Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.6 LAccepted-AOC NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹10.0 L+₹11,660 (1.18%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | 3₹10.5 L+₹59,395 (6.01%)Rejected-Finance NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | 3 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I Dhana
AGE I DHANA PIN 470228, DIST SAGAR, MP
REPAIR / REPLACEMENT OF JOINERY AND ALLIED B / R WORKS IN OTM ACCN OF 12 MARATHA LI REGT AND INF BN NO. 3 AT DHANA MIL STN.
2023_MES_596993_1
8300/DH/31/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I Dhana
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹20,000
Yes
5 Jul 2023
20 May 2023
21 Jun 2023
20 May 2023
19 Jun 2023
2 Jun 2023
Amount
Taking down wooden chowkhats or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame), complete all as specified and directed.
All as per item No 1.00 above but not exc 1.50 Sqm Each, complete all as specified and directed.
Taking down wooden shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm Each complete all as specified and directed.
Taking down wooden shutter of any description not exc 1.00 Sqm Each, complete all as specified and directed.
Supply & fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/black paint etc, complete all as specified and directed.
Supply & fixing 105 x 60 mm size Pressed steel frames 1.25 mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed.
Supply & fixing 165 x 60 mm size Pressed steel frames 1.25 mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.
Supply & fixing 35 mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24 (b) fitted to chowkhats, complete as specified and directed.
Supply & fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge.
Supply and fixing 35 mm thick 2nd class HW plain, framed, factory made paneled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), cleaned seasoned and chemically pressure treated, complete all as specified and directed.
Supply and fixing powder coated anodised aluminium frame Minimum thickness of 1.5 mm for doors, windows, ventilators with one or more rebates, including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron.
Supply and fixing aluminium anodised powder coated door shutters of aluminium section Minimum thickness of 1.5 mm including necessary jointing cleats, glazing clips, ruber neoprene packing , aluminium anodised powder coated fittings such as handle 2 nos, 100mm hinge 3 nos , 200 tower bolt 2 nos , mortice lock including keys 1 set , anodised aluminium snap beading & screws complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron
Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no), hinge type B-21 100mm long (2 nos), suitable handle (2 no), tower bolt (2 nos), complete all as specified and directed.
Supply and fixing aluminium anodised grill of aluminium section Over 50 mm Pitch including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws complete all as specified and directed.
Material & labour in repair 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/ Kitchen cupboard with teak beading of all sides, complete all as specified and directed.
Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyester paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyester powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. Note:- Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2
Supply & fixing in repair steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete as specified and directed.
Supply & fixing in repair steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded, complete as specified and directed.
Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.
Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.
Material & labour for mild steel 0.63 mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending or turning up mitred angles etc as requires, complete all as specified and directed.
Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete all as specified and directed.
Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed.
Supply & fixing tinted / coloured floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4 mm thick complete all as per specified and directed.
Supply & fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.
Supply & fixing in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.
Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 20 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length, complete all as specified and directed.
Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed.
Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed.
Supply & fixing 125mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.
Supply & fixing 100mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed.
Supply & fixing 100mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.
Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed.
Supply and fixing 10 to 15 mm Toughened glass door shutters including necessary jointing cleats, glazing clips, rubber neoprene packing, stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws complete all as specified and directed.
Supply and fixing frosted film or logo in any type or design and size complete all as specified and directed.
Material and labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed for toughened glass door etc, complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. including cement mortar bedding (but not backing). complete all as specified and directed.
Material & labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Rounding to edges of the stone slab on edge such as cooking platform and other similar work., complete all as specified and directed.
Material & labour for Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps , bathroom self, corner incl necessary cutting chasing) jambs, pillars, window cills, cocking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.
Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
Material & labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item No. 42.00 above but one coat of synthetic enamel paint over old steel surfaces complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, including preparing new plastered surface of wall and applying two coats of oil bound distemper, complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, including preparing new plastered surface of wall and applying two coats of cement based paint, complete all as specified and directed.
Material and labour for 5mm thick rendering in cement mortar 1:4 on on concrete surfaces as in ceiling, finishing the surface even and smooth without using extra cement, including preparing new plastered surface of ceiling and applying two coats of white wash, complete all as specified and directed.
Supply and fixing in repair steel rolling shutters, ball bearin, as specified and incl top cover , anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle, complete all as specified and directed.
NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 26,600.00 /- ]
SUNIL KUMAR KORPAL
M/S JAINENDRA KUMAR JAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .