Ward 6 construction of harijan chopal

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) (9344.35x0.735x107/107-6868.09)

CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) (357.35x0.735x107/107-262.65)

Providing and laying gang saw cut 18 mm thick miror polished pre moulded and pre polished machine cut ganite stone of required size and shape of approved shad. Colour and texture in footpath flooring cut granite stone of rquired size an shape of approved shade colour and tecture in footpath flooring in road side plazas and similar locations laid over 20mm thick base of cement mortar 1:4 I cement 4 coarse sand including grouting the joints with shite cement mixed with matching pigment epoxy touch ups etc. complete as per direction of engineer in charge Red or equivalent with granite stone of area less than 0.50

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,

Providing corrugated G.S. sheet roofing including vertical/ culved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and GI limpet washer or with G.I. Limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlappping of sheets complete up to any pitch in horizontal/vertical or curved surfaces. excluding the cost of purlins rafters and trusses an including cutting to size and shape wherever required 1.00mm thick with zinc coating not less than.

Cement concrete flooring 1:2:4 (1 cement: 2 finished with a floating coat of neat cement, 10 including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (614.20x0.735x107/107-451.43)

Providing and applying plaster or paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 262.70x0.735x107/107=193.05)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufactures specifications Two or more coats applied on walls@ 1.25ltr/10sqm over and including one coat of special primer applied @0.75ltr/10sqm 193.70x0.735x107/107

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) or approved make. In all colours shades except burgundy bottle green black of any size as approved by Engineer in charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 (I cement 3 Coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matchin shade complete.