TMD/MIN-1057

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil A) All kinds of soil.

Return earth filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming (allow for breading up lumes, shrinkage etc) watering lead upto 50 metre and lift up to 1.5m complete as directed by the E.I.C

Providing and laying plain cement concrete 1 : 3 : 6 (1 Cement : 3Coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and laying reinforced cement concrete work in walls (any thickness) including attachedpilasters ,buttresses plinth and string courses, fillets columns , piers, aboutments,posts and struts etc.Up to floor five level excluding cost of centering, shuttring, finishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3Graded stone aggregate 20mm nominal size.)

centering shuttering including removal of form work for all types of work. for providing and fixing straight shuttering a) Foundation, footings, bases of columns etc.

Reinforcement for R.C.C. Work including straighteningm, cutting,bending placing in position and binding all complete.(Hot rolled deformed base)

Brick work with F.P.S brick of class designation 75 in superstructur and plinth in cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and fixing precoated colour iron profile sheets make TATA Blue scope (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness a) corrugated sheet up to 60 pitch with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Up to a height of 15m

Providing fixing ridge with colour coted sheet Ridges plain (500 - 600 mm)

Structural steel welded section.

plaster of thickness 15 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Neat cement punning

Supplying and applying two (2) coats of white wash over old work at various elevations including preparation of surfaces, cleaning etc. complete with all materials, labour, tools and tackle etc., scaffolding work as per specifications and directions of Engineer-in-charge COMPOSITION i) Water @ 5 litres per Kg of lime for making cream. ii) Fevicol DDl @ 4 gm. Per litre of lime cream. iii) Robin Blue @ 2gm. Per Kg lime.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on old work as per the direction of EIC.

Ramlal Singh and Sons

M/S SOLOCHANA ENTERPRISES

M/S R K ENTERPRISES

BABA LOKNATH CONSTRUCTION

SAKTI CONSTRUCTION