Installation of zinc sheet on the roof of the building of Anganwadi Center No. 61 in Hesarur village and repair of windows and doors and repair of toilets

Installation of zinc sheet on the roof of the building of Anganwadi Center No. 61 in Hesarur village and repair of windows and doors and repair of toilets

Dismantling precast concrete or stone slabs in walls, partition walls etc including stacking to the appropriate disposal area as per direction of Engineer-in-charge 19.39.1 Thickness up to 40 mm

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approve...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L. hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of approv...