Construction of mediation centre at Narjoe ling Chuchot

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying stabilized mud block wall having two leaves interlocked with tiles at 900 mm Horizontally and 450 mm vertically , leaving air cavity of 3" between two wall leaves .

Dumping of stone Including cost of stone.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size)

Providing & laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hings of required size with necessary screws , excluding panelling which will be paid for separately , all complete as per direction. First class kail wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing of traditional Ladakhi double sided Shingstag of height 2 feet in 2nd class kail wood as per drawing complete in all respects (including polishing , cement concrete coping , fasteners which to be separately ) including cost off transportation , labour ,wood wastage , taxes , profits etc as per direction of Engineer -in -charge

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 40mm thick with 20 mm nominal size stone aggregate

Prelaminated flooring (Engineer wood flooring ) 12 mm thick top layer with foam base layer 4mm thick over cement concrete flooring 40 mm thick .

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of1st quality conforming to IS : 15622, of approved make, laid on 20 mmthick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

12 mm Cement plaster 1:2 (1 Cement : 2 Sand )

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

15 mm cement lime plaster on rough side of single or half brick wall of mix 1 :6 (1 cement : 1 lime putty :6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Providing and fixing ISI marked oxidized M.S sliding door bolts with nuts and screws etc,complete 300x16mm

Providing and fixing ISI marked oxidized M.S tower bolt black finish , (Barrel type) with necessary screws etc complete.200x10mm

Providing and fixing ISI marked oxidized M.S tower bolt black finish , (Barrel type) with necessary screws etc complete.100x10mm

Providing and fixing ISI marked oxidized M.S handles conforming to IS : 4992 with necessary screws etc, complete

Providing and fixing 3 layer PP -R (Poly propylene Random copolymer ) pipes conforming to IS : 15801 , UV stabilized and anti-microbial fusion welded , having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypopylene random fittings .This includes testing of joints complete as per direction of Engineer - charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc

Providing and fixing 3 layer PP -R (Poly propylene Random copolymer ) pipes conforming to IS : 15801 , UV stabilized and anti-microbial fusion welded , having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypopylene random fittings .This includes testing of joints complete as per direction of Engineer - charge.Internal work exposed on wall with clamps at 1.00 mtr spacing.

Providing and fixing white viterous china pedestal type water closet (European type) with seat and lid, 10 litre low level C.P flush with fittings CI/ MS bracket 40 mm bend diameter flush bend overflow arrangement with mosquito type coupling complete incl painting of fittings and brackets, cutting and making good the wall and floors wherever required WC pan with ISI marked white solid plastic seat and lid, with white viterous China flushing cistern & CP flush bend.

Providing and fixing wash basin with CI MS bracket, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern incl paintings of fittings and brackets cutting and making good the walls wherever required white viterous China wash basin size 600x480 mm with single 15 mm CP brass pillars taps. Kitchen sink with drain board size 510x1040 bowl depth 178 mm

Kitchen sink with drain board size 510x1040 bowl depth 178 mm

Providing and fixing mirror of superior glass (of approved quality ) and of req shape and size with plastic moduleframe of approved make and shade with 6 mm thick hard board backing .Rectangular shape 1500x450 mm

Providing and fixing CP brass single lever telephone wall mixer of quality & make as approved by engineer -in -charge

Providing and fixing plain bend of req degree 100mm

75 mm diameter

Providing and fixing plain bend and various fixtures of req degree 100 mm

75 mm diameter

Providing and fixing PVC waste pipe for sink or wash basin incl PVC waste fittings comp[lete Flexible pipe 32 mm dia

Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS :8931

Providing and fixing 15 mm nominal bore C.P stop cock (concealed ) of standard design and approved make conforming to IS :8931

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 19.16.1 100 mm diameter

Providing and fixing gyser of req capacity incl fixing with all fixture complete job.25 ltr

Providing and placing on terrace polyethene water storage tank ISI : 1270 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Polyurethane 50 mm thick of density 28 kg -38 kg / CU M in between cavity wall

Dry random rubble masonry with hard stone in foundation and plinth With bond stone

Carriage of material by mechanical trasport Cement & Steel an avg lead 15 Km

Sand an avg lead 10 km

Stone Agg an avg lead 5 km

Stone an avg lead 20 km

M/S SONAM NAMGIAL

M/S RIGZIN ANGCHOK

M/S GURMET TUNDUP GOVT CONTRACTOR

M/S MEHDI ALI GOVT CONTRACTOR

R.B.CHOPRA FREIGHTERS PVT. LTD.

M/S ABDUL HAKIM

M/S MASOOD AHMAD GOVT CONTRACTOR

M/S TASLIM AHMED

M/S RIGZEN WANGTAK