REPAIR TO FLOOR, JOINERY, WALL PLASTER, WATER SUPPLY, SANITARY FITTINGS, PLUMBING WORKS ETC IN CHUNABHATTI UNDER AGE B/R-I KARANJA

Amount

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface all as specified and directed.

M & L Virified Ceramic tiles (dark shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.

M & L Virified Ceramic tiles (dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed.

Demolition of cement oncrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L 40mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection all as specified and directed.

M&L100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed.

M&L Green marble 18-20 mm thick as in (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking plateform and like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match incl 20 mm thick screed/backing coat in CM 1:3 complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and incl 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc., complete all as specified and as directed.

M&L Granite(of any type)tiles 20mm thick as in floors and similar works over 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing all as specified and directed.

M&L Granite(of any type)tiles 20mm thick as in skirting/dado and similar works over 10mm thick screed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing all as specified and directed.

M&L exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment as per 15 1237-1980 (Reaffaired in 2006) design as CHITRA type (samples approved by Engr-in-Charge) over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed.

All as item above item except fixing tiles all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each.

All as per item above but exc 1.50 Sqm n.exc 4 Sqm.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,star lock, rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F in repairs aluminium window bearing any size of windows (incl taking down and refixing the same opening complete all as specified and directed.

S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, all complete as per requirement and direction of EIC.

M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints.

S&F 35mm thik plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated.

S&F 30mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a).

S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I all as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified.

S&F MS butt hinges100mm long medium weight, cold rolled.

S&F 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F 125 mm long extruded alu alloy handles, fabricated type, anodised.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples as in repairs.

S&F Rim latch with 2 levers, of brass body, polished bright, stove enamelled finish; with brass knob or lever handle etc all as specified and directed.

S&F in repairs star lock for window incl all necessary fittings complete all as specified and as directed.

S&F in repairs aluminium windows bearing per any size of windows (including taking and refixing the same position) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with putty or fixed with beads.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified.

Demolition of wall stone/brick masonry built in cement mortor including all quoins arches pillars etc, completed all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed.

M&L Brick work with burnt clay bricks sub class ‘B’ brick straight or curved on plain to any radius in half brick thick walls built in cement mortar 1:4.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.

M&L 20 mm thick polymer modified ready mix cement based plaster on external surfaces incl WPC @ 3% by weight of cement complete all as specified and directed.

M&L 5 mm thick polymer modified ready mix cement based plaster on ceiling surfaces complete all as specified and directed.

M & L 8 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered surface of walls and for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

Chipping , removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete all as directed. (Hard concrete should not be removed by force).

M & L for Carrying out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete.

M&L for Cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency , Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

M&L Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including, Mixing of materialas: Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit (2 to 3kg/cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

M & L in replacement of corroded steel reinforcement with new/fresh reinforcement complete all as specified & as directed by Engineer-in-charge. (Note: Replacement of corroded steel reinforcement to be undertaken when 20% of cross section is reduce due to corrosion)

M & L for anticorrosive Treatment to Reinforcement by application of two coats of IPNET RB (CBRI Know how) by brush on exposed reinforcement with time interval of minimum 4 hours between each coat all as specified and directed.

M&L Providing and applying structural grade epoxy-latex bond coat prior to application of any type of mortar confirming to ASTM-C- 882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application all as specified and directed.

M&L Building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1Cement- 3 part graded cleaned pre-packed river sand- 5 to 10% latex mortar by weight of cement- 0.35% w/c ratio) in 20 mm thickness including leveling profiling etc. complete all as specified and directed.

Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete) all as per manufacturer's instruction and as directed by the Engineer-in-Charge.

Taking up or down 15mm dia GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified..

Taking up or down 20mm dia GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified..

S&F Mild steel galvanized tubing 15 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

S&F Mild steel galvanized tubing 20 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Taking down of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with al fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Taking up or down 25mm bore CPVC pipes and concealed connection including, cleaning for refixing or removal to store complete all as specified and directed by Engineer in Charge.

Supplying and fixing of 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with al fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Supplying and fixing of 25mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

S&F in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge.

S&F in repairs, 10litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified .

S&F in repair vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete.all as specified .

S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .

S&F in repair Chromium plated soap dish including fixing arrangement complete all as specified and directed .

M&L in repairs CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

M&L in repairs CI Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

Petty repair to plain cement concrete type B1 (using 20mm graded aggregate) 1:2:4 in floor,column , beam,window cill,door cill,balcony rep etc area n. exc 2 sqm of any height of bldg using scaffolding including matching to existing surfaces complete all as specified

Petty repair to cement plaster in CM 1:4 as in wall,ceiling ,column , beam,window cill,door cill,balcony rep etc area n. exc 2 sqm any height of bldg using scaffolding including matching to existing surfaces complete all as specified

Petty repair to alginment for aluminium section/wooden of windows/ joinery doors including all necessary fittings as required such as hook & eye, hinges, tower bolts, siliding door bolt, rollers required for sliding repairs, handles including silicon gun paste around windows screws resecuring or easing & adjusting aluminium door/window shutter such as tightening/provn of fasterners, hinges, rubber gasket, rubber beading, bottom bearing( like roller of window/door,butt hinges ,handle,tower bolt, bottom bearing,rubber beading , bow handle etc complete) and clips etc (including taking and refixing the same position) complete all as specified and as directed

Petty repair to wooden door,PVC door, cupboard door,wardrobe door shutter including roller ,windows etc with minor repair and aligment to openable with assessories if requred any ( like rooler of cupboard door ,butt hinge ,handle,tower bolt, bearing, beading, bow handle etc complete) (including taking and refixing the same position) complete all as directed

Petty repairs to leakage of bib taps, pillar cock stop cock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers,spindle or any other minor accessories etc (including taking and refixing the same position) complete all as specified and directed

Petty repairs to refixing the existing Wash hand basin and Sinks made of stainless steel 1mm thick kitchen flat back with including fixing cantilever CI/Angle iron brackets embedded in concrete block including connecting waste coupling 32mm bore, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall and connecting union to pipe, filling gap in white cement and all neccessary fittings to fixed in repair (including taking and refixing the same position) complete all as directed.

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush (including taking and refixing the same position) all as directed

Petty repair to wall mixer,basin mixer,sink mixer etc including spindle, rubber washer etc (including taking and refixing the same position)Complete all as directed

Petty repair to internal water/external inlet water GI pipe line n exc 1 RM any type including socket,elbow,nipple ,with repair to water blockage , pipe line leakage (arreat the leakage incl all fitting) including concealed water tubing etc at of any height using scaffolding (including taking and refixing the same position) complete etc all as directed

Petty repair to internal water/external inlet/concealed water pipe line n exc 1 RM any type CPVC/HDPE/KITEC including socket,elbow,nipple ,with repair to water blockage , pipe line leakage (arreat the leakage incl all fitting) including concealed water tubing etc of any height using scaffolding (including taking and refixing the same position) complete etc all as directed

Petty repair to renewing glazed or ceramic tiles in patches area not exceeding 10 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed

Petty repair to toilet floor seepage n exc 2 Sqm including sunken portion treatment with water proofing compound including repair to floor trap,nahani trap , grating etc complete all as specified .

Petty repair to leakage of n exc 2 RM rain water pipe,leakage of vertical sewage CI /PVC pipe,including change of elbow,Socket,Bend with water sealent compound etc of any height of bldg using scaffolding complete all as specified .

Petty repairs to fixing only of bib taps, pillar cock stop cock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by and any other minor accessories etc complete all as specified and directed

Repair to any type any size of balcony grill of any height including hand rail with cover of PVC including welding, dismentling ,fixing in cement concrete in 1:2:4 and matching to existing surfaces complete using 16/20 mm square/round bar including painting complete all as specified and directed .

M&L Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified by Engr-in-charge

S&F in repair PTMT cabinet with mirror of size 555x450x124mm complete all as manufacures instruction.

S&F in repair PVC coated mild steel curtain rod fancy type (colour as approved) of 20 mm bore including brackets, stops, rollers, etc. and fixed to wall with steel screws complete all as specified and as directed .

S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge.

S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm fixed in repair complete all as directed.

S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .

S&F in repair 15mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed

S&F in repair 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge.

S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified

S&F in repair waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair waste coupling 40 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed .

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified .

S & F in repair PVC waste pipe 32 to 40 mm for WHB/Sink up to floor trap and fixed complete all as specified

S & F in repairs brass chromium plated overhead shower 150mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed .

S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified .

S&F in repair 25 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified .

S&F in repair brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engineer in Charge.

Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified and directed.

S&F Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L 4mm thick Non-asbestos fibre cement building boards in ceiling fixed or laid/inserted GI/Aluminium framework with screws as in ceiling.

M&L 4mm thick Non-asbestos fibre cement building boards in ceiling fixed or laid/inserted GI/Aluminium framework with screws as repairs in ceiling.

S&F in repair 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified .

S&F in repair 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified .

M&L in repair 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed.

S &F in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

Demolition of cement concrete of any description in any position not otherwise specifically provided for.

Water proofing treatment to sunken floor of RCC slab as following steps-

(a) After cleanig the surface applying a coat of cement slurry @ 3kg/sqm and 15mm thick cement plaster in 1:3 with WPC @ weight of cement on bottom/sides of RCC.

(b) Applying first coat of chemical pidifin 2K (DR Fixit or equivalent) on cleaned plastered surfaces @ 0.86 kg/sqm (min) as recommended by manufacturers. Then Provide a layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as manufactures recommendations. After Apply second coat of chemical pidifin 2K (DR Fixit or equivalent) @ 0.86 kg/sqm (min) layer glass fibre mesh as recommended by manufacturers.

(c) Spouts of 40mm dia PVC pipes projecting at least by 150mm clear of face of the outer wall.

(d) 30 mm thick PCC 1:2:4 type C1 using 20mm graded stone aggregate mixed with WPC @ 3% by weight of cement shall be provided on bottom.

(e) 15mm thick cement plaster in 1:3 with WPC @ by weight of cement on sides of RCC.

(f) After laying of CI connections apply two coats of hot bitumen 85/25 grade @ 1.7 kg/sqm over vertical sides and floor of sunken portion.

(g) The sunken portion shall be filled with PCC 1:7:12 type F2 using 40mm brick aggregate after carrying out required test for joints/water proofing. Note 1:- The treatment shall also be provided over side wall upto a ht of 150 mm above FFL Note 2:- Water proofing treatment will be carried out through authorised applicators approved by GE and testing charge included in item rate.

M&L 40 mm thick, Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate)as in floors finished even and smooth using extra cement.

Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning all as specified.

S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius.

S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius.

S&F 110mm bore PVC (SWR) cowl any radius.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Supply only integral water proofing compound.

S&F Grating square/rectangular 150mm size of PTMT (Minimum weight 100gms) complete all as specified .

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165.

M&L for preparation of old floor surfaces of any descriptions and any position & applying one coats of terra cotta exterior grade paint on floor/tiles etc complete all as specified and directed.

Cleaning of chequred tiles, Interlocking tiles and floor sufaces for and removal of vegetation to free growth etc on external surface of floor and rubbing, cleaning the surface and removing the debris to a distance not.exc 50 metre complete all as specified and directed.

M&L for preparation old or untreated surfaces of painting brick, stone, concrete, AC sheet, GI sheet, plaster surfaces of any description over 10cm width or girth priming paints plaster coat and applying two coat of sythentic enamel paint all specified.

M & L for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

M & L for re-writing letters or figures (Block, Roman, Italic or Indian) n. exc 30 cm high and width, complete all as specified and directed.

M & L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessory scaffolding etc for plants / vegetation of size 0-20 cm girth complete all as specified and directed for buildings upto and including 4 storeys.

Everest Construction

INDIA ENGINEERS AND CONTRACTORS

M/s S.D Construction Co

Dinesh Enterprises