Setting up of ladies Toilet Facility on the first floor of Animal House building at ACTREC

Amount

Taking out existing wooden door shutters with existing door frame, repairing by cutting, painting, etc., and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc., as required, all complete as per the direction of the Engineer-in-charge.

Making the opening in brick masonry, including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring, and jambs complete, to match the existing surface, including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.: For door/ window/ clerestory window.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross-sectional area of R.C.C. or R.B. work) as per direction of the Engineer-in-charge.

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).: From ground level upto plinth level.

WATER PROOF PLASTER: Providing and laying waterproof cement plaster 20mm in two coat backing coats of 12mm thick in CM 1:3 and a second coat of 8mm thick in CM 1:3 finish, including supplying and adding the waterproofing compound weight of cement at all floor levels for repair to chambers, manholes, water retaining structures, depressions in bath/WCS, etc. in quantities as required at the site including scaffolding, curing layer will be allowed to air cure for 4hours followed with water curing for 48 hours, hacking of concrete surface, etc. complete all as directed by engineer-in charge (to maintain bone dry condition underneath for 10 yrs) The rate includes preparation of surface, treatment, and sealing of all joints, corners, junctions of pipe sand masonry with polymer mixed slurry. (Rates also include disposing/taking away the debris outside the premises of ACTREC and disposing as per the statutory guidelines)

Providing and laying waterproofing treatment in sunken portion of WCs, bathrooms, etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying: (a) First layer of a slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours, followed by water curing for 48 hours.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

BRICK BAT COBA: Providing water proof brick bat coba for filling in the depressions and sunken portions in toilet bathrooms W.C. drying area etc. at all floors and locations as per the specifications of specialized water proofing agencies and finishing the top surfaces even using c.m. 1:3 and approved water proofing compound 2% cement weight etc. complete all as directed by the Engineer-in-Charge. Note: The measurements shall be on cubic Meter basis. No. deductions shall be made for the areas occupied by W.C. Pans and other fittings and fixtures. (disposing/taking away the debris outside te premises & disposing as per the instruction of EIC or Any statutory authority)

For thickness of tiles above 25 mm and up to 40 mm

Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.: Size of Tile 600x600 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 20 mm nominal dia Pipes.

P.V.C. PIPES: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme, etc., make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.: 50mm

P.V.C. PIPES: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme, etc., make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.: 75mm

P.V.C. PIPES: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme, etc., make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.: 110mm

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water-tight C.I. cover with a frame of 300 x 300 mm size (inside), the weight of the cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.

White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893.: 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15 mm nominal bore.

Providing and fixing brass bib two way cock of approved quality: 20 mm nominal bore.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

TOWEL ROD: Providing & fixing approved C.P. brass towel rods of size 600mm x 20mm heavy duty with a pair of C.P. brass brackets wall flanges etc., fixed to the wall with C.P. screwed on the raw plugs etc., complete as and when required and as directed by the Engineer-In-Charge. work includes removing old fixtures also.: 600mm long towel rod.

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.: Two coats.

Structural steelwork riveted, bolted, or welded in built-up sections, trusses, and framed work, including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer and painting it with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an undercoat of suitable shade with ordinary paint of approved brand and manufacture., all complete.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts, and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 0.63 mm thick with zinc coating not less than 275 gm/m2.

Disposal of building rubbish / malba / similar unserviceable, dismantled, or waste materials by mechanical means, including loading, transporting, and unloading to an approved municipal dumping ground or as approved by the Engineer-in-charge, out of ACTREC premises for all leads, including all lifts involved.