SITC of 03 No. 4Way High mast lights at at Illahi bagh Chowk , Ahmad Nagar Chowk and Shah Mohalla Ahmad Nagar Capex City Grants

9.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole)

Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole).

Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm

Pre fabricated galvanized Four way top bracket to be fitted on top of Octogonal pole for holding lighting

DK thermoplastic cable Junction/ Termination T boxes 8"x10"of class IP55/IP65 fitted with two 6 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole.

200 Watt high mast LED Luminaries (Technical Specifications in SBD)

Surge Protector for the 200 watt LED type lighting fixture complete.

3X2.5 mm² PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly

LT 16 mm² 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.