Upgradation of Badamwari Park at Srinagar BWO Renovation of view Point, well of waris Shah, Public Convenience and Fountain Srinagar (Additional Works).

Providing and fixing white vitreous china flat back or wall cornertype lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend

S/P/F of 12"dia exhaust fan havells/Usha make etc Complete job

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 893

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

MAIN FOUNTAIN

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles above 25 mm and upto 40 mm

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and Applying water proofing material in cement plaster work in proportion recommended by the manufacturers

Providing and fixing of G.I Pipes ( Laying and Fitting) compltet with G.I fittings including trenching & refilling etc Complte Job 100 mm Dia Pipe

WASHROOMS AND WALLS

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to preare the surface even and smooth complete.( 2 mm)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

WASHROOMS AND KITCHEN

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area beyond 3 sqm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 35mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood(35mm)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 100x10mm

Providing and fixing bright finished brass handles with screws etc. complete :125mm

Providing and fixing bright finished brass handles with screws etc. complete 100 mm

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Cleaning of wall and floor tiles in bathrooms and kitchens, including removal of stains, dirt, grease, and scum using approved detergent/chemical solution, washing with clean water and wiping dry to give a neat and hygienic surface complete as directed by Engineer-in-Charge.

Fine Chiselling and dressing of existing devri stone work (in wall, stairs, or gate), including removing irregularities, dirt, and loose particles, dressing the surface to required line, level, and finish with hammer and chisel, cleaning the surface with water, and disposing of stone chips and debris within 50 m lead, complete as directed by Engineer-in-Charge.

Refixing of available devri incl. placing in position with 1:6 mortar incl. all leads , lifts upto site..

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed. Fine chisel dressed

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

P/A surkhi pointing on existing brickwork with 1:1:1(lime:sand:surkhi) with all necessary scaffolding incl grinding ,cleaning,watering and removing of existing joints by mechamical/ manual means involved in job complete.

Refixing of existing wooden grill in postion and dismantling deterioted wooden pieces , incl. scrapping of old paint paint and applying two coats of enamel paint complete job as directed by EIC.

Providing wood work in frames(wooden railing) of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood

For kitchen

P/F of thermo heated water geyser of approved brand havels or equivalent incl. necessary fiting 50 ltr.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm

P/Fof PVC waste pipe for sink or washbasin including PVC waste fittings complete flexible pipe 40mm dia

P/F of C.p grating on floor traps complete job

P/F of cp mixer for kitchen sink of approved brand incl. all fixtures complete job.

p/fixing of FAN point including wiring for FAN point in 1.5mm sq.mm pvc insulated copper wire and 2.5MMmm sq pvc INCLUDING insulatATION OF 1200MM /CIELING FAN/225MM EXHAUST FAN multistrand copper wire for FAN POINT WITH 350 WATT FAN DIMMER sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE .

Providing and fixing stainless steel (Grade 304) railing made ofHollow tubes channels, platesetc.including welding,grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dashfasteners,stainless steel bolts etc. of required size, on thetop of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge(for payment purpose only weight of stainless steel members shall be considered.2.5kg/rm

Supply and fixing of chrome-plated brass pipe connection, 15 mm nominal bore, 600 mm long, including fittings, supports, and jointing with approved material, complete as directed by EIC.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class kail wood 50 x 12 mm

P/f of glass panes with wooden fillets of required size wherever necessary. Glass panes 3.5mm thick weighing 8.7kg/sqm.

P/FIXNG OF PVC CONDUIT OF APPROVED BARND AND MANUFACTURE WITH ALL THE NECESSARY BENDS INVLOVED IN FITTING COMPLETE JOB 20 MM

P/fixing of lighting point includimng wiring for lighing point in 1.5mm sq.mm pvc insulated copper wire for lightingsub mains 6 amp one way switch.2mm thick pvc conduit/channael with bends .junction boxes etc,6Amp S.pole MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE WITH 9 WTT LED LIGHT WITH THE ACCESORIES INVLOVED IN MAKING ONE POINT FUNTIONAL COMPLTE JOB

p/fixing of HEATING point includimng wiring for HEATING point 4MMmm sq pvc insulated multistrand copper wire for HEATING POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE

Tile brick masonry with common burnt clay non modular tile bricks of class designation 10 in plain arch work in superstructure above plinth level upto floor five level in LIME SURKHI mortar 1:1:3(1LIME 1 CEMENT :4 SURKHI) including curing, centering and shuttering complete.( MAHARJA TYPE )

P/FIXNG OF EXAUST FAN OF APPROVED QUANLITY AND BEAND WITH SHUTTER TYPE 250X250 INCLUSING PROVIDING AND FIXING OF 1.5 MM WIRE WITH ALL OTHER ACCESSORIES TO MAKE IT FUNCTIONAL LIKE MCB ,6AMP SWITCHK HYLEM PLATE FOR SWITCH COMPLETE JOB

P/L of Ceremic glazed floor tiles 300x300mm