COMPREHENSIVE MAINTENANCE WORK TO OTM ACCN AT DRONACHAL BASE AND TOP UNDER GE DRONACHAL

Amount

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of White Wash complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) complete all as specified and as directed.

M&L for prepration of old ceiling surfaces, applying two coat of white wash on ceiling complete all as specified and as directed.

M & L Preparation of old plastered surface wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material and labour for brickwork with Fly Ash Bricks, straight or curved on plan exceeding 6 meter mean radius built in cement sand mortar 1:6 including demolition & removing dubrish outside MD land complete all as specified and as directed .

Dismantling boarding, any description, fixed in any position with nails/Screws or any adhesives and Supply and Fix in Repair including Dismantling, Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all including the necessary PVC Frame complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs blankets, any thickness, including cover fillets and Supply and Fix Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed for following capacity including writing with oil paint the date of cleaning on tank ;

Exc 250 Ltrs but not exc 500 Ltrs

Exc 500 Ltrs but not exc 1000 Ltrs

RCC Water Tank of Capacity Exc 1000 Ltr (RCC Tank Situated on Roof)

Supply and Fix in Repair Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete all as specified and as directed.

Supply and Fix in Repair Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete all as specified and as directed.

Supply and Fix in Repair Rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete all as specified and as directed.

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base of floor, path etc,complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design laid over 50mm thick sand cushion and filling of joints with Narmada fine sand complete all as specified and as directed.

M&L for Chequered cement concrete tiles cast in rubber mould, glossy finish of approved colour, general purpose, double layer, size 25cm x 25cm x 22mm thick, with mixture of white and grey cement in equal proportions and pigments, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and as directed.

Demolition of stone slab and tiling of any description or thickness laid, bedded and pointed in any mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed

Material and labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified and as directed.

Material and labour for glazed ceramic tiles coloured of size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 32 but in skirting, vertical surface dadoes and riser etc. over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 64 but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material & labour for 20mm thick granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Supply and fixing in repair light coloured vitreous china wash hand basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified and as directed.

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and as directed.

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete all as specified and as directed.

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and as directed.

Supply and fixingin repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing nuts for iron pipe of 15mm bore fancy type complete all as specified and as directed.

Supply and fixing in repairs of fancy type chromium plated Bib tap, 15mm bore complete all as specified and as directed.

Supply and fixing in repair of CP brass fancy type stop cock with long shank & as concealed type/ angular type complete all as specified and as directed.

S&F in repair two way bib tap 15mm dia complete all as specified and as directed.

S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink complete all as specified and directed.

Supply and fix in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed.

Taking up or down PVC/GI tubing of 15/20mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

Supply and fixing in repair 20mm dia CPVC pipe of grade SDR - 11 and and plain fittings of SDR-11 on wall or ceiling or laying in floor /ceiling concealed type including all type of fittings complete all as specified and as directed.

Supply and fixing in repair 25mm dia CPVC pipe of grade SDR - 11 and and plain fittings of SDR-11 on wall or ceiling or laying in floor /ceiling concealed type including all type of fittings complete all as specified and as directed.

M &L cutting channels grooves or rebates n.exc 15cm girth and trimming surface complete all as specified and as directed.

S&F for PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls including repair and replacement old pipe complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor including repair and replacement old pipe complete all as specified and as directed.

S&F for PVC (SWR) bends of 110 mm bore and any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend in any radius complete all as specified and as directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as including in repair complete all as specified and directed.

Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed

Supply and fixing for figured glass, 4.8mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Material and labour for Securing glass of any description in existing Metal/wooden frames glazed with putty/ beads/securing pins including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fixing in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply and fixing in repair heavy duty hydraulic floor door spring fixed to floor for heavy toughend glass door including top ss bracket with pivot for fixing of glass with glass partition including all taking down and refixing of heavy glass any type complete all as specified and as directed.

Supply and fixing in repair double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.

Supply and fixing in repair for 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and as directed.

Material & labour in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails complete all as specified and as directed.

Supply and fixing in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed

Extra over rate for item No 68 above for prelaminated partical board for external teak wood lipping 6mm thick fixed with nails complete all as specified and as directed.

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed.

All as per Srl item No. 71 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 2 sqm each complete all as specified and as directed.

Material and labour for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc. complete all as specified and as directed.

Supply and fixing Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.

Supply and fixing 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and as directed.

Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 complete all as specified and as directed.

Material and labour for anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Note minimum thickness of powder coating 50 micron complete all as specified and as directed.

Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron complete all as specified and as directed.

Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed.

Supply and fixing 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Supply and fixing 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and as directed.

Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Material and labour for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Mild steel, plain, black sheet 1.25mm in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes unched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

Dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete all as specified and as directed.

M&L for Fibre glass reinforced translucent corrugated sheeting (approved color and pattern) with two corrugations side lap fixed with coach screw and washer in roof, wall etc incl L type or J-type hook instead of screw complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Petty repairs to servicable sensor & fancy plumbing fittings by authorised agent including providing & replacing genuin company manufactured spare parts if required at site complete all as specified and as directed.

Fixing only in repairs existing sliding door bolt / tower bolt / handle / floor door stopper / helical door spring / hinges / hasp & staple, wooden pelmet boxes / drapery Rods of any size & material at any location complete all as specified and as directed.

Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection,, float valves, concealed stop cock, GI pipe joints bottle traps, PVC water tank, low level flushing cistern , CPVC/GI pipe fittings incl providing & replacing of good quality rubber washer check nuts plunges ,taflon tape, M-seal, brass spindles (specific type), GI/ brass/CPVC fittings/ white cement/ silicon sealant etc or any other minor accessories / repairs to make the system all time functional , ensure smooth water supply without any wastage and stop water leakage including Mortar pressure to pipe line complete all as specified and directed.

Fixing with running welding in repair of Steel Windows, by Welding or by Bolts of adequate strength, Cutting of Windows whereever required for AC Duct Opening Etc, Inclding Weldin if Required on Window Ventilator Etc, Including all the necessary Accessories for Window Fixing, Window and Ventilator of any type, Any Size and thickness, complete all as specified and as directed.

Removing and Refixing in Same Opening by Repairing the Aluminium Doors and Windows, of any Type and any Size, Sliding or Openable, After Repairing, any Loose Fitting Sections, Including Screws, Bolts Rubber Clips, and other Similar articles, Making Good before refixing, Cleaning the Parts causing malfucntioning of Doors, Windows, by repairing the Jambs and Cills of Window/Doors if Required, All Including Material and Labour complete all as specified and as directed.

Removal and Refixing in same opening or any other opening, of any Shape and any Size 12 mm (or any other thickness) thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long and other connecting items necessary for proper functioning of door/ Opening complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including fittings (such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc.

Taking down old DBs including existing MCCBs,MCB TPN and connected items of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed

One light/fan point controlled by one way switch ( switch to be measured and paid separtely)

One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 2.5 Sqmm cable as earth wire connected to common earth and to earth dully (socket & switches to be measured and paid separately).

All as above item No 112.02 but Same board.

All as above item No 112.02 but copper conductor 2.5 sqmm for 15 amp socket outlet.

One light point controlled by 2 two way switch with 1.5 Sqmm copper wire.

M & L for power point with insulated stranded copper conductor cable 4 Sqmm single core two run and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to earth dolly complete all as specified and directed. (socket and switches to be measured and paid separately)

S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(AC Box) complete all as specified and directed.

S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed.

S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed.

S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed.

S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed.

S & F of modular switch socket combination 16A (with gang box where is required), 6 pin, 3 module, ISI marked complete all as specified and directed.

S & F in repair of modular bell push 6A, 1 module ISI marked complete all as specified and directed.

S & F in repair of White cover plate with frame, 3 module ISI marked complete all as directed.

S & F in repair of White cover plate with frame, 6 module ISI marked complete all as directed.

S & F in repair of White cover plate with frame, 12 module ISI marked complete all as directed.

S & F in repair of multi music call bell ISI marked complete all as specified and directed.

S & F in repair of call bell Ding Dong ISI marked complete all as specified and directed.

S & F in repair of bell push flush type SP 5 Amp complete all as specified and directed.

S & F in repair of switch piano type flush type single pole one way 5 Amps, ISI marked complete all as specified and directed.

S & F in repair of socket outlet 5 pin flush 6 Amp multi pin 2/3 pin complete all as specified and directed.

S & F in repair of switch socket combined outlet 6 pin flush 16 Amp multi, ISI marked complete all as specified and directed.

S & F in repair of switch piano type/flush button type single pole two way 5 Amps front operated ISI marked complete all as specified and directed.

S & F in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F in repair of 3 pin plug top AC-230V, 6 Amp complete all as specified and directed.

S & F in repair of 3 pin plug top AC-230V, 16 Amp complete all as specified and directed.

S&F in repair ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and directed.

S & F in repair of High lam sheet cover ISI marked with required Nos of space for switches/Sockets/Regulator of size 250x280mm complete all as specified and directed.

S & F in repair incl taking down LED bulb 9 Watt with very high efficiency suited for installation in existing lamp holders, complete all as specified and directed.

M & L Submain wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as specified and directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as specified and directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Material & Labour for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn through PVC casing capping of required size complete all as specified and directed. Note: Three runs of 4 sqmm cable and one run of PVC casing capping shall be measured as one RM.

Material & Labour for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn through PVC casing capping of required size complete all as specified and directed. Note: Three runs of 2.5 sqmm cable and one run of PVC casing capping shall be measured as one RM.

S & F in repair LED batten luminaire surface mounted ,4 feet system wattage 20 Watts with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection 2.5KV , IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free and including connecting up with PVC sheathed suitable sizecopper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed.

S & F LED batten luminaire surface mounted 2 feet system wattage 10 watts and not less than 1200 lm with life time of 50000 burning hours with . CRI > 80, power factor > 0.95, THD < 10%, color temperature - 6000 to 6500 K , surge protection 2.5 KV , IP- 20 protected meets LED IS specifications, Class - 1, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt, filcker free and including connecting up with PVC sheathed suitable size copper conductor flexible wire fixed with 5 years of replacement warranty on fittings complete all as specified and directed.

S&F 30W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) 150 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCB's as outgoings complete all as specified and directed.

M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed.

M&L distribution board SPN 8 way with 200 Amp rated bus bar double door, IP 43 protection complete all as specified and directed.

M&L distribution board SPN 12 way with 200 Amp rated bus bar double door, IP 43 protection complete all as specified and directed.

S & F in repair amp rating 240V 10 KA'B' curve MCB SPN 32-40 A current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed.

S & F in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as specified and directed.

S & F in repair amp rating 240V 10 KA'B' curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed.

S & F in repair 100 A MCCB 4 pole, 16 kA breaking capacity, 415 V (Ics=100% Icu ) with suitable thimbles complete all as specified and directed.

S & F in repair 63 A MCCB 4 pole, 16 kA breaking capacity, 415 V (Ics=100% Icu ) with suitable thimbles complete all as specified and directed.

S & F in replacement Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed.

S&F in replacement of new genration post top lanterns, IP-65 elegantly designed spun alumnium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing, environmental friendly long life high power LED light 25 watt complete all as specified and directed.

S & F in repair incl taking down of 15 W LED Recess mounted downlighter (squrae/round shape) with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as specified and directed.

Taking down stage lights from the height of 40 ft, Replacement & refixing of Halogen bulb, LED bulb, LED Driver etc including all connected items , complete all as specified and directed. Note:- (a) Contractor to make own arrangement of ladder and all required equipment for taking down and fixing. (b) Items required for repair/maint will be measured and paid separately.

Supply and fix LED driver for stage light (as reqd at site)

Supply and fix Halogen bulb (as reqd at site)

Supply and fix LED plate (as reqd at site)

Labour charge for taking down and refixing of LED plate & stage lights upto height 40 feet per light

Commissioning charges (Programming of stage lighting system with dimmer control ) per LED driver

SHIV SHANKAR MISHRA (BID ID -3467951)