Reconstruction of class IV Qtrs. No. 12 to 16 in G.l.R. Sy. No. 251/847- A, Old Post Office Road, Belgaum Cantonment.

Amount

Reconstruction of class IV Qtrs. No. 12 to 16 in G.l.R. Sy. No. 251/847- A, Old Post Office Road, Belgaum Cantonment

Dismantling of corrugated AC sheet roof with J hooks and returning to store.

Dismantling timber scantlings 40 Sqm. & over unframed work and returning to store

Taking down choukats frames not exc 1.5 Sqm alongwith shutters (without shutters taking down) and returning to store

Taking down choukatts along with shutters exc. 1.5 Sqm. But Nexc. 4 sqm.and Returning to store

Demolition of brick wall built in cement mortar

Taking down carefully copper/aluminium point wiring(Light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately),removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors, etc.

Demolition of cement concrete(unreinforced) in ground floors and pavings nexc. 15cm thickness below/above ground level.

Demolition of cement concrete(unreinforced) in ground floors and pavings exceeding. 15cm thickness below/above ground level.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for the purpose

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed

Removal of Soil exc. 250 m not exc. 500m & depositing as directed etc. complete

Excavating over area nexc. 1.5m deep & getting out in hard/dense Soil

Excavating in trenches over area exceeding. 1.5m deep & getting out in Hard/dense soil

Excavating in trenches n exc. 1.5m width & n exc 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard soil

Surface excavation not exceeding 30 cm deep & averaging 15 cm deep in Hard Soil

Hardcare of gauge exc. 63mm n exc. 100mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rolled/ rammed to a true surface M & L Broken stone or boulders

Cement concrete in foundations, filling & Mass concrete. Type D. 2 1:4:8 (40 mmagg) M & L

TMT bars 10mm dia & over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips M & L

TMT bars 6 mm to 8 mm & over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clipsM&L

M.S. bars. 5mm & dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips upto and including 10mm dia in strirrups, spacers and binders and round bars Fe-410-W(Gde.E.-250) M & L

Formwork to side of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work vertical or to batter rough finished surface of concrete flat M & L

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface of concrete flat Square rectangular or polygonal M & L

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc. rough finished surface of concrete flat M & L

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200 mm thick(Horizontal or sloping) rough finished surface of concrete flat M & L

Formwork to faces of walls retaining walls, abutments, parapets and staircase railings and similar work vertical or to batter rough finished surface of concrete flat M & L

Formwork to chullah hoods, chajjas, troughts and similar items including edges rough finished surface of concrete flat M & L

Formwork to staircases with sloping or stepped soffits including risers and stringers(excluding landing) Rough finished surfaces concrete flat M & L

Reinforced cement concrete (design mix) for foundations, including rafts, footings, foundation beams plinth beams bases for columns etc basement slabs under-reamed piles and mass concrete M 20 (20mm graded aggregates) M & L

Reinforced cement concrete (design mix) for Columns, pillars piers, posts and struts M 20 (20mm graded aggregates) M & L

Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spresd leveled and rammed including watering (Single) M & L

Treating the top surfaces of filled earth for anti termite treatment at the rate of 5 liters of emulsion per square meter of surface M & L

Reinforced Cement Concrete (Design mix) beams, cantilevers, bressummers, lintels over 1.5 m span M20(20 mm graded aggregates) M & L

Precast Cement Concrete block masonry with solid blocks, exc 10cm in width and setting in mortar, complete Type C1 1:3:6 (20 mm graded aggregates) M & L

Providing cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5cm clear span cills, steps seismic and other similar bands, plinth courses string courses lacing courses parapets and railing upto 60cm in height coping, kneelers,apex stones, bed plates, kerbs nor provided for in items 04028, water throughs and the like including weathering, slightly rounded or chamfered angles and throating, as direted Type B1 1:2:4 (20 mm graded aggregates) M & L

Rendering 10mm thick on fair faces of brick work or concrete surface cement plaster 1:4 M & L

Reinforced Cement Concrete in Chajjas M20 design mix (20mm graded Aggregates) M & L

Reinforced cement concrete (design mix) in Walls, retaining walls, basement walls and like any thickness above top of footings including attached pilasters and buttresses M 20 (20mm Graded Aggregates) M & L

Reinforced cement concrete (design mix) in Slabs supported on walls beams and columns in floors, roofs,landings, balconies, canopies, deck slabs and in shelves and the like M20 (20mm graded Aggregates) M & L

RCC chullah hoods stairways (except spiral staircase) including steps(square or spandrel), string pieces,carriages etc, complete any section straight or winding, but excluding landings, RCC water tanks upto 1500 litrs M20(20mm graded Aggregates) M & L

RCC 1:2:4 (20mmagg) in columns, pillars, piers, posts and struts.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I S 1161 1979 grade St.-240 S & F

Fibre glass reinforced translucent corrugated sheeting with two corrugations side up fixed with L- Type or J type or cranked hook bolts S&F thickness 2mm

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mps as in roof covering/cladding to wall fixed with self tapping screw as specified S & F .

Rendering 20mm thick plaster in cm 1:4: to concrete surfaces or on fair faces of brick work M & L

Rendering 12mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:4 M & L

Machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grew cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete M &L

S&F coloured Vitreous China squatting pan Orissa pattern, size 580m x440mm, with integral foot rests (including flushing cistern and flush pipe)

S&F coloured Glazed ceramic tiles in vertical surface 300 X 200 X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles

S&F coloured Non-skid ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Coloured tiles

S&F Plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, second class Hardwood

S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides flush shutters thickness in 30mm

S&F first class Hardwood, but segmental, worked from the solid Plain solid straight chowkats and frames, wrought, framedrebated on the solid, rounded or chamfered, put together with glue pinned at joints,

S&F coloured Solid PVC Door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling and fixing on opening as per specification and drawing

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick(stiles) with 2,4, or6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing S&F with wood free EPS

S & F Butt, hinges, heavy weight, cold rolled mind steel and fixed medium weight Hinges size of hinges 125mm size

S&F Butt hinges heavy weight, cold rolled mild steel, and fixed, medium weight 75mm size

S&F Mild steel pressed handles, oval type, stove enamelled black 150mm size

S&F Mild steel sliding door bolts, plate type, stove enameled black , with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm size

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed mild steel tower bolts 150mm size

S&F Mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed less than 12, 200mm size

S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed size of hinges,100mm size

S& F mild steel tee hinges, stove enameled black, medium typeand fixed, but heavy type 150mm size

S&F Mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed ,300mm size

S&F Plainned one side, with butt joints and fixed with nails supplied and fixed boarding softwood 2nd class 25mm thick

Machine cut kota stone slab flooring 20/25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete M&L

Vitrified coloured ceramic tiles 10mm thick(square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Light Shade M&L

M&L Vitrified colored ceramic tiles 10mm thick(square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Dark Shade

M&L Chequered cement concrete tiles 20cm x20cm x25mm thick set jointed and pointed in neat cement slurry in floor with white & gray cement and pigment

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement plaster 1:6

S&F Cement concrete type B-1,1:2:4 (20 mm agg), 55mm thick including 10mm plastering in cm 1:4 on concrete surfaces

Rendering 10mm thick plaster in cm 1:4 to concrete surfaces or on fair surfaces brick work and setting coat 3mm thick in cement plaster 1:2 trowelled to even and smooth finish M & L

S&F Brick coarse aggregate with portland cement 1:4:8 (40mm agg) M 7.5

Brushing neat cement slurry with 3.0 kg of cement per sq.meter M & L

S&F 1:2:4 (20mm agg) 70mm thick in floors with 10mm thick cement plaster in CM1:4 to concrete or brick work surfaces

S&F Framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes frmaed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work con-forming to Fe.290.Gde-E-165

S&F Plain galvanized mild steel sheeting in ridges hips valley gutters drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 thickness in mm 0.63mm

Framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either looks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete fe 410-w

S&F Anodized aluminium frames for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified with powder coating(minimum thickness of powder coating 50 micron)

S & F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/sqm including necessary joining cleats glazing clips ruber neoprene packing handles 2 Nos in each door hinges anodized aluminium snap beading screws etc complete all as specified

S&F Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane 5.5mm thick frosted, ground or obscured on one side.

S&F preparation of new surfaces Exc. 10cm width of steel & iron primer with Red Oxide, zinc chrome, synthetic enamel (ordinary tint) two coats.

S&F Preparation of new wood surfaces exc. 10cm width pink primer, synthetic enamel (ordinary tint)two coats.

S&F Neeru finishing to exposed surfaces

Preparation of new surfaces walls, priming plastered and other surfaces with alkali resistant priming paint, Distempering walls with distemper Oil bond emulsion two coats M&L

Preparation of new surfaces walls, priming plastered and other surfaces with alkali resistant priming paint, Distempering walls with Cement paint two coats M&L

S&F Cement concrete in surface channels, drains Type B2 1:2:4 (20 mm agg)

PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floors S&F 110 mm dia

PVC (SWR) Pipes single socketed, in any length with rubber ring joints ,laid in trenches or in floors S&F 75mm dia

PVC (SWR) Pipes bends any radius S&F 75mm dia or 110 mm

Providng precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks(for use with masonry), string courses, copings. Kneelers, apex stones, pier caps, coloumns , posts, boundary pillars, bed plates, pintle blocks, anco rage blocks, bounders(for stone wallin) corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc and setting in mortar complete with joints to match, but in landings, cover slabs(for man holesetc) chullah hoods, chajjas,water thoughts, mangers, shelves and similar articles with plain faces Precast cement concrete Type B1 1:2:4 (20 mm agg) M&L

S&F Low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2 fixed to complete to walls, ceilings or in floors etc. 40mm dia

S&F High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls ceiling or in floors etc S&F 25mm dia

S&F Unplasticised PVC pipes of pressure 10kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe 15 mm dia

S&F Push tap any colour high pressure of PTMT Screwed for iron pipe and fixed(minimum weight15mm-47gms/20mm-75gms)

S&F Unplasticised PVC pipes of pressure 10kgf/cm2 fixed compelet to walls, ceiling or in floors etc any type of pipe 20mm dia

S&F Cement concrete type c2 1:3:6 (40mm grated agg) 100mm

One light point or one fan point controlled by one switch 1.5 sqmtr size PVC casing & capping PVC sheathed cable M&L

One light point or one fan point controlled by one switch 2.5 sqmtr size PVC casing & capping PVC sheathed cable M&L

One bell/Buzzer point. controlled by one button on the same board with other switches or independent with cables 1.5sqmtrs Size PVC sheathed cable M&L

One 3 pin 5Amps socket outlet independent but below the switch board of light points in the same vertical plane, with cable, 1.5 sq mtrs size PVC sheathed cable M&L

One 3 Pin socked outlet 5 Amps on the same board with other switches, with cables 1.5sqmm size PVC sheathed cable M&L

Lamp holder, PVC/polycarbonate type with card grip cap suitable for pendant fittings M&L

Ceiling rose 3 phase PVC/polycarbonate /isolated body M&L

Switch piano, flush type single pole one way 5Amps S&F

Bell AC 230 volts single pole S&F

Switch piano, flush type single pole one way S&F 15Amps

S&F Socket out let 3 pin 15Amps flush type

S&F electronic dimmers 450 W& 250W flush type on the existing phenolic laminated sheet etc as reqd

S&F Isolator SP 40A 240w

S&F Isolator Double Pole 40A 240W

M&L Sheet Metal enclosure for Distribution Box for use of MCB Single pole & neutral

Earthing complete with galvanized steel pipe electrode 40mm bore, medium grade, 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earting lead of 4mm dia galvanized iron or steel wire all as shown in plate No. 4 to the earthing test point all as specified and indicated including testing on completion M&L

Wiring for circuit/sub main wiring along with earth wires with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed 2x4. Sqmm +1x2.5 earth wire in PVC casing caping

XLPE, insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core M&L

CFL light fitting 1x9w bulk head luminaries, with lamp holder, etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ M&L

Supply of Chain link MS galvanized fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire

Preparation of new surfaces walls, Distempering walls with Cement paint two coats M&L

PRASANNAKUMAR D. LATTHE

M/s S N Atiwadkar