of FLP DB. Cable termination and

connection,supply and fixing of cable glands with lugs,ferrules as required

including all materials,labors complete.These FLP & WP items shall be as per

IS/IEC-60079 & IS/IEC-60529 Zone-1, Ex-D Gas Group IIA, IIB, IP-66, FLP AND WP

Lighting Distribution Board with 40A 4P, MCB+RCBO incomer and 6 Nos of 6A DP

MCB outgoing with separate chamber for incomer and outgoing cables and for

incomer and outgoing switch gear with canopy and stand complete. FLP DP shall

be as per IS/IEC -60729 & IS/IEC

Service Item 90: Unit basic rate in words ________________________________

S/I GI PIPE 50MM (RUNNING METER)

GI PIPES IN WALLS, FLOORS,ETC: Supplying and fixing of medium class,

Galvanized Iron conduits for cable Protection, etc/pulling on wall or

structures or through Floors/Walls including chipping or Breaking of

Floor/Walls and making good the same. Installation charges shall include

cutting, Threading, Welding/Joints, Bending of Pipes. All Consumables such as

GI Clamps, along with associated fixing Hardware,fittings; Sockets, Junction

boxes, Bends, couplers, casing, capping, tees, Elbows, Saddles, Screws, Bushes

Etc. is in the Scope of the contractor. Sealing with Fireproof/Waterproof

Compund wherever required shall be carried out by the Contractor. 50 MM

Page 21 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 100: Unit basic rate in words ________________________________

GI PERF TRAY 6" (RUNNING METER)

PERFORATED TYPE CABLE TRAYS WITHOUT GI COVER :Supplying and Installation of

GI Perforated (Perforation not more than 17.5%) Cable Trays without GI cover

as per IEC 61537 (Hot Dipped Galvanised @ 55 micron as per ISO 1461) of

following sizes with accessories and GI Hardware (Coupler Plates, Nuts,Bolts,

Washers) . The scope also involves Supply and installation of all Cable Tray

accessories like Bends, Tee Joints, Elbow Up/Down, Reducers, Fishplates,

Splices, Cross Member, Connectors, etc. and no separate charges will be

applicable,even though only straight Lengths are indicated below. Cable Tray

Bends shall be manufactured type and not facbricated at site. Structural

supports for the cable tray shall be paid under seperate items of BOQ.Design

of Structural supports should be submitted by vendor and approved by BPCL

prior to installation. 150X 50X2MM

Service Item 110: Unit basic rate in words ________________________________

. . . POINT WIRE >10M (Number)

"POINT WIRING :Supply & Laying primary Point Wiring from Switch Board to the

lighting Fixture/Celing Fans Exhaust Fans/Call Bell lamps/ by means of 3 runs

of 1.5 sq.mm. PVC FRLS 650 Volts/1100 Volts grade ISI approved & ISI marked.

PVC Insulated Stranded copper Conductor through existing recessed/Surface

Conduits in an approved manner. This Shall Include the supply & Installation

of Single Pole 5-Amps Modular Switch of approved Make in modular recessed box

complete with all labour and materials for the following distances (Supply of

Modular Recessed Box not in scope)

Service Item 120: Unit basic rate in words ________________________________

Page 22 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

. . . S/L CAB 4CX2.5MM2 (RUNNING METER)

"Cables :Supplying, Laying; Testing and Commissioning Of 1.1 Kv Grade Cables ;

Pvc/XLPEinsulated; Pvc Sheathed; FRLS Armoured copper Conductor Cables of

Following Sizes As Per Is:1554 (Part-I), IS 7098 Part I & IS 1225-Latest

Version and Sealed properly with Pvc Caps In Built-Up Ready Made Trenches;

Overhead Cable trays;Pull through Pipes Or Exposed On Wall .Beam/Rakes;

Trusses Tie/Beamor Embedded In Floor Or buried Directly Underground

(Excavation, sand and bricks shall be paid under seperate item of BOQ) Or

Through G. I.Pipe.Unit Rates Quoted For Installationof Cables Shall Be Same

Irrespective Of Route and Method Of Laying. The rates Shall Include Laying,

Pulling Of Cables, Proper Dressing Of Cables on Cable Trays, Racks, Vertical

Raceways and Supply and Installation Of saddles, Spacers and Nylon Chord For

Tying As Required,Identification Tags At Strategic Points/ Every 50 Meter

Intervales,aluminium Clamps. etc. Cable Identification Tags At Strategic

Points/ Every 50 Meter Interval For Identification Of Cable; Etc. Complete.The

Straight Through Joints/ tying with armour In The Cables Should Be avoided.

Procedure for laying of LT cables.MAKES/SPECIFICATIONS

4x2.5 MM SQ 2XWY."

Service Item 130: Unit basic rate in words ________________________________

. . . S/L CAB 3CX1.5MM2 (RUNNING METER)

"Cables :Supplying, Laying; Testing and Commissioning Of 1.1 Kv Grade Cables ;

Pvc/XLPEinsulated; Pvc Sheathed; FRLS Armoured copper Conductor Cables of

Following Sizes As Per Is:1554 (Part-I), IS 7098 Part I & IS 1225-Latest

Version and Sealed properly with Pvc Caps In Built-Up Ready Made Trenches;

Overhead Cable trays;Pull through Pipes Or Exposed On Wall .Beam/Rakes;

Trusses Tie/Beamor Embedded In Floor Or buried Directly Underground

(Excavation, sand and bricks shall be paid under seperate item of BOQ) Or

Through G. I.Pipe.Unit Rates Quoted For Installationof Cables Shall Be Same

Irrespective Of Route and Method Of Laying. The rates Shall Include Laying,

Pulling Of Cables, Proper Dressing Of Cables on Cable Trays, Racks, Vertical

Raceways and Supply and Installation Of saddles, Spacers and Nylon Chord For

Tying As Required,Identification Tags At Strategic Points/ Every 50 Meter

Intervales,aluminium Clamps. etc. Cable Identification Tags At Strategic

Points/ Every 50 Meter Interval For Identification Of Cable; Etc. Complete.The

Straight Through Joints/ tying with armour In The Cables Should Be avoided.

Page 23 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Procedure for laying of LT cables.MAKES/SPECIFICATIONS

3x1.5 MM SQ 2XWY."

Service Item 140: Unit basic rate in words ________________________________

S/I GI PIPE EARTHING (each)

EARTHING :Supplying, providing and constructing GI Pipe Earth electrodes as

Per IS:3043-(Latest), BPCL Earthing drawing; 100 mm Dia;GI Pipe Medium

Class'B' 3500 mm long complete (out of this length 3000mm shall be burried

inside ground) with Earth Pit and all necessary materials including excavation

of Earth Pit, filling with homogeneous layer of Charcoal and salt, Back

filling, providing necessary Cement concrete chamber (1:1.5:3) of minimum

mm thickness, Plastering, Cast Iron cover hinged to C. I. Frame fixed with

wire mesh;Test links for connecting the earth Grid and Earth Electrode etc.

complete. This also includes testing of Earth resistance after completion and

must be made within acceptable Limits as per CEA, IS-3043, OISD and submitting

the Test Report To Engineer- in -charge. Minimum depth of burial shall be

mm, homogenous hygroscopic material should not be less than 1 cum. & should

cover 300 mm around the electrode up to a height of 2500 mm. The scope of work

also includes providing earth pit markers indicating resistance, test date,

next due date etc. as per std. earthpit boards on GI plate of size @ 300 x300

mmx 2mm thick with a GI hollow section stand of of 25 mm square & length @ 1m;

grouted in PCC 1:4:8 at a depth of @300 mm below the ground level and the top

of plate should be @ 700 mm above the ground level.

Service Item 150: Unit basic rate in words ________________________________

. . . S/I GI STRIP 25X3MM (RUNNING METER)

"Earthing : Supply, laying /installing, connecting and testing following Hot

Dip galvanised wires/ strips of following sizes for grounding the system.

Wire/ strip shall run on wall, Column, Roof, Truss, Tie buried directly

underground at a depth of 600 mm including excavation and backfilling, passing

through installed/ laid pipes, neutral of the system to be embedded in floor.

Installation shall include supply and installation of GI clamps; GI spacers ;

Page 24 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

GI hardware; GI pipe sleeves, binding wires, nuts, bolts, washers, paints,

etc.while passing through wall or coming out of Floor chiseling of wall/Floor

& making it good is also included . The scope shall include connections, end

termination, jointing, supply of fixing clamps, binding wires, bolts, nuts,

washers, paints, etc. The jointing of earth conductors shall be by

bolting/welding/bracing/ soldering be as per IS:2709. The Jointing of strips

shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer

spaced at 50mm. The welded portion shall be covered with bitumen compound.

Conductors required for gland earthing shall be included in the following

items. If separate structural supports, pipes, the same shall be covered by

separate rates. GI coating shall be 85 micron.Double Bolting of GI strips

should be done with SS bolts with required nuts/washers etc.Welding of flats

should be neatly covered with bitumen paint

Service Item 160: Unit basic rate in words ________________________________

. . . S/I GI STRIP 50X6MM (RUNNING METER)

"Earthing : Supply, laying /installing, connecting and testing following Hot

Dip galvanised wires/ strips of following sizes for grounding the system.

Wire/ strip shall run on wall, Column, Roof, Truss, Tie buried directly

underground at a depth of 600 mm including excavation and backfilling, passing

through installed/ laid pipes, neutral of the system to be embedded in floor.

Installation shall include supply and installation of GI clamps; GI spacers ;

GI hardware; GI pipe sleeves, binding wires, nuts, bolts, washers, paints,

etc.while passing through wall or coming out of Floor chiseling of wall/Floor

& making it good is also included . The scope shall include connections, end

termination, jointing, supply of fixing clamps, binding wires, bolts, nuts,

washers, paints, etc. The jointing of earth conductors shall be by

bolting/welding/bracing/ soldering be as per IS:2709. The Jointing of strips

shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer

spaced at 50mm. The welded portion shall be covered with bitumen compound.

Conductors required for gland earthing shall be included in the following

items. If separate structural supports, pipes, the same shall be covered by

separate rates. GI coating shall be 85 micron.Double Bolting of GI strips

should be done with SS bolts with required nuts/washers etc.Welding of flats

should be neatly covered with bitumen paint

Page 25 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 170: Unit basic rate in words ________________________________

SPLIT AC 2T INVT (each)

Supply, installation, testing and commissioning of 5 star rated 2.0 TON

inverter split AC with remote, indoor and outdoor unit, stand for outdoor

unit, stabilser for AC, required copper piping with insulation, civil works,

electrical connection complete of approved make

Service Item 180: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

00080 Misc works 31.08.2027

The item 00080 covers the following services:

. . . HDPE WATER TK 1000L (each)

"supplying and fixing HDPE water tank of approved make with ISI mark

andconforming to IS 12701 and with GI fittings for inlet, outlet, Overflow,

scour float valve, connections of required size and dia. Includingconnections

and hoisting/fixing the same tank on roof and other placesat all heights with

all bye-works complete at all leads and lifts as perdrawings, specifications

and instructions of the Engineer Incharge.

Page 26 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

RFQ Number :6001976918 Date : 30.10.2026

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)

Service Item 10: Unit basic rate in words ________________________________

GALVAL RAIN W PIPE (RUNNING METER)

Supply & fixing of rain water down pipe made of 0.45 mm (Base Metal

Thickness), grade 550 Galvalume steel sheets with coating mass AZ-150 (

GSM aluminium 55% Zinc 43.5% and Silicon 1.5% in weight ratio) of 150 mm X

mm or minimum 7500 sqmm cross-sectional area to be provided and pre-painted on

both sides with Super Durable Polyester (SDP) as per manufactures

specifications of approved colour to match with the existing roofing / gutter.

The Item includes the supply of required accessories for fixing of downpipe be

as per manufacturers recommendation, all consumables, tools, tackles,

provision of safety and manpower required for execution and completion of job

as per instructions of Engineer in Charge. Proper overlap to be provided to

make it leakproof and required integrity.

Payment shall be made on the basis of length of downpipe. Overlaps shall not

Service Item 20: Unit basic rate in words ________________________________

State GST % : ________ % Central GST % : ________ % Integrated GST % : ________ %

Union Ter. GST % : ________ % GST Comp. Cess % : ________ %

HSN Code / SAC Code : ______________

Billing State : ______________

Grand Total (inclusive of all taxes, duties/charges etc)

Page 27 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

TERMS & CONDITIONS

Important Notice

Sr.No Description

001 Quotation received after due date will not be entertained

002 Your quotation must specify exact amount or percentage discount,

GST, Charges, Transport, Packing & forwarding,

etc. as applicable.

003 In case you are unable to quote, kindly send the quotation with a

regret for our records. Non-receipt of a regret will adversely

affect your vendor rating.

004 No quotation will be accepted without your rubber stamp and

005 Your quotation must be strictly in enclosed envelope

indicating Collective RFQ No., RFQ No. and due date.

006 For all future correspondences please mention the vendor code

Collective RFQ Number & RFQ Number.

LIST OF ENCLOSURES

Page 28 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

-------Tear off Portion to be pasted on the envelope containing offer------------

Collective RFQ No. :

Our Reference: Due Date : 13.11.2026

RFQ No. : 6001976918 Due Time : 14:00:00

Subject: CONSTRUCTION OF BUILDING FOR PIPELINE TRAINING CENTRE AT JOBNER

Purchase Group : L33-Me,Civ&CP PPL Ser

Page 29 of 29 Vendor Sign & Stamp For Bharat Petroleum Corporation Ltd.