REPAIR MAINTENANCE TO INTERNAL ELECTRIFICATION INCLUDING FLP FITTING AND OTHER CONNECTED WORKS AT HEMRL UNDER GE RD PASHANPUNE

Amount

Taking down existing unserviceable submain any type wiring alongwith complete accessories at any height and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.

Material and Labour for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 1.5 sq. mm with 1 run of 1.5 sq. mm earth wire drawn through in existing concealed conduit pipe (PVC/MS) at any height as required complete all as specified and directed by Engineer-in-charge.

Material and Labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 2.5 sq. mm with 1 run of 2.5 sq. mm earth wire drawn through in existing conduit pipe (PVC/MS) at any height as required complete all as specified and directed by Engineer-in-charge.

Material and Labour for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 4 runs of 2.5 sq. mm with 1 run of 2.5 sq. mm earth wire drawn through in existing conduit pipe (PVC/MS) at any height as required complete all as specified and directed by Engineer-in-charge.

Material and Labour for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 4 sq. mm with 1 run of 4 sq. mm earth wire drawn through in existing conduit pipe (PVC/MS) at any height as required complete all as specified and directed by Engineer-in-charge.

Material and Labour for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 6 sq. mm with 1 run of 6 sq. mm earth wire drawn through in existing conduit pipe (PVC/MS) at any height as required complete all as specified and directed by Engineer-in-charge. Note:- (i) For item no 1 to 6 except item no 4 Two run of 1.5 / 2.5 /4 / 6 sqmm ( 1 phase and 1 neutral ) with one run earth wire will be measured as one unit. Wiring should be as per approved colour code. (ii) For item No4 : four runs of 2.5 sq. mm with 1 run of 2.5 sq. mm with one earth wire drawn through in existing conduit pipe (PVC/MS) at any height as required complete all as specified and directed

Material and Labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including concealed PVC/MS conduit of size not less than 19mm dia with all fittings and accessories with MS box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc;at any height including one continous run of PVC insulated green colour 1.5 sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly including cutting chasses or making hole for fixing of MS sunken box in wall complete and making good disturbed surface of walls, floors, etc.all as specified and directed forone light /fan point controlled by one way switch.

All as per Ser item 7 above but for one 3 pin socket out let 5 amp on independent point.

All as per Ser item 7 above but for one 3 pin socket out let 5 amp point on the same board with other switches.

All as per Ser item 7 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Material and Labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into existing conduit concealed into wall or on surface with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc.all as specified and directed for one light /fan point controlled by one; one way switch.

All as per Ser item 11 above but for Two light point controlled by one; one way switch.

All as per Ser item 11 above but for one fan / exhaust fan point controlled by one; one way switch.

All as per Ser item 11 above but for one 3 pin socket out let 5 amp on independent point

All as per Ser item 11 above but for one 3 pin socket out let 5 amp point on the same board with other switches.

All as per Ser item 11 above but for one light point controlled by two; two way switch for staircase

All as per sl item 11 above but with 2.5 sq mm size PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Taking down copper/aluminium point wiring casing & caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down copper/aluminium point wiring PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down copper/aluminium point wiring except PVC conduit / Steel conduit pipe (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down flameproof switch socket combination single phase / three phase complete all as directed and making good disturbed surface of walls, floors, etc.

Material and Labour for taking down carefully ceiling fan 1200 / 1400 mm sweep at any height including fan blades, down rod for cleaning dust, removing cavties and painting with white synthetic enamel paint by spray paint and pasting soft stickers indicating MES No of 25 mm size each letter with black synthetic enamel paint and making good disturbed surface of walls, floors, etc including re-fixing of fan in its original position complete all as specified and directed by Engr-in-charge.

Material and Labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including surface PVC casing caping of suitable size with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; at any height including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc. complete all as specified and directed for one light point controlled by one; one way switch.

All as per Ser item 23 above but for one fan / exhaust fan point controlled by one; one way switch.

All as per Ser item 23 above but for one 3 pin socket out let 5 amp on independent point.

All as per Ser item 23 above but for one 3 pin socket out let 5 amp point on the same board with other switches.

All as per Ser item 23 above but for one bell / buzzer point controlled by one; one way switch.

All as per Ser no item 23 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Supply and fix in repairs Flameproof switch of LM 6 body, rotary switch, SP, 16 Amps for ON / OFF light / fan point to operate on single phase 230 Volts, AC CMRI certified IS-2145.complete all as specified and directed Make Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga

Supply and fix in repairs flameproof switch socket combination suitable for 2P+E 16 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge Make:- Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga

Supply and fix in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 90 Watt with lumen out put not less than 9000 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistar including suitable electronic including necessary fixing arrangments at any height and connecting up completely all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed. Make:- Shyaam Switchgear Cat no SSPL/1251 / Flexpro / Baliga. Note:- Fitting to be fitted at height upto 20 mtrs.The contractors shall make his own arrangment with safety precautions and nothing extra shall be admissible on this account.

Supply and fix in repairs flameproof switch socket combination 2P+E suitable for 25 Amps to 32 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge.Make:- Shyaam Switchgear / Flexpro / Baliga

Supply and fix in repairs FLP flexible metalic hose conduit 20 mm dia 300 mm long complete all as specified and directed. Make:- Shyaam Switchgear / Flexpro / Baliga

Supply and fix in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 45 Watt with lumen out put not less than 4500 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistarincluding suitable electronic including necessary fixing arrangments at any height and connecting up completely all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed. Make:- Shyaam Switchgear Cat no SSPL/1233 / Flexpro / Baliga Note:- Fitting to be fitted at height upto 20 mtrs.The contractors shall make his own arrangment with safety precautions and nothing extra shall be admissible on this account

Supply and fix in Switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

Supply and fix Socket outlet 3 pin, 16 Amp, flush type complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 Amp, flush type complete all as specified and directed.

Supply and fix switch socket combination 5 in 1, 6 pin, 5A/16A flush type complete all as specified and directed.

Supply and fix Ceiling rose surface Bakelite, 65x50mm three terminals 230 Volts, AC Single phase complete all as specified and directed.

Supply and fix in stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 6A,1 module complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 16A,1 module complete all as specified and directed.

Supply and fix in repair Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair Modular Bell push 6A 1 module complete all as specified and directed.

Supply and fix in repair Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,1 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,2 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,3 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,4 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,6 module complete all as specified and directed.

Supply and fix in repair White cover plate with frame,12 module complete all as specified and directed.

Supply and fix in repair Modular Metal flush box 1/2 module complete all as specified and directed.

Supply and fix in repair Modular Metal flush box 3 module complete all as specified and directed.

Supply and fix in repair Modular Metal flush box 4 module complete all as specified and directed

Supply and fix in repair Modular Metal flush box 6 module complete all as specified and directed

Supply and fix in repair Modular Metal flush box 12 module complete all as specified and directed

Supply and fix Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and directed

Supply and fix in repairs LED light fitting 20 W (4 feet) extruded aluminium heat sink provided for efficient heat dissipation and integrated and interchangeable integrated electronic driver luminaries LED as light source housing complete with all accessories including suitable lamp including pre wire and including up with twin core twisted flexible copper cable of suitable size all as per specified and as directed by Engr-in-charge. Make:- Havells Cat No LUMILINE+BS20WLED865SPCSS / Crompton/ Phillips

Supply and fix in repairs energy saving and environmental friendly long life LED street light 40 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10 kV Built-in Surge Protection Device. complete all accessories as per directed by Engr-in-charge . Make:-Havells Cat no-ENDURASUNDOWNSL40WLED765PASYBOPC/ Crompton / Philips

Supply and fix in repairs Suitable shape and size street light fitting bracket made out of GI Pipe 40 mm dia light grade as per requirement with, 02 nos of clamps made out from MS flat of size 40 mm x 6 mm with nuts and bolts (length of pipe should not less than 1.5 m ) complete all as specified and directed by Engr-in-charge.

Dismantling carefully disconnecting and bringing down the existing unserviceable flame proof tube light fittings, 1 x 40 / 36 watt / 2 x 40 / 36 W of any type from wall/ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including holders etc., at any height and refixing to the position all as specified and directed by Engineer-in-Charge. Notes : (i) Spare parts replaced will be measured and paid seperatly as "supply only"

Taking down flameproof well glass fittings 70 / 125 / 250 W HPMV / HPSV / 160W MLL of any type and from wall/ceilings at any height for modification to bring energy conservation concept by replacement of suitable type holders and LED retrofit type bulb 30/40 watts directly connected to the system and fixing back in postion after modofication complete all as specified and as directed. . Note : LED bulb 30/40 watts & holder will be measured sepaterly as supply only

Dismantling carefully disconnecting and bringing down the existing unserviceable tube light fittings, 1 x 40 / 36 / 28 watt / 2 x 40 / 36 / 28 W o of any type and from wall/ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including holders etc., at any height and refixing to the position all as specified and directed by Engineer-in-Charge.Notes : (i) Spare parts replaced will be measured and paid seperatly as "supply only"

Supply only LED retrofit lamp screw/pin type 30 watts to be incorporated in flame proof HPMV fittings complete all as specified and directed.

Supply only LED retrofit lamp screw/pin type 40 watts to be incorporated in flame proof HPMV fittings complete all as specified and directed.

Supply only LED retrofit tube light 20 W crystal glass one side connecion suitable for installation in existing T8 tubelight with G13 lamp holder complete all as specified and directed.

Supply only Porceline Holder suitable for 30/48 watt well glass fitting complete all as specified and directed.

Material and labour for taking down carefully ceiling fans / normal / FLP wall mounted fans / FLP pedestal fans / normal/FLP exhaust fans of any sweep /size from location of any height after disconnecting from the live line,transpotation the same from site to workshop for repair including dismantling of the fan blades,motor,brackets for repairs and reassembling it complete after overhaulling oiling including greasing after replacing unserviceable parts and refixing at original location including painting with one coat of synthetic enamel paint of white colour or any approved colour after cleaning the fan surfaces and testing at site all as directed by engr-in-Charge. Notes : (i) Spare parts replaced except minor items will be measured and paid sepaterly as "Supply only". (ii) Painting of ceiling fans /exhaust fans will be measured separately. (iii) Rewinding of ceiling fans/exhaust fans will be measured and paid separately.

Material and Labour for rewinding of ceiling fans 1200 to 1400 mm sweep /wall mountedfans/pedestal fans of any size removed under Sl item No 30.0 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC solution to remove the burnt slots.Rewinding the same with super enameled copper wire of suitable gauge and size / number of turns including insulation varnishing and reassembling complete all as specified and directed.

All as per Sl item No 71 above but exhaust fan size 350 to 450 mm sweep any type /make.

All as per Sl item No 71 above but exhaust fan size upto 300 mm sweep any type /make.

Supply only Flexible twin twisted copper wire two core of size 23 / 0.0076 mm upto 1.5 mtr length complete all as specified and directed.

Supply only Ball bearing suitable for Ceiling fan 1200/1400 mm sweep complete all as specified and directed.

Supply only Ball bearing suitable for exhaust fan 350-450 mm sweep complete all as specified and directed.

Supply only Ball bearing suitable for exhaust fan upto300mm sweepcomplete all as specified and directed.

Supply only Condensor 2.5 mfd, 230 V, suitable for ceiling fan / wall fan / exhaust fan of any sweep and size complete all as specified and directed.

Supply only Condensor 4 mfd, 230 V suitable for wall mounting fan / exhaust fan / pedestalfan of any sweep / size complete all as specified and directed.

Supply only Rubber reel with MS nuts and bolts with appropriate size locking pins suitable for ceiling fan down rod of any size / dia as per requirment at site and to be fixed in position complete all as specified and directed.

Supply only PVC canopy top or bottom complete for ceiling fans down rod suitable for any size / sweep and any make complete all as specified and directed.

Supply only Gun metal bushing for ceiling fan 1200 / 1400 mm sweep any make complete all as specified and directed.

Supply only Gun metal bushing for Exhaust fan upto 300 mm sweep any make complete all as specified and directed.

Supply only Gun metal bushing for Exhaust fan upto 450 mm sweep any make complete all as specified and directed.

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including cutting hole of suitable dia for fixing of exhaust fan and making good to the disturbed surfaces to match with the existing complete all as specified and directed by Engineer-in-Charge Make:- Havells Model Ventil Air DX / DX-HS White / Bajaj / Crompton

Supply and fix in repairs Surface mounted LED downlighter 15 W with white powder coated aluminium housing with integrated electronic driver complete all as specified and directed by Engr-in-charge. Make:- Havells. Cat No:-INTEGRANEOSURFACEDLS15WLED857S / Philips / Crompton

Taking down the existing unserviceable wall mounted fan of any sweep deposited to MES store, Supply and fix wall mounted fan 400 mm sweep ,1350 RPM , suitable for operation on AC 220/230 volts single phase ,50 hz supply oscillating type complete including necessary grouting of bolts etc ,complete all as specified and directed Make : Havells / Crompton/ Usha /Orient

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan of size 300 mm sweep , heavy duty with louvers single phase 240 volt with louvers complete all as specified and directed by Engineer-in-Charge Make:- Havells Model Turbo Force SP/ Bajaj / Crompton

Taking down the existing unserviceable FLP exhaust fan of any sweep deposited to MES store and Supply and fix FLP Exhaust fan of size 380 mm with louvers single phase 240 volt , 0.5 HP, 1414 RPM complete all as specified and directed Make:- Shyaam Switchgear Cat Part No SSPL/MT/140 / Flexpro / Baliga

Taking down the existing unserviceable ceiling fan of any sweep deposited to MES store and Supply and fix ceiling fan, AC single phase 230/240 V of size 1200 mm sweep BLDC with three blade, down rod,induction motor accessories 32 watt white colour complete all as specified and directed. Make:- Havells /Crompton /Orient

Supply and fix in repairs new generation, post top , energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source 25 W complete all as specified and as directed.Make: RUBYPT25WLED757PSYMTOPC of Havells / Crompton Greaves / Wipro

Supply and fix in repairs Stellar LED post-top 40 W IP 66 and IK 08 rating including pre wire and including up with twin core twisted flexible copper cable of suitable sizecomplete all as specified and as directed.Make: NEBULAPT40WLED857PSYMTOPC of Havells / Crompton Greaves / Wipro

Supply and fix in repairs LED tube light fitting 1X20 W, 4 feet long wall mounted anodized aluminum extruded heat shrink provided for efficient heat deception and interchangeable integrated electronic driver luminaries LED as light sources housing complete with and including all accessories including suitable lamp, internally prewired up with twin core twisted flexible copper cable of suitable size complete all as specified and directed. Make : Cat No. LUMILINE+BS20WLED865SPCWH of Havells or techno commercial equivalent in Wipro/ Philips/Crompton

Supply and fix in repairs LED tube light fitting 1X10 W, 2 feet long wall mounted anodized aluminum extruded heat shrink provided for efficient heat deception and interchangeable integrated electronic driver luminaries LED as light sources housing complete with and including all accessories including suitable lamp, internally prewired up with twin core twisted flexible copper cable of suitable size complete all as specified and directed. Make : Cat No. LUMILINE+BS10WLED865SPCSS of Havells or techno commercial equivalent in Wipro/ Philips

Supply and fix ,in repairs connecting and testing MCB SP 6 to 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed.Make:-Legrand / L&T /Havells/C&S

Supply and fix ,in repairs connecting and testing MCB SPN 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed.Make:-Legrand / L&T /Havells/C&S

Supply and fix ,in repairs connecting and testing MCB SPN 40 to 63 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed.Make:-Legrand /L&T /Havells/C&S

Supply and fix ,in repairs connecting and testing MCB TP 25 to 63 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed.Make:-Legrand/L&T /Havells/C&S

Supply and fix ,in repairs connecting and testing MCB TPN 16 to 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed.Make:-Legrand / L&T / Havells/C&S

Supply and fix ,in repairs connecting and testing MCB TPN 40 to 100 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete all as specified and as directed. Make:-Legrand / L&T / Havells/C&S

Supply & fix LED 36 W 2'x2' Ultra modern designed LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling at any height complete all as specified and directed. Make:- VENUSNEOHE2X2R36WLED857PIRSENSOR of Havells / Crompton / Philips

Supply and fix Load line distribution Board, TPN vertical, 8 way double door type , fixed on wall semi flush , with incoming MCCB 4 pole 100 Amps ,16 KA, bus-bars, Neutral link, blanking plates complete including cutting chases as per suitable DB size for proper fixing required at site complete all as specified and directed by Engr-in-charge . Note :- MCB's for out goings shall be measured and paid for separately under relevant items.

Supply and fix in repair of MCCB 63 amps 16 KA capacity 4 pole at 415 Votls AC 50 Hz Thermal relesed, adjustable type, conforming to IS- 60947-2 including suitable arrangement to existing LT panel for proper seating/opration complete all as specified and as directed.

Supply and fix in repairs of MCCB 100 amps 16 KA capacity 4 pole at 415 Votls AC 50 Hz Thermal relesed, adjustable type, conforming to IS- 60947-2 including suitable arrangement to existing LT panel for proper seating/opration complete all as specified and as directed.

Supply and fix in repairs LED Luminiors 70 watt energy saving, enviourment freiendly and robust IP65 protected LED midbay with PDC housing suitable for ceiling surface/suspended mounted, heavy duty with clamp and fixing arrangement from ceilings at any height complete all as specified and directed. Note:- Fitting to be fitted at height upto 20 mtrs.The contractors shall make his own arrangment with safety precautions incl T&P,Safe Belt etc and nothing extras shall be admissible on this account.

Supply and fix in repairs 8 way SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete including cutting chases as per suitable DB size for proper fixing required at site withcomplete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 12 way SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete including cutting chases as per suitable DB size for proper fixing required at site with all accessories all as directed by Engineer-in-Charge

Supply and fix in repairs Next generation, energy saving, environment friendly & robust highbay LED 200 watt with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W of make Havells of SAUCERGENXHBP200WLED857PWBBORL or equivalent in wipro/Philips with necessary connection and brackets of suitable complete all as shape specified and directed by Engr-in-Charge. Note:- Fitting to be fitted at height upto 20 mtrs.The contractors shall make his own arrangment with safety precautions incl T&P,Safe Belt etc and nothing extras shall be admissible on this account.

Dismantling/Taking out LT cable PVC insulated PVC sheathed and armoured with multistranded aluminium conductor heavy duty 1100 V grade laid in ducts/ on wall/poles /inside protection pipe of the size upto 185 sqmm 3.5 core complete all as specified and directed.

Laying only existing serviceable cable of LT under ground cable, PVC insulated, PVC sheathed and armoured with multistranded aluminium conductor, heavy duty 1100 Volts grade, on wall/poles or laid in ducts /inside protection pipe of the sizes upto 185 sqmm 3.5 core including cable glands, lugs and suitable sizes of MS saddle, clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and directed. Note:- The cable retrived from site will be used after testing ,jointing for re-laying and connecting to new DB all as per directed by Engr-in-charge.

Supply and fix in repairs PVC FRLS Armoured Copper cable of 1.5 sqmmx 3 core including saddling on wall / surface at any height complete all as specified and directed.

Supply and fix in repairs PVC FRLS Armoured Copper cable of 4 sqmmx 4 core including saddling on wall / surface at any height complete all as specified and directed.

Supply and fix in repairs PVC FRLS Armoured Copper cable of 2.5 sqmmx 3 core including saddling on wall / surface at any height complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 10 sqmmx 4 core including saddling on wall / surface at any height complete all as specified and directed.

Material and labour for special factory made earthing electrode comprising of hot dipped galvanized steel pipe in pipe electrode , outer pipe 76 mm dia medium grade and inner pipe 32 mm dia including testing 3 metre long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm dia holes for nut bolt buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 metre deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with miniumum two nos of GI nut, bolts and connected to test point from earthing pit. The electrode pipes should be filled with 2 x 25 kg bags of carbon based earthing compound. The compound shall be highly conductive , hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with pH value between 7-9 connected to the earthing test point, fibre reinforced plastic pit not less 300 x300 mm with pit cover , including necessary teurning , filling and removal of extra soil complete all as specified and directed. Make : U-PROTEC EARTHING PVT. LTD / Fast Electrode / True Power Note:-(i) GI strip beyond 7.5 metre will be measured and paid separately. (ii) Resistance of earthing should not more than 2 Ohm. Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG user . Test result are to be written in letters of 20 mm height in white colour on black paint back ground . If the desired result not obtained after testing, the contractor should do re-earthing without any extra cost to Govt.

Dismantling carefully, disconnecting and removing all doors of the existing flameproof DB of any size/capacity and removing burn out parts like MCCB / MCB / Copper lugs and connectors etc, carrying out necessary repairs and providing internal wiring with suitable size of copper wire,lugs and connectors etc., painting and refixing in position/same location complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate is deemed to include for wiring, lugs, connectors, paint complete and nothing extra shall be admissible on this account.

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 16-25 Amp. Single phase of any make ,replacing burn out parts without at any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 16-25 Amp. Three phase of any make, replacing burn out parts without at any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge.

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 32-63 Amp. Three phase of any make ,replacing burn out parts without at any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge

Supply and fix in repair flame proof distribution board LM6 material including stainless steel hinges incoming and outgoing termination complete ready to use all as specified and directed. Make:- Shyam switchgear Cat Part No SSPL/RCP/110 / Baliga / Flexpro a) Incomer MCCB 160 Amps 4pole 25 KA- 1 No Adjustable type. b) Outgoing MCB 6 A SP- 6 Nos, MCB 16 A SP-6 nos, MCB 32 A TPN-03 Nos and MCB 63 A TPN-03 Nos.

Supply and fix in repairs industrial grade fully automatic battery charger with DC DB enclosed in the enclosure for substation application operating on 30 V DC @ 30 Amps suitable for charging 30 V / 100-180 AH VRLA battery bank complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs operating handle of size 40 to 50 mm in existing flameproof panel suitable for operating On /OFF for MCB of capacity 63 A to 163 A etc as required at site complete all as specified and directed.

Supply and fix decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. Make:- LHFOAJE1TN1I060 of Havells / Crompton / Philips

Supply and fix new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED BOLLARD 8 W as light source complete all as specified and directed.Make:- Havells Cat Part No BAMBOOBLS8WLED857PSYMTOPC / Crompton / Philips

Supply and fix in repairs sheet metal enclosure suitable for MCCB 250 A in built neutral link for TPN system , IK08 and IP30 protection complete all as specified and directed by Engr-in-charge .

Material and labour for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below normal ground level connected to galvanised strip 32 x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 using 40mm graded stone aggregate chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 using 12.5mm graded stone aggregate chamber cover slab, GI funnel, with GI watering pipe 20 mm dia medium grade, wire mesh, protection pipe 40 mm dia GI pipe light grade for earth lead upto 7.50 metre long including testing salt, charcoal complete all as specified and directed by Engineer-in-Charge. Note : Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 using 40mm graded stone aggregate chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 using 12.5mm graded stone aggregate chamber cover slab, GI funnel, with GI watering pipe 20 mm dia medium grade, wire mesh, protection pipe 40 mm dia GI pipe light grade for earth lead upto 7.50 metre long including testing salt, charcoal complete all as specified and directed by Engineer-in-Charge Note : Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground.

Supply and fix in repairs MCCB 250 Amps 3 pole 415 Volt with breaking capacity 36 KA adjustable thermal type release in existing LT panel / in sheet metal enclosure complete all as specified and directed.Make:- Havells / Legrand / L&T/Schneider/C&S

Supply and fix in repairs change over switch of 250 Amps in sheet metal enclousure complete all as specified and directed. Make:- Havells / Legrand / L&T/HPL/C&S

Supply and fix FLP junction box 4 way 100 mm dia complete all as specified and directed by Engr-in-charge. Make:- Shyam Switchgear Cat no SSPL/JB/105 / Baliga/ Flexpro

Supply and fix FLP double compression gland of suitable size of 18 mm dia complete all as specified and directed by Engr-in-charge

Supply and fix FLP double compression gland of suitable size of 23 mm dia complete all as specified and directed by Engr-in-charge

Supply and fix in repairs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 63 amps 415 volts complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair flameproof switch socket combination suitable for 4P+E 32 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge.Make:- Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga

Supply and fix in repair flameproof switch socket combination suitable for 4P+E 63 Amps, TPN, 415 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge Make:- Shyaam Switchgear Cat no SSPL/MCDB/186 / Flexpro / Baliga

Supply & fix LED 36 W 2'x 2' flat panel for surface mounting luminaire with high brightness complete with fixing arrangement from ceilings at any height all as specified and directed by Engr-in-charge. Make:- Havells Cat No PLANOSURFACE2X2PLS36WLED857S / Crompton/ Phillips

Supply, fixing & testing of new sheet metal enclosure distribution board SPN 4 way double door type including making good to the diturbed surface complete all as specified and directed. Note:- All incoming / outgoing MCBs shall be measured and paid under appropriate item here-in after

Supply & fix recess mounted downlighter LED 24 W with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integral electronic low THD (<10%) LED driver. suitable for Armstrong/Grid ceiling at any height complete all as specified and directed. Make:- INTEGRANEODLR24WLED857S of Havells / Crompton / Philips

Supply & fix environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire 10 W comprising of high brightness LEDs. at any height complete all as specified and directed. Make:- HEXAFT10WLED857SSYMBOPC of Havells / Crompton / Philips

Supply and fix in repair surface PVC box 1/2 module complete all as specified and directed.

Supply and fix in repairt surface PVC box 3 module complete all as specified and directed.

Supply and fix in repair surface PVC box 4 module complete all as specified and directed

Supply and fix in repairs manual change over switch of 63 Amps in sheet metal enclousure complete all as specified and directed. Make:- Havells / Legrand / L&T

Supply and Fix in repairs earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

Supply and Fix in repairs for earth contunity conductor or main earthing lead fixed to wall on recessed or burried in ground or drawn in conduit/pipe fixed to poles or any other indicated situation for loop earthing as required 32x6 mm size galvanised strip complete all as specified and directed.

Material and labour for fabrication of out door type LT panel doors of any size as site requirement with locking arrangement made out of any size / thickness mild steel sheet and duly fixed/ welded with suitable size of butt hinges complete all as specified and as directed.

Supply and fix in repairs operating handle of size 20 to 25 mm in existing flameproof panel suitable for operating On/ OFF for MCB of capacity 6 A to 40 A etc as required at site complete all as specified and directed.

Supply and fix new generation energy saving environmental friendly, long life, exclusive innovative die-cast aluminium IP-65 flood light with high power LEDs of 120W as light source, suitable for highlighting architectural facade highmast and general purpose lighting, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including brackets on new pole and fitted street light pole complete all as specified and as directed. Make : JETAIRISFL120WLED757ARWBLTG of Havells or equivalent in Philips/ Wipro/ Crompton

Supply and fix in repairs Flame proof weather proof elbow 3/4" complete all as specified and directed.

Supply and fix in repairs Flame proof weather proof elbow 1" complete all as specified and directed

Supply and fix in repairs FLP junction boxes LM-6 with plain cover 3 Way suitable for 80 mm dia 3/4" ET size complete all as specified and directed.

Supply and fix in repairs FLP junction boxes LM-6 with plain cover 4 Way suitable for 80 mm dia 3/4" ET size complete all as specified and directed.

Supply and fix in repairs FLP Double compression gland of 2 inch size complete all as specified and directed.

Supply and fix in repairs inverter 1050 VA and battery 150 AH sign wave minimum 4 hrs backup with input voltage 12 V and frequency 50 +/-1.0 HZ and output Voltage 180-220 V and Frequency 50 Hz with short circuit and over voltage protection for substation application complete all as specified and directed by Engg-in-charge.

ANUSHKA BUILDERS

AISWARYA ENTERPRISES

Borole Electricals

MAYUR ELECTRIC SERVICES

cooltech engineering services

Shree Ayyappa Engineering