REPAIR TO ROOFING, CEILING, FLOORING ETC AT DAGSHAI AND REPAIR AND MAINT OF LT NETWORK POLES, DIFFERENT EQUIPMENT AS SERVO STABILIZER, LT BOX, CONNECTED ITEMS AT SOLAN MIL STATION UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards/kitchen cupboard , any thickness etc. including cover fillets complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified.

Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified by the Engr-in-Charge.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) up to a height 12 mtr including necessary scaffolding all as specified and as directed.

M & L for taking down cement or lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 20 mm bore complete all as specified and as directed by the Engineer-in-Charge.

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings complete all as specified and as directed by the Engineer-in-Charge.

S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and bend to curve all as directed

S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and as directed.

Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

M&L for brick work with sub class `B` bricks, in straight or curved on plan in any radius , built in CM 1:6 complete all as specified and directed.

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces/stone work incl finishing surface w/o using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for 6 mmPlywood, grade BWR, type BB, fixed with screws to timber frame work all as specified and directed.

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc6 & n. exc 13 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

S&F PVC rain water half round gutter pipe of size 110 mm dia fixed with clamp up to a height 12 mtr including necessary scaffolding all as specified and as directed .

S&F PVC rain water gutter drop elbow for 110 mm dia pipe fixed to PVC pipe all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to rain water gutter pipe and fixed to wall with clamp up to height lamp up to a height 12 mtr including necessary scaffolding all as specified and as directed .

S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to rain water gutter pipe and fixed to wall with clamp up to height lamp up to a height 12 mtr including necessary scaffolding all as specified and as directed .

S&F PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) bend 75mm dia bore plain in cement concrete type B-1(1:2:4) and jointing to waste pipe complete including taking out old unserviceable floor trap all as specified and directed .

M&L for MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required complete all as specified and as directed by the Engineer-in-Charge.

Preparation of newly plastered surfaces of wall & applying two coat of cement based paint over a coat of primer complete all as specified and directed

Preparation of new surfaces applying two coats of oil bound distemper over one coat of primer on walls all as specified and directed by the Engr-in-Charge

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed complete all as specified and directed by Engr-in-Charge

M&L for complete removal existing treatment of steel surfaces and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed

M & L for two coats of synthetic enamel paint over coat of pink primer on new wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and as directed by the Engineer-in-Charge

M&L preparation of old painted NTP/CGI/PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint as approved complete all as specified

M&L for complete removal existing treatment on old painted NTP/CGI/PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying two coat of synthetic enamel paint of any tint as approved over a coat of primer all as complete all as specified

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.etc complete all as specified.

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed.

M&L for fixing 1.50 mm thick Plastic dividing strips, 38 mm wide insertred in position all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in hard/ dense soil etc complete all as specified.

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

Repair of rolling shutters of width and height n exc 4 mtr including necessary welding arrangement and repair / refixing of small parts like ball bearing etc,,and greesing / oiling and make workable conditon all as specified and as directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or beyond the lead up to 2 km included in the rates, including loading, unloading and stacking at the destination all as specified and as directed.

Dismantling of 0ld UNSV ACSR or AAC conductors, any type and size from the poles complete, all as specified and directed by Engr-in-Charge.

Supply and fixing new ACSR conductor including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc, complete, all as specified and directed by Engr-in-Charge.

Dismantling stay assembly complete all as specified and directed.(demolition of concrete, etc. and excavation measured separately)

S&F Stay assembly complete with accessories as shown in electrical plate No-1 (loop type insulator, stay clamps, excavation and concrete measured separately) with stay rod 16mm dia, MS plate 6mm thick size 230x230mm, complete, all as specified and directed by Engr-in-Charge.

Dismantling cross-arms of M.S. channel or angle sections etc complete all as specified and directed .

Supplying & fixing in replacement of Cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated & including two coat of Aluminium paint over one coat of red oxide including taking down complete all as specified and directed .

Dismantling insulators any type, any size complete all as specified and as directed by the Engineer-in-Charge.

Supplying & fixing in replacement of pin insulator porcelain vitreous, white, brown & green incl. One galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height 65mm dia for 1100 volts grade, complete, all as specified and directed.

Supplying & fixing in replacement of shackle type porcelain, vitreous , white, brown or green insulator including galvanised mild steel straps washers insulator bolts, washer and nuts of size 100 mm height, 115mm dia for working pressure 1100 volts, complete, all as specified and directed.

S&F Loop type insulator, vitreous porcelain white , brown, green small size with overall dimensions 65mm x 90mm clearance of hole 16mm, complete, all as specified and directed.

S&F in replacement of Galvanized stay strand, size 7/2.24 mm, incl taking down the old unserviceable stay wire, complete, all as specified and directed.

Taking down street/security/Gate light fittings LED/HPSV/CFL light fittings of any capacity or type from pole/wall after disconnection and connecting wires, carrying out to store yard for necessary repair/replacement of spares and fittings etc.,complete, all as specified and directed.

Refixing only street light fittings any type or capacity (Item obtained from Srl No.59.00 after repair) including making connections with cables and testing, complete, all as specified and directed. Note:- Cable required for replacement shall be measured and paid for separately.

Supply and fixing in replacement of post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

Supply and fixing inreplacement of Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.

Supplying & fixing in replacement of street light fitting GI bracket made out of 40mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall complete, all as specified and directed.

Supplying & fixing in replacement of clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer, complete, all as specified and directed.

S&F Steel water tubing, light grade, galvanised (ISI marked), 80 mm bore with all fittings, laid in trenches/ under roads or fixed to poles for passing cables for protection of cables, complete, all as specified and directed.

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 25 Sqmm 3.5 core, complete, all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 25 Sqmm 4 core, complete, all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core, complete, all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 10 Sqmm 2 core, complete, all as specified and directed.

Streching of loose ACSR conductor including jumpering, binding,etc all as required in LT OH line, complete, all as directed. Note:- Disconnecting the existing security light or cable connection before stringing and reconnecting after stringing is included in the rates quoted.

Dismantling earth wire or copper conductor, service feeder or distributor span complete all as specified and as directed by the Engineer-in-Charge.

Supplying & fixing in replacement of GI wire as earth wire of size 4mm dia as required at site complete all specified and directed.

Supplying & fixing in replacement of connection/Junction box made out of 1.6mm thick MS sheet front openable, weather & vermin proof including painting two coats of synthetic enamel paint over a coat of red primer. Connection box shall be suitable for housing & including aluminium bus bar 25 Amps cap - 2 Nos, MCB SP 6 Amps- 01 No and having provision of cable hole in bottom for two to three cables of size 16 Sqmm 4 core armoured cable connection box shall be fitted on street light pole and fixing arrangements i.e. MS clamps etc deemed to be provided by the contractor, size of box - 200 x 150 x 100mm, complete, all as directed.

Supplying & fixing in replacement of double walled corrugated HDPE duct pipe of 63 mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittinggs for cable protection complete all as specified and direcetd.

Supplying & fixing in replacement of non metallic rigid PVC conduit medium grade 20 mm dia ISI marked to be fixed on pole with all fittings including mouth pieces for passing of sub main wiring, complete, all as directed.

M&L Cable PVC insulated PVC unsheathed un-armoured copper conductor (multi stranded) of cross sectional area 2.5 sqmm 2 core all as required for connections to light fittings, complete, all as directed.

Dismantling steel poles/struts, any size complete and setting aside for re-use within 50m complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement of Steel tubular swaged poles complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified type 410 SP-31 9.0 mtr long duly painted with two coats of aluminium pait over a coat of red oxide primer complete, all as specified and directed.. Note- Excavation, earth work and PCC shall be measured and paid separately.

M&L for Painting of steel tubular pole 9.0 metre long, by applying two coat of aluminium paint after scraping / brushing and cleaning the rust on pole and cross arms. Aluminium painting will be done on pole above 1.5 metre height from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enameled paint (30 Cms each). Pole Nos will be written on pole by black paint in yellow circle of 150mm dia, complete, all as specified and directed. Note:- Only one coat will be applied at one time and payment at 50% of coated rate to be applied at the first time of first coat. Second coat is to be done more than 30 days after first coat.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundations, laying of pipes etc and not exceeding 10Sqm on plan for manholes etc and not exceeding 1.5 metre in depth and getting out in any type of soil, complete, all as specified and directed.

Returning filling in with approved excavated soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed.

Removing excavated material (soils) to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete, all as specified and directed.

Supply and laying Sub Class 'B' common burnt bricks, old size, designated 75, laid dry, flat with width equal to length of brick & with gaps between the adjucent bricks not exceeding 10mm as cover laid over the cable to give mechanical protection to under ground cable, complete, all as specified and directed.

Supply and lay Dry sand cushioning to under ground electric cable on layer of 8cm thick before laying the cable and second layer of 15cm thick after laying the cable, complete, all as specified in clause 19.75 of M.E.S Schedule Part-I (2009) and directed.

Earthing with Galvanised iron earth plate electrode 600mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL, connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm bore medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No 3 of MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:2:4 type B1 reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm bore GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.

Supply and fix in replacement of Sheet metal enclosure including fiiting on wall including and making the connection with MCCB 4 Pole 100 Amps 16 KA, 415 volts , 50 Hz ,thimble/lugs, aslo including all nuts bolts required for fixing all as specified and directed by Engineer - in - Charge.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 630 Amps 50 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 400 Amps 36 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 350 Amps 36 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 250 Amps 36 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 200 Amps 36 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 160 Amps 36 KA capacity AC 415 v complete all as specified and directed.

Supply and fix in replacement of fixed thermal & fixed magnetic type MCCB 4 pole 125 Amps 16 KA capacity AC 415 v complete all as specified and directed.

M&L L.T. lightning arresters for outdoor use, non-liner resistor type, horn gap and choking coil, maximum working pressure 1100 volts including dismantling and taking down old arrestors complete all as directed.

M&L PVC spacer suitable for 3 wire LTOH line including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

M&L PVC spacer suitable for 4 wire LTOH line including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

M&L PVC spacer suitable for 5 wire LTOH line including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

M&L PVC spacer suitable for 6 wire LTOH line including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Material and labour of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat/cold Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size185 to 240 sqmm,Indoor/Outdoor type including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat/cold Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size120 to150 sqmm,Indoor/Outdoor type including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat/cold Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 70 to 95 sqmm,Indoor/Outdoor type including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat/cold Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type including taking down of old one complete all as specified and as directed by the Engineer-in-Charge.

Pruning of tree branches and making clear LT line to the minimum distace of 1.8 mtrs all arround complete all as specified and as directed by the Engineer-in-Charge.

For 3/4 conductors complete all as specified and as directed by the Engineer-in-Charge.

For 5/6 conductors complete all as specified and as directed by the Engineer-in-Charge.

M & Laying cement concrete for foundation fillings and mass conctere type D2 1:4:8 ( 40 mm graded aggregate ) complete all as specified and directed.

M&L for PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of pole, stay incl frame work where reqd all as specefied and directed.

M & Laying cement concrete for copying of poles type B1, 1:2:4 (20 mm graded crused stone aggregate) ,smooth finishing without using extra cement complete all as specified and directed. .

Amount of credit of Rs. 50828.72 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Rajesh Agencies

Vishal Builder