Repair to Joinery and connected B/R work

Amount

Taking down Chowkats or frames exc exceeding 1.5 Sq. M but n exc 4.0 Sqm each (Without taking off shutters from the frame)

Taking down Chowkats or frames n exceeding 1.5 Sq. M each (Without taking off shutters from the frame)

S&F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down of shutterof any description exc 1 sqm n.exc 2 sqm each complete all as specified and as directed by engr-in-charge.

Taking down of shutterof any description exc 2 sqm each complete all as specified and as directed by engr-in-charge.

M&L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in all as specified

S&F factory made flush shutters 30 mm thick ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm)

S&F Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

S&F Factory made steel windows /ventilators, Box type, fixed type complete with glazing bars, dovetailed or welded fixed as IN REPAIR complete all as specified For Details refer CE CZ Chandigarh Drg No. TD-219 sheet 1/3 to 3/3. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separate

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

M&L Preparation of New or previously untreated steel surfaces based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide all as specified and as directed.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick (10mm + 5 mm) in cemet mortar 1:4 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L applying 02 coats of OBD oil emulsion (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to old wall surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer including complete removal of existing treatment complete all as specified and directed.

M & L for preparing new plaster surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint by using following brands of cement based paint by roller complete all as specified & as directed by Engineer-in-Charge.

S & F Aluminium handles 150 mm cast type anodised complete all as specified and directed.

S & F 150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150mm Aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium, alloy and fixed complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue and 150 mm overall length of cover plate, anodised, with hard drawn steel spring , fixed in floor

S & F Butt hinges heavy wight , cold rolled mild steel and fixed complete all as specified and directed.

S & F anodised aluminum frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. including powder coating to minimum thickness of powder coating 50 micron complete all as specified and directed by Engr-in-charge.

Supply and fix anodised aluminum window and ventilators shutters ,hung/sliding type without sash bars , aluminium section , weighimg 0.55kg/m including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading , screws etc complete all as specified.

Supply and fix 3.0 mm thick figured glass , pinched type in squares n exc 0.5 sq.m each pane completely as specified and directed by Engr-in- charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with aluminium beading/steel/wooden frame work in squares in each pane complete all as specified and directed

S&F factory made aluminium 50 micron powder coated grill, complete fixed in position in windows in all respect as specified and directed by Engr-in-charge.

M/s Guddu Builders

S M BUILDERS