Renovation of connectivity service road of Dhukwan Dam at jhansi

Amount

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.

Providing laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade butumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and graded to be followed by seal coat of Type C as per Technical Specification Clause 508.

Providing and applying tack coat with Bitumen VG-10 using distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and applying primer coat with bitumen emulsion MS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405.

Providing Laying a hot applied thermoplastic compound with 2.5 mm thick i/c reflecoring glass beads @ 250 gms per sqm area thickness of 2.5 mm exclusive of surface applied glass beads as per IRC-35-2015 the finished surface to be level,uniform & free from streaks & holes.

Reflective Raised Pavement Markers (Road Studs /Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylie styrene Acryionitnte) or HIPS or Acryionitntebutadiens styrenc (ABS) the marker shall supported a load of 1335 kg lested in accordance with ASTMD 4280 and its rellective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light enterning the lens face retro reflecting surface shall preferably be 35 5o to base and area of each retro reflecting surface shall not be less thain 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of idenfification of the manufacturer dimensions of road studs should not be less than 100 mm x100 mm x10mm RPM (without shank) as per ASTM RPM (with shank) as per ASTM

Retro Reflective signs (type-IV sheet) for single side Provding and fixing retro reflective signboards comprising of customised modular PU Epoxy coated MS angle iron frame work. Almunium composite panel (ACP) as base board micro primatic retro reflective sheet and electro cut coloured overday fime/latex printing the horizontal and vertical menbers including incllned outer members of the MS frame module shall be made of pair MS angle iron No. panel size shall be more than one sqm and each panel shall be braced not more than 3 mtr. on front visible face of the ACP micro primatic retro reflective sheeting shall be lested for 3 year outdoor incuding all material, labour complete as per direction of the Eingineer in charge signage on MS angle frame of (35x35x5)mm

M/S MAA SHARDA CONSTRUCTION AND SUPPLIERS