REPAIR/REPLACEMENT OF JOINERY, ROLLING SHUTTER AND OTHER CONNECTED B/R WORKS AT 8FBSU, AF

Amount

Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion, complete all as specified & directed.

All as per Srl Item No.1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm (without taking off shutters from the frames) and making good disturbed portion, complete all as specified & directed.

Taking down shutters of any description area not exc 1.00 Sqm each all as specified & directed.

Taking down shutters of any description area exc 1.00 sqm and not exc 2..00 Sqm each all as specified & directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified & directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) including demolition of old u/s brickwork built in cement mortar, complete all as specified & directed.

Rendering 15mm thick cement plaster in cement mortar (1:4) on brick or concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified & directed.

Preparation of new plastered/unplastered surfaces on walls and applying two coats of oil distemper over a coat of chalk whiting, complete all as specified & directed.

Welding in repairs of old/broken steel windows/door shutter exc 2.50 cm but n. exc. 5.00 cm in length and thickness of metal exc 6mm but n.exc 9mm, complete all as specified & directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheets, all as per specification & drawing.

S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete all as specified & directed.

S&F of 2nd class hard wood 35mm thick glazed and skeleton shutters for doors, open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified & directed.

S&F of 2nd class hard wood 35mm thick, plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

S&F of 2nd class hard wood 30mm thick glazed & skeleton shutters for windows , open rebated & prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as spd in SSR part-1 sec 8 clause 8.24(b) supplied and fitted to chowkats, complete all as specified & directed.

S&F of 2nd class hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed

S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed by the Engineer-in-Charge .

PCC 1:3:6 type C-0 (using 12.5mm graded crush stone agg) in back filling of pressed steel door frame and bed block for hold fast complete.

Providing, cement concrete 1 : 2 : 4 type B-1 using 20 mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Supply and fixing Butt hinges, (ISI Marked), medium weight, cold rolled, mild steel, of size 100mm long all as specified & directed.

Supply and fixing Butt hinges, (ISI Marked), aluminium alloy with galvanised mild steel, of size 100mm long all as specified & directed.

Supply and fixing Butt hinges, (ISI Marked), medium weight, cold rolled, mild steel, of size 75 mm long all as specified & directed.

Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom all as specified

Supply and fixing floor door stopper of aluminium alloy of overall length of cover plate 140mmm and tongue, anodised, with hard drawn steel spring, fixed on door all as specified & directed.

S&F Factory made Steel windows or ventilators side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete, with glazing bars, dovetailed or welded type of 'Z' Section comprising double frame for gauged and glazed skelton shutter jointed internally with flat iron 40x4 mm complete all as specified and directed by Engr-in-Charge.

Aluminium alloy, anodised, sliding door bolt (ISI Marked) 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F Aluminium anodised, barrel tower bolts of size 200mm extruded section and fixed all as specified & directed

S&F Aluminium anodised, barrel tower bolts of size 150mm extruded section and fixed all as specified & directed

S&F Aluminium handles, cast type, anodised of size 150 mm all as specified & directed.

S&F Aluminium handles, cast type, anodised of size 125 mm all as specified & directed.

S&F of mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repairs all as specified and directed.

3mm thick sheet glass, ordinary type and glazing with oil putty or fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

3mm thick sheet glass, ordinary type and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each paneincluding hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

3mm thick sheet glass, figured glass, pin head type and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each paneincluding hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

S&F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed.

S&F of door closer cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F Anodised aluminium frame for doors,windows and ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified.

Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 kg/RM including fixed with alumnium beading, silicon lining and gaskets,necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 1.10kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Taking down aluminium shutter n. exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured seperately as supply and fix.

Taking down aluminium shutter exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured seperately as supply and fix.

4.8 mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of not exe 0.5 sqm in each pane all as specified and directed.

4.8 mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of exe 0.5 sqm in each pane all as specified and directed.

M&L for 12 mm prelaminated particle board both side decorative, fixed with aluminium beading and rubber neoprene packing to aluminium frame.

S&F for rubber neoprene packing complete all as specified and as directed.

S&F for anodised aluminium snap on beading/tapper clip for fixing the glass or particle board complete all as specified and as directed.

S&F for 150 mm stainless steel butt hinges complete all as specified and as directed.

S&F in repair brass 4-levers Mortice lock, verticle type, size 100mm for aluminium door complete all as specified and as directed.

Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets on any description, any thickness, including cover fillets.

S & F Gypsum board 12 mm thick in ceiling fixed with screw as per manufactureres instruction or in metal framework,complete all as specified.

M&L for prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with all around 6mm thick teak wood beading as in false ceiling ,cup board shutters, shelves,palmet boxes etc, fixed to timber frame complete all as specified.

M&L for prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with all around 6mm thick teak wood beading as in cup board shutters, shelves,palmet boxes etc, fixed to timber frame complete all as specified

S&F PVC SHEET WALL PANELLING of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The strips should be two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement, complete all as specified and directed. (Note:- Including all nesscesary fittings and scafolding for heighted site)

Preparation of new or previously untreated surfaces of Steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified & directed.

Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coat of synthetic enamel paint over one coat of pink primer, complete all as specified & directed.

S&F 30mm wide flap contineous piano hinges MS bright finish, complete all as specified & directed.

S&F 50mm dia cupboard knobs of MS fixed with nuts, screws and washers, complete all as specified & directed.

Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified & directed.

Supply and fixing 75 mm long hasp and staples safety type aluminum anodized with hinge pin including bolts, complete all as specified & directed by Engineer-in-Charge.

S&F Steel rolling shutters thickness of lath 1.25mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified & directed by Engineer-in-Charge.

Ditto all as per ser item No 61 but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-Chagre.

Taking down metal rolling shutter manually operated of any size each including refixing in the same position after carrying out the repair inluding welding of any defective parts and oiling and greasing etc to all moving parts tensioning to spring to make proper functioning of the shutter complete all as spd and directed by Engineer-incharge ( replacement of defective parts shall be paid seperately under separate items here-in-before). repaired shutter shall be firmly secured in walls /columns all as directed by Engineer-in-Charge.

All as per item above but gear operated of any size each, complete all as specified and directed by Engineer-in-charge.

M &L for replacement of bevel gear with crank handle of rolling shutter, complete all as specified & directed by Engineer-in-Charge.

M & L for replacement of worn out shaft of gear operated type rolling shutter, complete all as specified & directed by Engineer-in-Charge.

M & L for replacement of old tension spring with new tension spring of size exc 300 mm and not exc 450 mm (size of shutters not exc 10 sqm), complete all as specified & directed by Engineer-in-Charge.

All as per item above but size of tension spring exc 450 but not exc 600mm ( size of shutter exc10sqm but not exc 25sqm), complete all as specified & directed by Engineer-in-Charge.

M & L for replacement of certain laths of size 50x1.25mm thick interlocking laths section, complete all as specified & directed by Engineer-in-Charge.

M & L for replacement of 1.60mm thick black sheet steel guide channel of any depth 65/75mm with suitable holes for embedding in cement mortar 1:3, complete all as specified & directed by Engineer-in-Charge.

M & L for replacement of worn gear wheel of standard size, complete all as specified & directed by engineer-in-Charge.

M & L for replacement of anchoring rod of 20 or 25mm dia for rolling shutters not exc 5m height, complete all as specified & directed.

Taking down hood cover for rolling shutters exc 10 sqm & not exc 25 sqm and refixing in the same position after doing necessary repair i.e. straighting etc., complete all as specified & directed.

M&L for ball bearing for rolling shutters, complete all as specified & directed.

M&L for safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified & directed.

Note :- An amount of Rs. 76,750.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

nazir Ahmad Dar and sons (BID ID -3345414)

M/S MIR SAJAD ENTERPRISES (BID ID -3347479)

M/S BASHIR AHMAD AND SONS (BID ID -3346458)

M/S GEE EMM MIR (BID ID -3345022)

M/s Gh Qadir and Sons (BID ID -3340422)