WBPHED/EE/AMD/ NIeT-04of 2025-2026/2

Amount

LT MCC PANEL INSTALLATION PORTION:-

Supply of 3½ Core X 150 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable as per IS:7098(Part-I).(From WBSEDCL End to SFU)(Make:-Approved Make)

Supply of 400 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc, spacious sheet steel enclosure, separate cable gland box not required, terminal shrouds on both sides and phase barriers included, conforms to IEC 60947-3, IS/IEC 60947-3, suitable for DIN fuse-link, door interlock & padlock facility incl. S & F 3 nos. DIN type HRC fuse-400 Amps rating.(Make-L & T, FN 400 TPN, Cat No-SK90491+Fuse Unit Cat No-SF94335/ Other approved make)(In Pump House)

Supply of 400 Amp, 4 Way, Busbar made of ETP Grade Copper, in a sheet steel enclosure suitable for 415 VAC, 50 Hz.(Make-Havells, Item Code-IHBC040004)

Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt PDB cum MCC Panel having required Feeders.(5 Nos 20 HP SDS with Incomer)

Earthing & lightning protection arrangement for Pump house, Chlorine room and electrical installation as per ISS and IE rules.(Earth Pit 4 Nos+2 Nos Horn Gap L/A)

Installation and testing, commissioning of the newly supplied LT PDB Cum MCC panel in place of floor including Concrete cutting, dressing, and new base making with placing of chequered plate with suitable MS angles (preferable angle size 50mm X 50 mm X 6mm) socketing, jointing of the cables with supplying necessary jointing kit, including Connecting the equipments body to earth Busbar incl. S & F 50mm X 6 mm Galvanized (Hot Dip) MS flat on wall maintaining gap by using porcelin insulator, this cost included with fitting, fixing of SFU, Bus bar also laying of cable by Saddling as required, and doing connection to equipments with including drilling holes,bolts,nuts washer etc. as per direction of EIC.

Low Lift Pump Withdrawing & Lowering Portion:-

Withdrawing of submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.( For 20 HP S/M P/M)

Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc.all complete as per direction of EIC.(For Newly Sunk RBTW No-06)

Laying of 3 Core X 16 Sqmm Al. Ar. Cable along the length of G.I. collecting line including fixing with supplied clamps, nuts and bolts at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(Damaged RBTW To Newly Sunk RBTW)(Cable Supplied Departmentally)

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC).3 Core X 16 Sqmm cable.

Making straight through joint of 3 core 16 mm² Al Ar cable with 3 Core x 6 Sqmm submersible flat cable by supplying Ferrul, rubber and other necessary materials to make the joint leak proof.(Without kit)

Add GST @ 18%

Add CESS @ 1%

SUNRISE ENGINEERING CORPORATION (BID ID -6360160)

M/s. SOMA ENTERPRISE (BID ID -6360110)