SPL REPAIR TO OR LIVING BATHROOM BLDG NO P-198, P-200, P-204 AND P-214 OF 12 JAT AT BHAGAT LINE AND PROVN OF TOILET BLOCK AT 20 SIKH BHAGAT TRG AREA UNDER AGE B/R-III AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc complete all as specified & directed

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B' bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Taking down old existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed.

M&L for 40mm thick average thickness of PCC 1:2:4 type B 1 (using 20mm graded stone aggregate) as in padding on roof finished even and fair without using extra cement. Complete all as specified and directed.

Material and labour for sub main wiring with 6 Sqmm Nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single co

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyester fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturer’s instructions. Complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. Complete all as specified and directed.

Material & labour non-skid coloured ceramic tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Taking down cement or lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

& L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed,

& L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete as specified & directed

M&L Rendering 5mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wire mesh as approved before plastering on ceiling complete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk] wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast] lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm & 2 Nos 150mm aluminium door handle in each door as per direction of Engineer-in-Charge.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/

borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-ln-Charge.

S&F 15 mm bore, unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, Complete all as specified and directed.

SAF PVC mirror cabinet of approved make, white/coloured with Modiguard/saintgobin mirror size 12cm depth, 31 cm width, 54cm height complete all as specified and directed.

S&F, structural steel work as stairs (framed) including stringers, treads, landing, balusters, hand rails etc, in cluding cleats, brackets, etc. Complete all as Specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified & directed.

Preparation of plastered or unplastered surfaces including scraping/removing of existing/old treatment of wall, applying 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsion distemper using roller complete all as specified & directed.

All as per item No 61.00 here-in-before but as in ceiling, soffit, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed

M&L, TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colu

All as per item No 67.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L 75mm PVC (SWR) multi floor trap in repair, plain with grating including jointing with solvent cement complete all as specified and directed.

All as per item No 85.00 here-in-before but without glazing bar.

S&F, Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and exc 1.5m and n. exc. 3m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out complete in soft / loose soil for demolition of existing complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M&L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L PCC Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank set in cement mortar 1:6 including necessary form work, placing in desired placing and demolition and breaking of old cover slabs complete all as specified and directed.

M & L PCC ( 1:4:8 ) type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete. Complete all as specified and directed.

MSL SUPPLY/ LAYING and fixing 25 mm bore galvanised steel tubes medium grade with all fittings laid in trenches for cable protection complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With grey Cement and no pigment laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

Preparation of New plastered or unplastered surfaces of wall and applying 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsion distemper using roller complete all as specified & directed.

Preparation of New plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.

Preparation of New plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L, Hardcore of brocken bricks of gauge not exceeding 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L, 75mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in subbase complete all as specified and directed.

Supply and fix nonskid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F, Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L, 75mm thick, Cement concrete 1:3:6 type C-2, (40mm graded aggregate) as in plinth protection, laid in alternate bays, complete all as specified and directed.

S&F, Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M & L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry With top ring of M-25 concrete including intercepting chàmber and screen chamber made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40m dia 3.0m deep. Complete all as specified in drg No TD-309 sheet No 1/4 to 4/4.

M & L Septic tanks, exc in ordinary s

oil, foundation in PCC 1:2:4, brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all round / fibre reinforced cover with iron frame Vent shaft and sludge chambers etc, complete for 50 users. Complete all as specified in drg No TD-217 sheet No 1/7 to 7/7.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Providing, cement concrete, Type B-0, 1:2:4 (12.5mm graded aggregate) as in copping complete all as specified and directed

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 on roof surfaces with and including water proofing compound 200ml/per cement bag of 50 Kgs or as per manufacturer's instruction complete all as specified and detected

Per Point

per Point

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grpde with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x4 sqmm wire and one 4.0 sqmm earth shall be measured as one unit length.

Per point

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integrated type complete with all accessories and fixing material complete all as specified and directed

Supply and fixing lamp holder, PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. complete all as specified and directed.

S&F gun metal gate valve of Size 25mm with iron wheel head, screwed both end for iron pipe following bore of pipes. Complete all as specified and directed.

M&L GI bends Tee pieces single branch "Y' junction double branch cross collar caps, and plug upto 50mm bore complete all as specified and directed.

Supply and fix decorative LED Batten 10 Watt polycarbonate housing integrated type complete with all accessories and fixing material complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps, C curve, 10 kA, complete all as specified and directed

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 450mm sweep with blade , frame and lauvers complete all as specified and directed.

Supply and fixing exhaust fan Plastic body AC single phase 230 V of size 250mm sweep with blade , frame and lauvers complete all as specified and directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with Gl wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel Gl protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part-I connecting to main switch board I Main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around Gl earth plate, Gl pipe medium grade 20mm nominal bore watering pipe Gl sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C-1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Each Set

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of Gl pipe medium grade including clamps and nuts and bolts. Complete all as specified and directed.

Supply, laying commissioning, testing of XLPE underground LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. Complete all as specified and directed