PERIODICAL SERVICES TO INTERNAL AND EXTERNAL SURFACES OF CERTAIN BUILDINGS AT OLD RS COLABA UNDER AGE BR II NW NAVY NAGAR

Amount

Complete removal of existing treatment on wall/roof projection including facia cornices etc by scrapping with mechanical sander ( having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean , free from dust, loose paint etc by skilled labour complete all as specified and directed

Complete removal of existing treatment on ceiling projection including facia cornices etc by scrapping with mechanical sander ( having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean , free from dust, loose paint etc by skilled labour complete all as specified and directed

Material and labour for applying two coats of oil bound distemper in ceiling using fullly automatic airless spray machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and penetration of distemper on the surface complete all as specified and directed. Note : sanding of surface to be done by mechanical sander with 1500-2700 rpm with iinternal dust extraction system for clean environment certified by paint manufacturer . Proper masking to be carried out before paint application. Note: Work will be executed by authorised applicator of approved manufacturer.

Material and labour for waterproof cement based putty @ 1kg (undiluted ) per sqm mtr of average thickness 1 mm over the plastered /old painted wall after scrapping to prepare the surface even or smooth complete and sanding of the putty surface with mechanical wall sander ( having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps. 1.) Mix the putty powder by adding water per manufacture instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2.) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with maximum pressure 3300PSI . Step 3 ) Allow 6-8 hrs time to dry the putty surface . Note: Work will be executed by authorised applicator of approved manufacturer.

Material and labour for applying two coat of oil bound distemper on wall using fullly automatic airless spray machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and penetration of distemper on the surface complete all as specified and directed. Note : sanding of surface to be done by mechanical sander with 1500-2700 rpm with iinternal dust extraction system for clean environment certified by paint manufacturer . Proper masking to be carried out before paint application. Note: Work will be executed by authorised applicator of approved manufacturer.

Material and labour for applying one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and labour for applying two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.Note: Work will be executed by authorised applicator of approved manufacturer.

Taking down cement plaster of any description in patches n.exc 4 Sqm each on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of wall and finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified.

M & L for rendering 20mm thick in two coats(15mm inner coat in cm (1:6) + 5mm finishing coat in cm (1:4)) on fair faces of brick work or concrete surfaces mixed with integral water proofing compound @2% by weight of cement in finishing coat and finished fair and even including necessary scaffolding and safety arrangement complete all as specified and directed by Engr-in-Charge. Note- Water proofing compound willl be measured and paid for separately.

Supply only integral water proofing compound .

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastererd surfaces of wall complete all as specified and directed by Engr-in-Charge.

Material & Labour for preparation of new plastered surfaces of wall and applying wall one coat of wall care putty not less than 1.5mm thickness and making the surface even and smooth using emery paper and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Material & Labour for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified .

Material & Labour for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of antirush primer complete all as specified.

Material & Labour for preparation of old decorated surfaces of wall , filling the holes, fine cracks with wall care putty and applying one coat of oil bound distemper complete all as specified.

Material & Labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified.

Ditto- all as per item No 19.00 above but on ceiling.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour granite (of any type) slab 18 to 20mmthick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform etc.

Material & Labour for 18- 20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including mirror polishing complete all as specified.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each.

Taking down shutters of any description exc 2 sqm each.

Supply & Fixing 35 mm thick factory made shutter second class hard wood (Sal) glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing glass, gauge etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

Supply & Fixing 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

Supply & Fixing Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size) or aluminium wire staples complete all as specified and directed.

Supply & Fixing 150 mm extruded aluminium handles, fabricated type anodised ISI marked complete all as specified.

Supply & Fixing 150mm aluminium anodised barrel tower bolts of extruded section ISI marked complete all as specified.

Supply & Fixing 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified.

Supply & Fixing 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor ISI marked complete all as specified.

Supply & Fixing 100mm size stainless steel medium weight butt hinges ISI marked complete all as specified.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes, bends, swan necks etc of any dia complete all as specified and directed.

Supply & Fixing CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Ditto- all as per item 35.00 above but except pipe.

Supply & Fixing CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Ditto- all as per item 37.00 above but except pipe.

S&F 100 mm bore cast iron bends (any radius) fixed to CI soil , waste or vent pipe and jointing with cement mortar complete all as specified.

S&F 75mm bore cast iron bends (any radius) fixed to CI soil , waste or vent pipe and jointing with cement mortar complete all as specified.

S&F 100mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and jointing with cement mortar complete all as specified.

S&F 75mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and jointing with cement mortar complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to Fe.290.Gde-E-165 complete all as specified

M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris out side the premises etc complete all as specified and directed by Engr-in-Charge. (Hard concrete should not be removed by force.)

Material & Labour for clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTMB-117 on the existing reinforcements for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 1 hrs and wipe it dry complete all as specified and directed

Material & Labour for providing and fixing additional mild steel CRS TMT bars of diameter, cut to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, in various structural elements like columns, beams and foundations including drilling, bending and fixing the bars with epoxy putty etc complete all as specified and directed by Engr-in-Charge.

Material & Labour for applying two coats of anticorrosive Treatment to Reinforcement by application of full and unbroken coating of anticorrosive protective zinc rich epoxy coating on exposed reinforcement in two coats with time interval of minimum 1 hours between each coat including mixing of both components by weight as per manufacturer's specifications, brush application, curing to form a anticorrosive protective coating with high mechanical strength to cementitious repair works, etc complete all as specified and directed

Material & Labour for providing and applying structural grade EPIBOND-21-LP or techno-commercial equivalent prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and directed by Engr-in-Charge.

Material & Labour for providing and applying jacketing around columns, beams, slabs, chajjas etc with Micro concrete (molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and directed by Engr-in-Charge.

Material & Labour for Plain aluminium sheeting 0.56 mm thick fixed in crumple section complete all as specified.

Material & Labour for writing letter or figures size as per existing numbering of the building (Block, Roman, Italic or Indian) all as specified and directed by Engr in Charge.

(Note:- (I) Item No 1 to 54 shall be carried out/executed at G+14 bldg including top roof,parapet and shaft walls with scaffolding & safety measures in repairs and in patches). (II) For Ser item No 1 to 07 (a) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding shall be included in the quoted rates. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) The equipments to be used in the work shall be certified by the manufacturer from whom the MOU has been submitted. (g) Contractor shall submit approved company generated 05 years warranty card or more if mentioned specifically at respective item at the time of submission of RAR & Final Bill, without which payment shall not be released"

satguruenterprises

SHREE JAGDISH FURNITURE CO.

RAMESH ENTERPRISES

satyanarayan conastruction

M/s. MAYUR ENTERPRISES

the bhimani group of companies