REPAIR TO ROOF, CHAJJA FACIA, PLASTERING, JOINERY, TILING SANITARY FITTING ETC IN CERTAIN BLDGS AT CIRCULAR ROAD AND STN ROAD UNDER AGE BR-III OF GE(SOUTH) MEERUT CANTT

Amount

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed.

All as per item No 1.00 above but area exc 1.50 Sqm but n-exc 4.0 Sqm each

Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each

S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm mild steel sheets complete all as specified and directed

S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

S&F for factory made gauged shutter made out of angle iron 35mmX35mmX5mm and 25mmX25mmX5mm and 1.5mm thick, 10mm dia square bars grill with stainless steel fly proof wire mesh having 0.5mm nominal dia wire and 1:4mm average with aperature including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for built in steel cup board with pressed steel frame of size 75mmX45mmX1.25mm thick with pressed steel shutter 1mm thick Godrej pattern fixed to massonary wall by hold fast made out of 25x3mm flat iron including MS hanging rod of 10mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrengments including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5mm graded stone aggregate complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed.

Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed.

Supply and fixing for aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed.

Supply and fixing for 150mm long aluminium handles cast type anodized complete all as specified and directed.

Supply and fixing for 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed.

Supply & fixing Mild steel pressed handle 125 mm in size oval type stone enamelled black fixed complete all as specified and directed.

S&F Mild steel tower bolts of 150mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Supply & fixing, Mild steel sliding door bolt having 250mm long 16mm dia with and including 1 minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S&F Box Type steel windows/Ventilator with pressed steel frame made out from 1.25mm thick steel with one or more rebate with glazed shutters and mosquito proofing shutter including guard bars, cutting holes and painting with one shop coat of zinc chromate primer including making good the disturbed surfaces and match with the existing surfaces by providing whitewash / colourwash / distempering / cement base paint complete all as specified & directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel/wooden windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

All as per serial item No. 23.00 above but pin headed glass 3 mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F Brand Facroty Made 18mm thick 100% Solid WPC (Wood polymer Composite) plain Board of reqired size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing including 150mm size stainless steel bright finish handle and stainless steel auto hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate complete all as specified and directed.

Material and labour for preparation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surface, over 10 cm width or girth complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over 10cm width or girth complete all as specified and directed.

Supply and fixing powder coated anodized aluminium door made out of hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disc or D type handles, 02 Nos aluminium tower bolts 200 mm size, one aluminium sliding door bolt of 250 mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5mm thick tinted glass and partly panelled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws complete :- Chowkat frame : 110.60 x 44.45 x 1.55 mm, Shutter vertical / stile : 85 x 44.45 x 1.54 mm, Shutter middle rail : 83.50 x 44.45 x 1.54 mm, Top and bottom rail : 1.15 x 44.45 x 1.54 mm, Make (i) Anodised aluminium section : Jindal / HINDAL Co/INDAL Co (ii) Particle board : NOVAPAN, DURATUFF (iii) Glass : SAINT GOBAIN/MODIGUARD/TATA

Supply and fixing powder coated aluminium sliding window made out of hollow extruded aluminium sections as mentioned belwo and glazed with tinted glass 4 mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150 mm long incl grill with one more rebates etc complete all as specified and directed by Engr-in-charge. Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x 15 x 1.60 mm Shutter side (handle) size 37.50 x 15 x 1.36 mm Chowkat bottom size : 50.30x26x1.20 mm Chowkat top & sides : 50.30x15x1.00mm Make (i) Anodised aluminium section : Jindal/HINDAL Co/INDAL Co (ii) Glass : SAINT GOBAIN/MODI GUARD/TATA

M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Supply and fixing in repair for 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof covering complete all as specified and directed.

Material & labour for fiber sheet cement 6mm thick corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed .

Material & labour for fibre sheet cement 6mm thick two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed.

S&F structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 including distmantling of old structural steel work of any description complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.

M&LCement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30cmx30cmx20mm thick, set on cement mortar 1:2, 12mm thick screed grouted with cement sand mortar 1:4 mixed with water proofing compound as per manufactures instructions and pointed in neat cement slurry in floors with grey cement and no pigment including taking down old unserviceable tiles of any size complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 including taking down old unserviceable tiles of any size complete all as specified and directed.(Make: Kajaria/Somany/Orient).

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction including taking down old unserviceable tiles of any size complete all as specified and directed. (Make- Kajaria / Somany /Johnson / Orient).

All as per serial No. 45.00 here-in-before but in skirting / dado and including 10 mm thick screed bed CM1:6 including taking down old unserviceable tiles of any size complete all as specified and directed. (Make-Kajaria/Somany/Orient).

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4 including taking down old unserviceable tiles of any size complete all as specified and directed.

M&L for Udaipur Green Stone polished 12 to 14mm thick(table rubbed &polished) in steps, jambs, window cills, cooking platforms, sink and the like in CM 1:4 incl pointing in white cement mixed with pigment to match shade of stone incl rounding of edges and making holes for gas pipe including taking down old unserviceable tiles of any size complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc including taking down old unserviceable tiles of any size complete all as specified and directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe including taking down old unserviceable tiles of any size complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including demolition of old unserviceable one complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F 6mm thick Hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitted into the wall by using nails etc complete all as specified and directed.

Supply and fixing for anodised aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed.

Material and labour for 4 mm thick Armstrong ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified and directed.

M&L repair to overhang portion of chajja, facia, dropwall, canopy, porch, parapet, wall or similer location etc for discontinuos work by providing PCC (1:2:4) Type - B-0 and fihishing with CM 1:3 after taking down of damaged portion of RCC work by maintainig same thickness and finished the surface to match with the existing surface by providing same finish. area of work to be n. exc 1.50 Sqm each) Note : - Where reinforcement is required to be provided will be paid seperatelly under relevent items and contractor have to inform the department one day in advance after binding of renforcement for mesurement otherwise no payment will be considerd on this account).

M&L repair to overhang portion of chajja, facia, dropwall, canopy, porch, parapet, wall or similer location etc for discontinuos work by providing 20mm thick rendering with CM 1:3 after taking down of damaged portion by maintainig same thickness and finished the surface to match with the existing surface upto height 10mtr including necessary arrangments. complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks including demolition of old unserviceable one complete all as specified and directed

Supply and fixing in repair 15mm bore bib taps. Standard of PTMT any colour high pressure screwed for iron pipe (minimum weight of pillar tap 90 gms) complete all as specified and directed. Make : Symet/ Prayag/Polytuf.

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing in repair PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed.

All as per item No 65.00 here-in-before but length 600mm.

Supply and fixing in repair cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed.

Supply and fixing in repair plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length including taking down old unserviceable GI tuping complete all as specified and directed.

All as per item No 74.00 here-in-before but for 20 mm dia.

S&F in repair 15mm Unplasticised PVC pipes of pressure rating 10Kgf/Sqcm fixed complete to walls, ceilings or in floors etc including taking down, cutting chased in walls and their making good complete all as specified and directed.

All as per item No 76.00 here-in-before but for 20 mm bore pipe.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply and fixed in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed.

S&F in repair steel CP grating 100/125 mm dia incl waste hole where required at site complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L Brick work with fly ash old size bricks , straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with fly ash old size bricks(except bricks) of straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with fly ash old size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete wall surfaces of any description finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete wall surfaces of any description in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5mm thick cement plaster in CM 1:3 as on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of walls etc and applying two coats of OBD over and including a coat of 2mm wall care putty to match the existing surfaces of wall as required complete all as specified & directed.

M&L for old plastered or un-plastered surface of walls and applying two coats of oil bound distemper over and including a coat of 2mm wall care putty to match the existing surfaces of wall as required complete all as specified & directed.

M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified & directed.

All as ser item No. 93 above but one coat on old ceiling surface.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complte all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Supply and fixed in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

Supply & fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks three layered (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of old unserviceable water tanks complete all as specified & directed.

Supply & fixing in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S K CONSTRUCTION CO

VIRAT CONSTRUCTIONS

R.D.Builders

Jay Ambay Enterprises

Tayal Builders

M/s D.K.Enterprises