WELCOME MAINT CERTAIN PERIODICAL SERVICES AND REPAIRS TO SUNKEN FLOORS JOINERY CEILING PLUMBING ROOFING TILING ETC AT TRISHUL LINES AND MES COLONY UNDER AGE B R N NO II OF GE NORTH SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

S & F for glazed and gauged steel window (double shutter glazed & galvanized) of double shutter made with galvanized steel colour coated/powder coated (Base steel as per IS 513 'D' galvanized as per 277 with zinc of 120 grams/square metre with total coating thickness of 0.60mm, sections for frame should be 72mmx55mm section for mullian should be 72mm x50mm , section for shutter frame should be 47mmx20mm and section for fixing glass bead of PVC should be 12mm x 12mm section for fly proof mesh shutter frame should be 40mm x20mm and stainless steel wire mesh of 0.36mm dia and average width of aperture shall be of 1.4mm fixed with beading size 18x0.6mm GI powder coated flat shall be used for fly proofing shutters and 4mm thick plain sheet glass to be used for glazing of glazed shutters complete all as specified and as directed.

Supply and fixing factory made UPVC white colour fixed glazed window/ ventilator made of (small series) frame 47x50 mm mullion 47x68 mm both having wall thickness of 1.9+ 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile UPVC extruded glazing beads of appropriate dimension, EPDM gasket , G.I. fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass shall be paid separately). Note : For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e., in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in bed plates, kerbs, copings, filling of hollow portion of MS frames etc., including necessary form work complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 as in walls etc., including demolition of brick work built in cement mortar complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in CM 1:6 and finished fair and even and smooth without using extra cement in narrow widths complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of walls including preparation of surface complete all as specified and as directed.

S&F solid PVC Door Frame of size 50 X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, S&F in opening as per manufacturer's instructions complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturer's instructions complete all as specified and as directed.

S&F 35mm thick, 2nd class hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauge, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S&F 25mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

M&L for applying two coats of synthetic enameled paint over steel and iron surfaces of any description, not otherwise described over 10 cm width or girth including preparation of new surfaces and one coat of red oxide primer complete all as specified and as directed.

S&F framed work such as grills framed guard bars etc., with end of bars shouldered riveted or angle into spikes framed guard bars and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

S&F 300mm long mild steel sliding door bolt, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts four on bolt plate and two on stapple plate etc., complete all as specified and as directed.

S&F 200mm long MS barrel tower bolt, stove enamelled black with bright bolts complete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 150mm long MS pressed handles oval type stove enamelled black complete all as specified and as directed.

S&F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S & F stainless steel butt hinges 100mm long with stainless steel hinge pin complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

M&L for preparing the old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

All as per item No 33 but as on ceilings complete all as specified and as directed.

M&L for preparing old decorative surfaces of walls and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparing old distemper surfaces on walls by washing rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed.

Demolition of concrete of any description and in any position in sunken floors etc., complete all as specified and as directed.

M & L for application of one coat of water based bitumen emulsion primer @ 0.3 lit per Sqm including cleaning of surface thoroughly from dust & dirt. Lay water proofing treatment with polymetric membrane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on membrane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of membrane and providing 25 mm thick sand cushioning to receive lean concrete in sunken floor complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down existing plaster and mixing of water proofing compound, finished even and fair complete all as specified and as directed. NOTE: Water proofing compound shall be measured and paid separately.

M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 12.5 mm graded stone aggregate of average 25 mm thick make to slope in sunken floors complete all as specified and as directed.

S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc., complete all as specified and as directed.

M & L for 20mm to 25mm thick machine cut polished Cuddapah stone slabs in cooking platform, shelfs etc., laid over 15 mm thick cm (1.4) screed including jointed and pointed in grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M & L for 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down etc., steel tubing and connections complete all as specified and as directed.

M & L for 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down old steel tubing and connections complete all as specified and as directed.

M & L for 40mm thick plain cement concrete 1:2:4, Type B1 (using 20mm graded stone aggregate) as in floors and finished even and smooth with using extra cement complete all as specified and as directed.

Demolition and bracking up drain pipes (salt glazed ware AC or Reinforced concrete) set in cement mortar 100mm dia complete all as specified and as directed.

All as per item No. 48 above but 75mm bore complete all as specified and as directed.

S & F RCC Class NP 2, 100 mm bore pipes laid and jointed complete with collars complete all as specified and as directed.

S & F RCC Class NP 2, 80 mm bore pipes laid and jointed complete with collars complete all as specified and as directed.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

M & L for screed bed 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:4 on brick on concrete surface as backing coat of tiles complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 300x300x7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.6 Sqm but not exceeding11 Sqm in floors etc., set and jointed in near cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M & L for coloured glazed ceramic tiles 300x200x7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

Taking out existing unserviceable water closet, squatting pan of any size and supply & fix vitreous China squatting pan ‘Orissa’ pattern, size 580 X 440 mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, PCC 1:3:6 type C2 bedding etc, complete including making good to floor to match with adjoining surfaces complete all as specified and as directed.

Taking out existing unserviceable water closet, pedestal pattern of any size and supply & fix vitreous China wash down water closed pan (pedestal Pattern) white including fixing bolts, including making good to floor to match with adjoining surfaces complete all as specified and as directed.

S & F 10 ltrs capacity PVC valveless flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, including flush pipe of PVC 32 mm dia for low level cistern, including taking down of existing old one complete all as specified and as directed.

S & F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) bends any radius 75mm bore provided with access door complete all as specified and as directed.

All same as per item No. 61 above but 110mm bore complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F UPVC/PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls laid in/floor, 75mm bore complete all as specified and as directed.

S & F UPVC/PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls/ laid in floor, 100mm bore complete all as specified and as directed.

S&F 15mm dia Bib tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.

S&F for pillars tap of PTMT any colour in screwed for iron pipe and fixed 15 mm dia fixed in repairs (Min weight 110 gms) complete all as specified and as directed.

S&F for Stop valve of PTMT 15mm bore any colour in screwed for iron pipe and fixed in repairs complete all as specified and as directed.

S & F in repairs plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

M&L for two coats of distemper over chalk whitening including 3 mm wall care putty on walls complete removal of existing treatment on wall surfaces complete all as specified and as directed.

M&L for preparing old decorated surfaces of walls/bands /slabs and applying one coat of weather proof paint of any colour complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for rendering 5 mm thick on ceilings in CM (1:4) and finishing surface even and smooth without using cement etc in patches, area not exceeding 3 Sqm in each patch complete all as specified and as directed.

M&L for preparing new plastered or unplastered ceiling surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.

S& F 150 mm long Hasp & stapple mild steel stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of old water tank of any description complete all as specified and as directed.

S&F in repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms/ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

S&F in repairs 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/ 40mm - 690 gms)

S&F PVC flush pipe (low level band) 32 mm dia for low level flush tank (High density) of standard make suitable for EWC fixed in repairs complete all as specified and as directed.

M & L for 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and as directed.

Dismantling of AC corrugated as semi corrugated sheet in roof coverings complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated /trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in ridges fixed with self tapping screws, complete all as specified and as directed.

S&F sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and as directed.

M&L for vitreous china wash hand basin, white, flat back size 550x 400 mm fixed in repairs including waste pipe, (hope of bore 32mm) waste coupling brackets, etc., complete all as specified and as directed.

M & L for Low density waste pipe 40 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 90 cm long suitable steel sink waste complete fixed in repairs complete all as specified and as directed.

M&L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete fixed in repairs complete all as specified and as directed.

M & L for Low density waste pipe 40 mm dia for working pressure rating 6 Kg/Sqcm including necessasary fittings complete fixed in repairs complete all as specified and as directed.

S&F 100 mm waste coupling for sinks of any pattern fixed in repairs complete all as specified and as directed.

S&F 15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed in repairs complete all as specified and as directed.

S&F Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions in repairs complete all as specified and as directed.

S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions in repairs complete all as specified and as directed.

S&F Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions in repairs complete all as specified and as directed.

S&F Pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe in repairs complete all as specified and as directed.

S&F Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe in repairs complete all as specified and as directed.

S&F Bib taps cast copper alloy with crutch handle, screwed down and screwed for 15 mm bore iron pipe fixed in repairs complete all as specified and as directed.

M & L for Brass chromium plated, angle cock, screwed of 15 mm bore iron pipe fixed in repairs complete all as specified and as directed.

M & L for 125 mm dia brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed.

S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-W complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Taking down loose material by chiseling, chipping from beam, slabs chajja etc., cleaning the surfaces and guiniting in CM 1:3, 25mm thick including use and waste form work and providing welded wire mesh size 100 x 100 mm of wire 3, finishing the guiniting surfaces in cement mortar 1:3, 10mm with water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately.

Supply only water proofing compound complete all as specified and as directed.

M/s GM Constructions

abhilasha constructions

M/S C MALLIAH & SONS

VACON INFRASTRUCTURES

Pragathi Infrastructure Co.

Maruti Construction Co.

M/S DIVIJA BUILDERS

BHEEMRAO PATIL CONTRACTOR

SKY CONSTRUCTIONS