Structural Repair, Retrofitting and Renovation of Annex Building at KVIC GRAMODAYA, 3, Irla Road, Navpada, Prem Nagar, Vile Parle West, Mumbai

Name of Work: Structural Repair, Retrofitting & Renovation of Annex Building at KVIC GRAMODAYA, 3, Irla Road,

Navpada, Prem Nagar, Vile Parle (West), Mumbai (Maharashtra)

SUMMARY BOQ AMOUNT

ESTIMATED AMOUNT (Rs.)

S.No. Description DSR Items NS TOTAL incl. GST

Add GST @ 18% charges on NDSR items ₹ - ₹ 13,78,885.60 ₹ 13,78,885.60

(Rupees One Crore Eighty Eight Lakh Fifty One Thousand Nine Hundred Seventy Four Only) incl. GST and all other taxes

Name of Work: Structural Repair, Retrofitting & Renovation of Annex Building at KVIC GRAMODAYA, 3, Irla Road, Navpada, Prem Nagar, Vile

Parle (West), Mumbai (Maharashtra)

BILL OF QUANTITY

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

1 Sub Head:- Dismantling & Demolishing

15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material

within 50 metres lead as per direction of Engineer - in - charge.

3 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cu.m 26.92 2,434.25 - 65,533.05 -

4 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cu.m 5.00 1,503.60 - 7,518.00 -

Demolishing brick work/ coba work by manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead as per

5 direction of Engineer-in-charge.

15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within

50 metres lead.

8 15.23.1 For thickness of tiles 10 mm to 25 mm Sq.m 372.95 73.40 - 27,374.17 -

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

9 disposal of rubbish to the dumping ground within 50 metres lead

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

15.60 mechanical means, including loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including

all lifts involved.

11 Sub Head:- Repairs & New Work to Building

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

13 aggregate 40 mm nominal size derived from natural sources)

6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth up to floor V level in all shapers and size in :

15 Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.m 20.00 9,105.95 1,82,119.00 -

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

8.2 required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss

finish etc. complete at all levels.

17 8.2.2 Granite stone slab of colour black, Cherry/Ruby red

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

19 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Metre 30.80 568.55 17,511.34 -

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of approved make, in all colours, shades except burgundy,

8.31 bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing

with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

21 polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

11.27 (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

25 cement and matching pigments etc., complete.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

27 colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc. complete.

6 mm cement plaster of mix :

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved

brand and manufacturer, over the plastered wall/ceiling surface to prepare the surface even Sq.m 2957.32 156.05 4,61,489.26 -

33 and smooth complete.

Wall/Ceiling painting with acrylic emulsion paint, having VOC (Volatile Organic Compound)

34 content less than 50 grams/ litre, of approved brand and manufacture, including applying

additional coats wherever required, to achieve even shade and colour.

13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound ) content.

With water thinnable cement primer on wall/ceiling surface having VOC content less than 50

37 grams/ litre

13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface

smooth including necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,

14.1 including cutting the patch in proper shape, raking out joints and preparing and plastering the

surface of the walls complete, including disposal of rubbish to the dumping ground, all complete

as per direction of Engineer-in-Charge.

40 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sq.m 140.40 547.40 76,854.96 -

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or

replastering, including disposal of rubbish to the dumping ground, all complete as per direction Sq.m 71.64 72.45 5,190.32 -

41 of Engineer-in-Charge.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the

Engineer-in-Charge.

Providing and laying integral cement based water proofing treatment including preparation of

43 surface as required for treatment of roofs, balconies, terraces etc consisting of following

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC

slab including adjoining walls upto 300 mm height including cleaning the surface before

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating

similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm

46 of cement admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by

47 Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster

and finally finishing the surface with trowel with neat cement slurry and making pattern of

300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two

48 weeks for curing and for final test.“All above operations to be done in order and as directed and

specified by the Engineer-in-Charge :

49 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sq.m 197.59 1,684.60 3,32,853.38 -

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with

resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in

three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid

22.22A (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing

liquid (dry film thickness of complete application/system not less than 500 microns).The

operation shall be carried out after scrapping and properly cleaning the surface to remove

loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-

20mm thick cement plaster in 1:3 finished with floating coat of cement including mixing of

51 NS waterproofing compound as per manufacturer specification, making gola all round at junction Sq.m 278.68 - 606.95 - 1,69,142.40

of parapet wall and extend upto 300mm height on prapet wall

52 Sub Head:-Strengthening Work

53 REMOVING OF DAMAGED CONCRETE

Chipping of 75mm average thick unsound/ weak concrete material from slabs, beams, columns

etc. with manual Chisel and/ or by standard power driven percussion type or of approved make

54 including tapering of all edges, making square shoulders of cavities including cleaning the Sq.m 750.00 378.00 2,83,500.00 -

exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for

all lead and lifts all complete as per direction of Engineer-In-Charge.

55 CORROSION INHIBITOR THROUGH NOZZLE

Corrosion inhibitor through nozzle, Inject migrating corrosion inhibitor in all the nozzles fixed in

grid fashion through all RCC members.

57 INJECTION GROUTING FOR CONCRETE

Epoxy Resin Grout (Non Shrink Free flow low viscosity

solvent free epoxy grouting required) or (High Molecular Thermoset Polymer Grouting.

Providing and injecting low viscosity Solvent free epoxy of MYK Arment ArmGrout inject EP-LV

& equivalent in the ratio of resin and hardener by grouting pump at a pressure @ 3-6 Kg/cm2

58 or as instructed by EIC etc complete. After grouting is completed after 24 hours, cut the

nipples and seal it with polymer-modified mortor of MYK Arment Rearm Fis 10 S &

equivalent as per specifications given above.

Approximate No. of Nozzles. Considering 600 x 600 mm grid at honeycomb area and 150

mm c/c along the crack.(depth of drilling should be 200 mm)

61 MICRO FINE CEMENT GROUT

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and injecting micro fine cement with polymer. In the ratio as per specifications

with grouting pump at a pressure @ 1.5 to 3.5 Kg/cm2 or as instructed by EIC etc

complete. After grouting is completed after 24 hours, cut the nipples and seal it with

polymer-modified mortor as per specifications given above. Approximate No. of Nozzles

Considering 600 x 600 mm grid on RCC members and 150 mm C/C along the crack. The

rate excluding scaffolding/ working platform/safety nets etc. which are required.

65 EXTERNAL CRACKFILLING

Damaged Concrete Cracks

Open the cracks into „V‟ groove using proper mechanical tools. Ensure that the adjoining good

cover is not disturbed and damaged. Clean and moisten the groove. Providing and applying

Epoxy + silica sand 1:2 proportion mortar of MYK Arment Rearm Epoxy USM & equivalent. In

the groove and finish at all heights, level and surface etc. complete. After 24 hours inspected

and if required provide another leveling course over the same. The rate to exclude for erecting

necessary scaffolding, etc. all complete as per the satisfaction of the EIC The rate excluding

scaffolding/ working platform/safety nets etc. which are required.

67 PROVIDING AND FIXING CHEMICAL REBARS

Providing and fixing chemical rebars shear connectors as per drawing and at all heights as per

68 NS EIC. using epoxy grout made with Epoxy resin and silica filler of MYK Arment ArmGrout HF 66

& equivalent (Hilti or Klimas or Wurth)

For Jacketing of R.C.C. members as per specifications. The rate excluding scaffolding/

73 working platform/safety nets etc. which are required.

74 CLEANING OF EXISTING REINFORCEMENT

Cleaning of existing reinforcement with wire brush and applying rust convertor of MYK Arment

Rearm Rust C & equivalent before doing micro concrete repair and polymer repair to damage

concrete of R.C.C. members along with bond coat. The rate excluding scaffolding/ working

platform/safety nets etc. which are required.

76 NEW REINFORCEMENT

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and fixing new reinforcement in position mild / tor steel reinforcement wherever

required The rate to include for cutting, hooking, cranking, placing in position and binding with

18 SWG wire, complete. The rate to also include cost of binding wire, which will not be

measured. The reinforcement welded with existing reinforcement up to lap length as per

existing diameter of reinforcement. The existing bar must be clean as per specification. After

cleaning all the reinforcement should be coated with MYK Arment FloArm Zinc ZP &

equivalent. The rate excluding scaffolding/ working platform/safety nets etc. which are required.

78 CONCRETE – JACKETING WORK (Conventional Micro Concrete)

Providing and Casting M 35 Conventional Micro Concrete with super plasticizers (FOSROC,

BASF or equivalent) for jacketing, for treatment to the damaged RCC members. The rate shall

include for providing and applying bonding coat by mixing Resin and Hardener in the ratio

79 NS 1:0:5, to surface of necessary watertight shuttering, placing & curing, providing and fixing shear Cu.m 25.00 - 20,000.00 - 5,00,000.00

keys as per specification. all complete as per the satisfaction of the EIC. For other structural

members provide necessary and approved pouring inlets. Curing for –“Concrete” should start

within 4 hours of pour and continue for stipulated time.

80 MICRO CONCRETE

A- Providing and applying 50/100/150 mm. micro concrete of MYK Arment Rearm Crete MC

micro concrete or equivalent as per specification at all heights to R.C.C. walls, etc. including

centering required for micro concrete pin anchor bolt , anchor fastener, including curing etc.

81 complete. (Addition upto 20% of aggregate is permitted as per site condition.)

82 POLYMER REPAIRS TO DAMAGED CONCRETE

Removing loose concrete Cleaning the rebars with rust converter of MYK Arment Rearm Rust

C & equivalent. Cleaning the concrete with compressed air. Applying two coats of Steel

Protective Coating to the rebars of MYK Arment FloArm Zinc ZP & equivalent. Applying bond

coat of MYK Arment Rearm Bond AR & equivalent Bonding Agent to the concrete and steel

surface. Applying MYK Arment ReArm Crete RMHS & equivalent Polymer modified cement

mortar to patch up the damaged concrete section in planks of 25 mm thickness. Curing the

repaired surface for 3 days The rate excluding scaffolding/ working platform/safety nets etc.

which are required.

Providing and applying old & new epoxy bonding agent MYK Arment ReArm Bond

EBA & equiavlent to old concrete surface by mixing resin and hardener in the ratio

84 NS 1:0:5 or(SBR 1:1 OPC + MYK Arment Rearm Bond SBR 45 & equivalent as per Sq.m 500.00 480.00 2,40,000.00

recommendation by manufacture. The rate excluding scaffolding/ working platform/safety

nets etc. which are required.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing internal cement plaster 12mm thick in a single coat using Ready to use wall

plaster to concrete or brick surface in all positions excluding scaffolding and curing

complete. b) cement ratio 1:6 With Prior Approval of Concerned Engineer-In-charge.

Providing external cement plaster in a double coat with First layer is of 12.5 mm and final layer

is of 6mm thickness using Ready to use wall plaster to concrete or brick surface in all positions

excluding scaffolding and curing complete. b) cement ratio 1:4 With Prior Approval of

Concerned Engineer Incharge

87 SCAFFOLDING/WORKING PLATFORM/SAFETY NET

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven

story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.

staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable

14.72 condition for the required duration as approved and removing it there after. The scaffolding

system shall be stiffened with bracings, runners, connection with the building etc wherever

required for inspection of work at required locations with essential safety features for the

workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational

area of the scaffolding shall be measured for payment purpose. The payment will be made

once irrespective of duration of scaffolding.

Providing and fixing Scaffolding net of required width made of high density Polyethylene UV

stabilized knitted on warp knitting machines having density 100 gram / sqm and shading

coefficient minimum 75% around the construction site/ for vertical extension as per requirement

including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete Sq.m 1500.00 29.25 - 43,875.00 -

as per direction of Engineer-in-Charge. (One time payment shall be made for providing

Scaffolding net from start of work till completion of work including shifting if any. The

89 Scaffolding net shall be the property of the contractor on completion of the work)

90 SUB TOTAL CIVIL WORK AMOUNT (A) 82,35,042.63 69,90,253.56

91 (ELECTRICAL WORKS)

92 POINT/ CIRCUIT/ SUBMAIN WIRING

Wiring for light point/fanpoint/exhaust fan point/call bell point with 1.5 sq.mm. FRLS PVC

insulated, copper conductor single core cable in surface/recessed medium class PVC conduit

with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm

93 FRLS PVC insulated copper conductor single core cable etc. as required.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm

FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing one/two module stepped type electronic fan regulator on the existing

97 modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

98 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC mtr 1380 334.00 - 4,60,920.00 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

99 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supply and fixing suitable size GI box with modular plate and cover on surface or in recess,

103 1.31 including providing and fixing 3 pin 5/6 amps modular socket outlet & 5/6 amps modular each 73 477.00 - 34,821.00 -

switch etc. as required.

Supply and fixing suitable size GI box with modular plate and cover on surface or in recess,

104 1.32 including providing and fixing 6 pin 15/16 amps modular socket outlet & 15/16 amps modular each 39 586.00 - 22,854.00 -

switch etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in

1.57 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, each 9 727.00 - 6,543.00 -

105 "C" curve including connections, painting etc. as required.(Instant geyser)

106 DISTRIBUTION SYSTEM

Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board,

415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

109 complete with connections, testing and commissioning etc. as required.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Supplying and fixing 5A to 32A rating, 240/415 V, 10 kA, "C" curve, MCB suitable for inductive

111 load of following poles in the existing MCB DB complete with connections, testing and

commisioning etc as required.

Supplying and fixing of following rating MCB/ isolator in existing distribution board including

113 connections etc, as required.

INTERNAL WIRING & CONDUITING OF LV SERVICES (TV, TELEPHONE, DATA, CCTV)

Supplying and fixing of following sizes of PVC conduit along with the accessories in

116 surface/recess including painting in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required. ( For TV, Telephone & DATA)

Supply and fixing following size/modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

119 1.27.1 1 or 2 module (75mmX75mm) - For TV, Telephone, HDMI & DATA outlet socket each 30 298.00 - 8,940.00 -

Supplying and fixing following modular switch/ socket on existing modular plate and switch box

including connectionet. As required.

121 1.24.6 Telephone socket outlet each 16 148.00 - 2,368.00 -

122 MR RJ-45 DATA socket outlet each 14 466.00 - 6,524.00

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/

PVC conduit as required.

Supplying and drawing in existing conduits and testing & commissioning of following multicore

PVC insulated PVC sheathed annealed tinned copper conductor 0.5 mm dia telephone wires

conforming to ITD-S/SW-113B including terminal joints complete as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable

trays with perforation not more than 17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders

etc as required.

128 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness mtr 100 543.00 - 54,300.00 -

SUPPLY & INSTALLATION OF LIGHTING FIXTURES, CEILING FANS, WALL FANS,

129 EXHAUST FANS

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Installation, testing and commissining of prewired flourescent/ compact flourescent of all type

complete with all accessories and tube etc. directly on ceiling/ wall including connection with

1.5 sq mm FRLS PVC insulated copper conductor single core cable and earthing etc. as

Installation , testing and commissioning of ceiling fan including wiring the down rod of standard

length (UP TO 30 CM) WITH 1.5 SQMM FRLS PVC insulated copper conductor, ingle core

cable, including sproviding and fixing phenolic laminated sheet cover on the fan box etc. as

Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the

132 1.50.1 hole to suit the size of the above fan, making good the damage, connection, testing, Each 19 450.00 - 8,550.00 -

commissioning etc. as required.

133 1.51 Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes. Each 19 207.00 - 3,933.00 -

Supplying and fixing 3 pin 5 amp ceiling rose on ceiling junction box including connection etc.

Supply of pre-wired LED fittings of all types, complete with all accessories and LED tube/lamp,

driver etc. as required.

136 NS 20 W ceiling/surface mounted LED tubelight Each 163 - 324.00 - 52,812.00

137 NS 15 W LED wall bracket type fixture Each 6 - 305.00 - 1,830.00

Supply Ceiling fan of 1400 mm,suitable for 230 volts, 50 Hz Electrical supply, BEE 5 star

labelled ceiling fan complete as required.including providing all accessories ,as required.

Supplying of 400 mm dia wall bracket fan complete with all accessories including connections

etc. as required.

Supplying Fresh air cum Exhaust Fan of light duty 250V A.C 50 cycles 300 mm 1400 RPM

140 MR metallic body, plastic blades, wire mesh etc. including all necessary accessories compete a Each 19 - 2,944.00 - 55,936.00

141 SUB TOTAL ELECTRICAL WORK (B) 14,19,933.00 3,62,042.00

142 PLUMBING WORK (Water Supply) (Internal)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge. Concealed work, including

cutting chases and making good the walls etc. (DSR 2023 18.8)

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

145 18.8.2 20 mm nominal dia Pipes Metre 12.00 537.60 - 6,451.20 -

146 18.8.3 25 mm nominal dia Pipes Metre 5.00 627.25 - 3,136.25 -

147 18.8.4 32 mm nominal dia Pipes Metre 5.00 739.30 - 3,696.50 -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply and all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in

Charge.Internal work - Exposed on wall. (DSR 2023 18.7)

149 18.7.1 15 mm nominal dia Pipes Metre 10.00 286.80 - 2,868.00 -

150 18.7.2 20 mm nominal dia Pipes Metre 5.00 335.00 - 1,675.00 -

151 18.7.3 25 mm nominal dia Pipes Metre 12.00 401.55 - 4,818.60 -

152 18.7.4 32 mm nominal dia Pipes Metre 12.00 518.75 - 6,225.00 -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,

153 including cutting and making good the walls etc. (DSR 2023 18.10)

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : (DSR 2023 18.18)

157 18.18.1 15 mm nominal dia Pipes Metre 3.00 406.85 - 1,220.55 -

158 18.18.2 20 mm nominal dia Pipes Metre 2.00 462.50 - 925.00 -

159 18.18.3 25 mm nominal dia Pipes Metre 1.00 464.05 - 464.05 -

160 NS 32 mm nominal dia Pipes Metre 1.00 1,121.40 - 1,121.40

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

161 pipes but without fittings and the base support for tank. (DSR 2023 18.48)

Providing & fixing HI/LO level indicator cum controller with necssary sensor probes including

wires,conduits and associated accessorie as required.

Disinfecting G.I. water mains of entire work by flushing with water containing bleaching powder

at 0.5 gm per litre of water and cleaning the same with fresh water, operation to be repeated

three times including getting the samples of water from the disinfected main tested in the

municipal laboratory.

164 Internal Drainage

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Supply, Fabrication, Installation, Testing, Balancing and Commissioning in position Low noise

Silent SWR Poly Vinyl Chloride (PVC) class B 6Kg/Cm² pipes as per IS 13592 and IS

14735, shud be sustain for 13 dB at 2 lps as per EN 14366 with an integral groove to hold the

rubber gasket, having thermal stability to take care thermal expansion/contraction & Special

NS brackets to dampen vibrations, including all SWR PVC plain & modulded fittings, including

concealing the pipes in walls or under floors, including making chases in the walls, fixing

vertically against walls by specially made with Hi-tech clamp with EPDM (FLAT) rubber, Z

bracket 5mm thick at every 2m c/c. making good the same, includes jointing of pipes & fittings

165 etc. complete as per direction of Engineer in Charge. (For Internal Toilet)

Providing, fixing, testing and commissioning of SWR-PVC class B Multifloor Trap with 50mm

water seal with 80 mm nominal bore outlet, conforming to IS : IS: 14735 , required 3 no. of inlet

170 NS connections for 32/40mm dia waste drains, including setting with cement concrete 1:2:4 (1 Nos. - 390.00 - -

cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of cutting and

making good the walls & floors wherever required.

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-PVC

class B Nahani trap with 50mm water seal with 80 mm nominal bore outlet, conforming to IS :

IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in proper condition and

171 NS shape after placing the trap in right position complete as required. Trap shall include 125/100 Nos. 2.00 375.00 - 750.00

mm dia C.P. brass heavy duty grating with frame of approved design including setting in floor

with cement motor to match with floor finish as per Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-PVC

class B Cleanout Plug with 50mm water seal with 80 mm nominal bore outlet, conforming to

IS : IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in proper condition

172 NS and shape after placing the trap in right position complete as required. Trap shall include

125/100 mm dia C.P. brass heavy duty grating with frame of approved design including setting

in floor with cement motor to match with floor finish as per Architect’s requirement.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-PVC

P Trap with 50mm water seal with 80 mm nominal bore outlet, conforming to IS : IS: 14735 ,

cutting chase / hole in floor / slabs and bringing the same in proper condition and shape after

placing the trap in right position complete as required. Trap shall include 125/100 mm dia C.P.

brass heavy duty grating with frame of approved design including setting in floor with cement

motor to match with floor finish as per Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioning straight/offset type

flexible single body push fit type WC Pan Connector with factory supplied seal guard with

integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use

with CI Pipe as supplied with Pan Connector (For European water closet).

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

12.22 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and Nos. 2.00 298.25 596.50 -

a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR

Providing and fixing C.I Grating for Rain water pipes & balcony pipes fixed in cement mortar

1:2 to coarse sand.

180 Sanitary Fixtures

NOTE: Sanitary fixtures and C. P. fittings will be supplied by the owners. However all other

piping accessories and consumables required for fixing and connecting of these fixtures, such

as brass screws, M. S. screws, teflon tapes, hodfasts are to be provided by Contractor at no

(If sanitary fixture will be provided by the owner then other item will be provided by the

181 contractor with no extra cost )

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous china cistern

with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including

seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR 2023 17.78)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.

183 17.16A triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - Nos. 2.00 349.15 698.30 -

charge (DSR 2023 17.16A)

Fixing, jointing, and testing in position approved make 15mm dia. C.P. Bib cock / Pillar cock

with areator consisting of the following including making water connections.

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

185 quality conforming to IS:8931 (DSR 2023 18.53)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112

187 17.71 mm distance from wall of standard shape with bracket of the same materials with snap fittings Nos. 2.00 168.35 336.70 -

of approved quality and colour, weighing not less than 105 gms.(DSR 2023 17.71)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

188 17.7A taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:(DSR 2023 17.7A)

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole

189 basin mixer

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per

the direction of Engineer-in-charge.(DSR 2023 17.72A)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal

basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing

191 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and making good the walls and

floors wherever required : (DSR 2023 17.4)

Range of two urinal basins with 5 litre white P.V.C. automatic

flushing cistern

193 17.34 Providing and fixing toilet paper holder : (DSR 2023 17.3)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.

195 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required : (DSR 2023 17.10)

196 Stainless steel single sink with single drain board

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms. (DSR 2023 18.51)

Supply and fixing 10 mm thick clear toughened glass wih edges polished cut to required profile

as per drawings for urinal partitions of overall size 1200 mm x 400 mm with frosted glass film

199 NS as approved and fixed to wall using SS glass connectors for wall to glass Supply,fixing of Nos. 1.00 2,500.00 - 2,500.00

required angle and of approved make, including cutting holes in glass, silicon sealant etc. all

DSR-REF Rate Amount

S.No. Description of items Unit Quantity

2023 DSR NS DSR 2023 NS

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of

approved quality and colour. (DSR 2023 18.74)

201 18.74.2 15 mm nominal bore with 45 cm length Nos. 8.00 121.9 - 975.20 -

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

202 17.31 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws Nos. 2.00 1607.95 - 3,215.90 -

and washerscomplete.(DSR 2023 18.31)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with

203 17.72 minimum distances of 37 mm from wall face with concealed fittings arrangement of approved Nos. 2.00 231.95 - 463.90 -

quality and colour,weighing not less than 88 gms. (DSR 2023 17.72)

204 SUB TOTAL PLUMBING WORK ( C) 1,57,637.00 61,552.00

205 (FIRE FIGHTING WORKS) (D)

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge

206 NS type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. Each 10.00 - 17400.25 - 1,74,002.50

M. S. flat with nut & bolts routed in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg

capacity with necessary clamp for erection on wall.

Providing Round bottom fire bucket of 9 Litres capacity as per IS :2546 made out of 24 gauge

208 NS G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Each 4.00 - 1750 - 7,000.00

Mark, on provided stand/ wall hook complete

209 SUB TOTAL FIRE FIGHTING WORK ( D) - 2,46,628.00

TOTAL AMOUNT ( DSR +NDSR) 1,74,73,089.00

TOTAL AMOUNT ( DSR +NDSR) 1,74,73,089.00