Providing /Fixing the Fancy decorating lights in the 8 No. of Paths situated in Sector 4 and 5, Karnal under District Plan 2025-26. (Recall)

Supply and erection of Digital Time switch with current carring capacity upto 16A and capable for the range for 110-240 VAC, make should be as equivalent grade of havells, LandT, INDO-ASIAN, SIEMENS,HPL etc Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects .

Supply and erection of power Contactor (40 Amp.) with low VA burdon coil completely shield for dusty atmosphere should be capable for 16A to 60A range. Make should be as equivalent grade of havells, LandT, INDO-ASIAN, SIEMENS, HPL etc Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects .

Supply of Aluminium cable make should be as equivalent grade as capable for 650/1100V, XLPE Insulated, cores laid up, PVC tape, inner sheathed for Multicore Cables Make:- Grandly, RR Kabel, Plaza Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects 10 Sq. mm 4 Core Cable, (arm) specification as per make Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects

Supply of Decorative GI Flox pole total height of the pole is 3mtr, Lower part of the pole having 114mm Dia, and height is 1000mm. Upper part of the pole having 60mm Dia and height is 2000mm. Decorative casting part are PU panted in three layers coating in which Ist layer with ETCH primer, 2nd layer with EPOXY primer and 3rd final layer with PU Paint, base plate having 340mm Dia x10mm thick, oval shape service window at lower part of pole having loop in loop. out 4-way connector 40 amp suitable for 10Sq mm wire with 6-amp single pole MCB. and Supply of Decorative post top Fixture Mini Allegro having 405mm width and height of fixture is 313mm with 40w led, which is suitable for 60mm mounting, Fitting made with corrosion resistant Dia cast aluminum, rubber gaskets are also provided for dust and water protection Polycarbonates (PC) diffuser is used. Polycarbonates (PC) dual diffuser it used for anty gearing and evenness of light distribution. LED should be mounted on MC PCB Decorative casting parts are PU panted in three layers coating in which Ist layer with ETCH primer, 2nd layer with EPOXY primer and 3rdfinal layer with PU Paint 10kv SPD to be used.complete in all respect. (Make: VAK Light Glowmac, Havells, Crompton, Jaquar Light, Twinkle as per list approved by DULB/PWD Department etc.)

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate]

[23.22.5.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.7. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCBs FOUR POLE [Through Rate]

[23.27.1]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 1. M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1:2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level. 0 0 [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.2.5.1]LT CABLE 5.1. Laying and fixing of cable on surface/ cable tray etc as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core [Through Rate]

[24.2.8.3]LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm [Through Rate]

[24.5.2.2]MISCELLANEOUS ITEMS 2.2. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dia/ inner dia [Through Rate]