REPAIR AND MAINTENANCE TO B/R WORKS OF SPORTS FACILITIES AND INFRASTRUCTURE AT HQ CIF (K) UNDER AGE (I) CIF (K).

Amount

Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and as directed by Engineer-in-Charge.

M&L for preperation of old painted surfaces after complete removal of existing treatment and applying two coat oil bound distemper over a chalk whiting complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new plasted surfaces of walls, applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed by the Engineer -in -Charge.

Dismantaling boarding/false ceiling of any description fixed in any postion with nails, complete all as specified and as directed by the Engineer-in-Charge. .

GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including 4mm thick non asbestos fibre cement building boards fiuxed or laid/inserted to timber/GI frame work complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling supplied & fixed with nails in any situation, Planed one side and edges tongued and grooved or rebated, fixed in any situation over 12mm thick plyboard runner including french polishing on exposed surface of any description including cleaning and preparing the surface a coat of wooden filler upto satisfaction of the Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old painted wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in -Charge.

Preparation of old painted steel or steel based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in -Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.

Vetrified Ceramic tiles (Dark Shade/double charged/ultera charge) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exceeding 0.42 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Vetrified Ceramic tiles (Dark Shade/double charged/ultera charge) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured, laid over and including 10mm thick cement plaster in cement mortar 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete all as specified and as directed by the Engineer-in-Charge.

M&L cement concrete type D-2, 1:4:8, using 40mm graded crushed stone aggregate,as in leveling coarse of flooring, complete all as specified and as directed by the Engineer-in-Charge.

Plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, as in leveling coarse of flooring, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of boarding as in partition wall, screen wall of any description fixed in any position with nails complete all as specified and as directed by Engineer-in-Charge.

Anodised aluminium (powder coated minimum thickness of powder coating 50 micron)window and ventilator shutters,partition wall fixed type powder coated of any colour sliding/ hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.), complete all as specified and directed by the Engineer-in-Charge.

Tinted sheet glass, 4 mm thick glazing with in alm frames including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings as required, complete all as specified and as directed by the Engineer-in-Charge.

Note :- An amount of Rs.26,760.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SHIMAR STAR GLACIER (BID ID -3159764)