Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L1 | Accepted-AOC LOWEST BIDDER. | |
| 2 | L2₹11.4 L+₹24,731.50 (2.21%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST BIDDER. | |
| 3 | L3₹14.6 L+₹3.4 L (30.4%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST BIDDER. |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANJAY KUMAR, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR TO JOINERY IN CERTAIN BUILDINGS MD ACCN ZONE A AREA AT VSN, NAGPUR
2023_MES_599024_1
8612
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹26,000
23 Aug 2023
27 May 2023
1 Jul 2023
27 May 2023
24 Jun 2023
10 Jun 2023
Amount
Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.
Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5 sqm each all as specified and as directed.
Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
Supply &Fix IInd class HW plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.
Supply & Fix mild steel flat iron hold fast including bolts conforming to Fe 410-0 of Fe 310-0 all as specified and as directed.
M&L providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces all as specified and as directed.
S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides make as approved by GE.
S & F 2nd class hardwood glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into Sqms edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc all as specified and as directed.
All as per item No. 9 above, but 30 mm thick.
S&F ply wood grade BWR type BB 18/19mm thick (9PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.
S & F of Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 160 of SSR Part-II 2010.
S&F factory made solid panel PVC door wire gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of stainless steel wire cloth i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.
Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.
All as per item No 16 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.
S&F sheet glass ordinary quality 3mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.
All as per item No 19 above but pin head type
S&F Block board, grade 1 quality, exterior grade, commercial type with one side decorative face 18/19mm thick.
M&L 12mm thick prelaminated particle bard, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.
M&L 18/19 mm thick prelaminated particle bard, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.
S&F butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.
S&F butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.
S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
S&F floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
All as per item No 28 above but 150mm long
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long.
All as per item No 30 but 100mm long
S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.
M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
All as per item No 33 above but on steel surfaces over red oxide primer.
S&F 100 mm long stainless steel butt hinges all as as directed.
S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.
M&L welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.
S&F in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.
M/L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .
S &F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.
S &F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief.
Supply only for 6mm thick, (consting of 5 Nos of Ply), plywood BWR, type BB.
Supply only for 12mm thick, (consting of 5 Nos of Ply), plywood BWR, type BB.
S & F Block board 18/ 19 mm, grade 1 quality, exterior grade, commercial type, decorrative type on both faces
S&F aluminium louvered type ventilator with frosted glass and all fittings, closing and opening type all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240
Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering all as specified and directed.
Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.
S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.
S&F Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.
S & F 2mm thick fibre glass reinforced translucent corrugated sheet with two corrugation sheet with two corrugation side laps fixed with L-type or J-type or cranked hook bolts all as specified and as directed, including taking down old sheet.
S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. including taking doen old floof spring hydraulically.
S & F of Poly carbonate sheet including aluminium profile with rubber beading and profile screws complete all as specified and as directed.
S &F 5mm PVC rubber sheet for doors complete all as specified and as directed
SF in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes,channels assembly ,locking system to hide rope knot .rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. Make:- Easy dry or other equivalent make as approved by GE.
Supply and fix SS 202 steel grade 5mm wire Thali basket (17x20x8) inch complete all as specified & directed . Make: luxury style or equivalent
Supply and fix SS 202 steel grade 5mm wire Cup- saucer basket(17x20x4) inch complete all as specified & directed .Make: luxury style or equivalent
Supply and fix SS 202 steel grade Plain utility (17x20x4) inch complete all as specified & directed . Make: luxury style or equivalent
Supply and fix SS 202 steel grade 5mm wire plain utility(17x20x8) inch complete all as specified & directed . Make: luxury style or equivalent
Supply and fix SS 202 steel grade 5mm wire cutlary basket(17x20x4) inch complete all as specified & directed .Make: luxury style or equivalent.
Supply and fix SS 202 steel grade 5mm thick wire Dustbin holder( 9x12 ) inch complete all as specified & directed . Make: luxury style or equivalent
Supply and fix Teliscopic channels 500mm regular complete all as specified & directed . Make: luxury style or equivalent
Supply and fix Nickel and cromium plated auto close hinges regular complete all as directed .
Supply and fix shutter in 18 mm waterproof marin ply with both lamanation one side white and other side of specified colour as directed with edge binding complete all as specified & directed.
Supply and fix 600mm carecase made with MDF and doors with Marino ply with both side lamination one side white and other side of specified colour as directed with edge binding complete all as specified & directed.
Supply and fix Aluminium 'G' section handles complete all as specified & directed. Make -Luxury or equivalent
Supply and fix 20 G steel hollow section welded frame with powder coated (white colour) of various section for base frame complete all as specified & directed.
Supply and fix asbestos Cement sheet 12mm thick for loose (panel) complete all as specified & directed.
Material and labour for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and mouldidng/rounding the edge complete all as specified and directed.
Dismantiling of existing kitchen (Including cooking platform, pedestals & boarding with frame complete all as specified and directed.
Supply and fix ply 18mm thick lamination (white colour ) both side Innotek drawer (Heavy drawer capicity 35 Kg) complete all as specified & directed.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with waste pipe complete with overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm and as directed.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed
M &L for rendering 15 mm thick in CM 1:6 over brick or concrete surfaces, finished fair and even all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distamper over a coat of approved putty all as specified and as directed.
Excavating in post holes (or similar holes) each in loose/soft n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.
Removing excavated material n exc 50 m and depositng where directed at a level n exc 1.5 m above the starting points all as specified and directed
Dismantling fencing wire mesh, any type
Fixing only Chain link fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including provision of binding wire all as specified and as directed.
Supply only Chain link MS galvanised fencing, any size or type all as specified and as directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts mild steel Framed works such as in fencing posts/ struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work confirming Fe 410-0 or Fe-310-0 all as specified and as directed.
S&F mild steel framed work such as in doors or gates using angle or other sections with gusset plates, rails, braces etc complete, drilled for and including steel sheeting or covering as required. Doors etc to be prepared for hanging or sliding with and including hooks and hinges of steel for hanging door and other fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S &F Joist , channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe-410- W(Gde- quality- B)
M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40mm graded aggregate) etc complete all as specified and as directed
M/s ABHIMAN HEGDE
Rajveer Infrastucture
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .