Maintainence Works to Corporation School Part Building Covert to Temporary UPHC at Sundarajapuram in Ward No.75.

Amount

Dismantling the Existing Brick wall in Cement Mortor under 3 M Height and Carefully away from the site etc Complete

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Plastering with CM1:5(one cement and five sand) 12mm thick 10m2.

Supplying and Fixing Cuddapah Slab 20/40 mm Thick init Position and Neat Finishing Etc Completer

Supplying and filing in foundation and basement with Quarry Dust in layers of 15 cm thick well rammed and consolidation including watering complying with Std specification etc.

Plain cement concrete in 1:4:8 (one cement four sand and eight aggregates) with 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc., complete.

Plain Cement concrete 1: 1 ½ : 3 (One cement one and half sand and three aggregates) with 20mm gauge machine broken gauge hard broken granite chips including curing and finishing etc., complete for R.C.C. item excluding the cost of reinforcement grills in position and centering shuttering etc.

Wiring with 2 x 2.50 sqm PVC unheated SC. Copper cable of 1100V grade in suitable PVC regid pipe in wall on celling with PVC accessories with T.W. switch box in flush with wall covered with hylum sheet 3mm thick with painting of suitable colour with 14 SWG T.C. wire using for light point and fuse point.

Wiring with 2 x 2.50 sqm PVC unheated SC. Copper cable of 1100V grade in suitable PVC regid pipe in wall on celling with PVC accessories with T.W. switch box in flush with wall covered with hylum sheet 3mm thick with painting of suitable colour with 14 SWG T.C. wire using for Plug Point

Supply and fixing of single box type 4.40W flu. Fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fittings.

Supptying and fixing in position white / colour glazed Indian Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with Cl pipe of 100mm dia / PVC pipe of 110 mm dia, double flapped rigid PVC black seat and seat cover wilh CP brass hinges including cost of while cement, @ment for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC I 12.5 lilets capacity porcelin low level flushing tank with a pair of Cl brackets, etc., complete with all fittings such as 'lsmm brass ball valve with polythene float wilh brass handle, union, coupling connected by means of 40mm white PVC flush hand using lndian adopter joint including all internal fittings.

Supplying and fabrication and fixing in position of anodised natural colourm att finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gut ter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading .Aluminium clips, rubber beading, handle and fixing 4mm thick clear sheet glass including all required for fabrication etc.,complete.Necessary dismantling making holes in RCCcolumns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specificationforan Only Labour Charges

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bar setc. conforming to IS specification including primer coating and enamal painting asper Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of prepainted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base prepainted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws tobe fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120GSM paint thickness the finish should be terracotta finish like malabar mangalore tiles finish optional matt finish. The sheet tobe fixed with making suitable corrugated, cutting the sheet into there quired ssize and making ornamental designs asper the site condition and as directed by the departmental officers.

Add GST 18%

BAVITHRA BUILDERS (BID ID -1561510)