Andaman Nicobar

Financial BO

Works

Civil Works - Others

Repair / Special Repair of Police Head Quarter Building at Atlanta Point Sri Vijaya Puram.

Chief Engineer Andaman Public Works Department (APWD)

Police Head Quarter Sri Vijaya Puram | South Andamans, Andaman And Nicobar Islands

Amount: ₹6.3 LCloses: 20 Aug 2026Closed

Timeline

Published12 Aug 2026
Closed20 Aug 2026
Technical Evaluation27 Aug 2026
Financial Evaluation27 Aug 2026
Award—

Bids

Percentage

2 Bids27 Aug 2026

#	Company	Quoted %	Amount	Rank	Status
1	SSP ENTERPRISES L1₹4.6 LAdmitted-Finance	-27.27%	₹4.6 L	L1	Admitted-Finance
2	P L VALLIAPPAN L2₹5.0 L+₹39,542.58 (8.62%)Admitted-Finance	-21.00%	₹5.0 L+₹39,542.58 (8.62%)	L2	Admitted-Finance

Tender Value

₹6.3 L

EMD Value

₹12,613

Closing Date

20 Aug 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE/SVPSD/APWD/SVP

Address

EE/SVPSD/APWD/SVP

Work Description

Repair / Special Repair of Police Head Quarter Building at Atlanta Point Sri Vijaya Puram.

Tender Information

Tender ID

2026_APWD_24198_1

Reference Number

NIT No.30/EE/SVPSD/2026-27.

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

90 days

Location

Police Head Quarter Sri Vijaya Puram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

Required1. Earnest Money Deposit. (.pdf)

Required2. Certificate of Work Experience. (.pdf)

Required3. Affidavit as per clause 1.2.1 of CPWD 6 shall besubmitted on Indian Non Judicial Bond/Stamp paper (.pdf)

Required4. Certificate of Registration for GST (Good Service Tax). (.pdf)

Required5. 10(Ten)YearsFinancialAuditedstatementofaccountfromaCharteredAccountantasFormAat Page 40/42ofNIT. (.pdf)

Required6. Bidding capacity Form C-3 as per page No.38/40 of NIT. (.pdf)

Required7. Undertaking as per page No. 39/41 of NIT. (.pdf)

Finance

RequiredBOQ-30 (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹12,613

Important Dates

Last Activity

27 Aug 2026

Published

12 Aug 2026

Bid Opening

20 Aug 2026

Download Starts

12 Aug 2026

Download Ends

20 Aug 2026

Submission Starts

12 Aug 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (24 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
1.1	75 mm average thickness	48.18	sqm	533.3	₹25,694.39
1.2	25 mm average thickness	4.6	sqm	178.8	₹822.48
2Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
2.1	Bars above 12 mm diameter	215	metre	23.2	₹4,988
3Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.
3.1	Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make	40	sqm	402.4	₹16,096
4Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
4.1	25 mm average thickness in 2 layers.	4.6	sqm	828.7	₹3,812.02
5Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.37 MB

Work Item Documents

TD-NIT-No-30-of-2026-27.pdf

Tender Documents • 1.12 MB

Instructions-to-bidders.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SSP ENTERPRISES

L1₹4.6 LAdmitted-Finance

P L VALLIAPPAN

L2₹5.0 L+₹39,542.58 (8.62%)Admitted-Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
1.1	75 mm average thickness	48.18	sqm	533.3	₹25,694.39
1.2	25 mm average thickness	4.6	sqm	178.8	₹822.48
2Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
2.1	Bars above 12 mm diameter	215	metre	23.2	₹4,988
3Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.
3.1	Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make	40	sqm	402.4	₹16,096
4Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
4.1	25 mm average thickness in 2 layers.	4.6	sqm	828.7	₹3,812.02
5Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

1.1

75 mm average thickness

48.18

sqm

533.3

₹25,694.39

1.2

25 mm average thickness

4.6

sqm

178.8

₹822.48

2Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

2.1

Bars above 12 mm diameter

215

metre

23.2

₹4,988

3Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.

3.1

Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

sqm

402.4

₹16,096

4Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

4.1

25 mm average thickness in 2 layers.

4.6

sqm

828.7

₹3,812.02

5Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)