ADDN/ ALTN OF P-454 MG ENCL AT HALDIGHATI LINE AND TOILET AND BATHROOM OF JCOs MESS OF RAJ UNDER ZONE-III AREA AND SPL REPAIR TO ROOF TREATMENT OF BLDG P-394 OF IBSC UNDER ZONE-III AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

19/MIN/61SA/Q3W/2023-24: Taking down cement plaster , any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc built in CM, complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 40 16/SR/61SA/BLDG/2023-24/Q3W: 260

M&L rendering 15 mm thick on stone masonary surface or surface or other sureface fair face of brickwork in CM (1:6) , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 15 16/SR/61SA/BLDG/2023-24/Q3W: 100

M&L rendering 15 mm thick on stone masonary surface or surface or other sureface fair face of brickwork in CM (1:4) , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 20 16/SR/61SA/BLDG/2023-24/Q3W: 110

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling., complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 5 16/SR/61SA/BLDG/2023-24/Q3W: 50

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash over and include 1mm wall care putty on walls , complete all as specified and as directed.

M&L for preparation of new plastered surfaces of Ceiling and applying three coats of white over and include 1mm wall care putty wash, complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 5 16/SR/61SA/BLDG/2023-24/Q3W: 50

M&L applying two coats of cement base paint white or tinted over 1mm wall care putty on new wall surface including preparation of surface., complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 20 16/SR/61SA/BLDG/2023-24/Q3W: 110

M&L applying two coats of cement base paint white or tinted over 1mm wall care putty on old surface wall including preparation of surface., complete all as specified and as directed.

M&L for preparation of Old plastered surfaces of wall and applying two coats of white wash on walls 1mm wall care putty, complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 5

M&L for preparation of Old plastered surfaces of Ceiling and applying two coats of white wash on 1mm wall care putty, complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 40 16/SR/61SA/BLDG/2023-24/Q3W: 300

Taking down Chowkats or frames not exc 1.5 sq. each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

Taking down Chowkats or frames not exc 1.5 sq. Sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete as per manufacturers specification and, complete all as specified and as directed.

S&F 35mm thick IInd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete including taking down old ventilator/window, complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded & incl taking down old window, complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded & incl taking down old window , complete all as specified and as directed.

Dismantling framed work and M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165., complete all as specified and as directed.

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise , described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer., complete all as specified and as directed.

M&L Applying two coats of synthetic enamel paint on steel & Iron surfaces of any description, not otherwise , described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide zink chrome., complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 5 33/MIN/61SA/Q3W/2023-24: 10

S&F Butt hinges 100mm size medium weight cold rolled stainless steel., complete all as specified and as directed.

S&FAluminium anodised, barrel tower bolts 150mm long of ex truded section and fixed, complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised 125mm size , complete all as specified and as directed.

S&FAluminium alloy, anodised, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long., complete all as specified and as directed.

S&F sheet galss 4mm thick , oridnary quality & glazing with oil putty in square n exc 0.5 sqm in each pane., complete all as specified and as directed.

S&F in repair CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water, complete all as specified and as directed.

Demolition of old existing unserviceable EWC seat and S&F Snow white color Vitreous China WC wall mounted with flushing cistern PVC sheet cover size 670x390x780 (Make : Cera Clair Cat No S1031102 two piece wall jung Extended EWC cat Part No S1060102 Cistern Cat No. B1510108 clair seat cover Cat No. B1810105 Twin flush fittings or equivalent)

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, (IWC) size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe), complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltrs capacity, complete all as specified and as directed.

S&F in repair Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors., complete all as specified and as directed.

S&F in repair Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to wall., complete all as specified and as directed.

S&F Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) diminishing pieces or tapers (larger bore meassured)., complete all as specified and as directed.

S&F Cast iron 75mm bore cowls, complete all as specified and as directed.

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S& F Rotational moulded polye thylene water storage tanks 3 layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantalling old water tank., complete all as specified and as directed.

M&L Ball brass valves,20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

S&F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but but fancy type, complete all as specified and as directed.

S&F in repair stop valve 15mm bore , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F in repair stop valve 20mm bore , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 15mm bore steel water tubing mdeium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 20mm bore steel water tubing mdeium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

M&L Framed work as in doors frame 40x40x6mm or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing , complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles size 300x400x7 mm thick on walls etc in the combination of light and dark shed concept , set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in cement mortar (1:6) Pattern, complete all as specified and as directed.

M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match over and including 15mm thick screed in cement mortar (1:4) Pattern, complete all as specified and as directed.

M& L in repair Stop valves concealed 15mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed.

M&L in repair Chromium plated Overhead Rain shower with relvolving joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn , complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 1.50 16/SR/61SA/BLDG/2023-24/Q3W: 2.50 33/MIN/61SA/Q3W/2023-24: 2.50

M&L 50 mm thick PCC type C-1 (1:3:6) using 20mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection., complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 30 16/SR/61SA/BLDG/2023-24/Q3W: 52.50 33/MIN/61SA/Q3W/2023-24: 12

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 0.40 33/MIN/61SA/Q3W/2023-24: 2

M&L for brick work with subclass 'B' bricks, straight or curved on plan any radius in half brick thick wall built in CM 1:4., complete all as specified and as directed.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cisten, complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F in repair Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe , complete all as specified and as directed.

M&L Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M&L FI hold fast 25x3mm welded to angle iron door frame with nut & bolt / welded to frame, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S&F in repair Vitreous ( WHB) China wash basin, white, flat back, size 550x400mm but including brackets, coupling and 32mm dia waste pipe, complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 1.60 16/SR/61SA/BLDG/2023-24/Q3W: 16.0

M&L on floor roof Cement concrete 40mm type B-0, 1:2:4 (12.5mm graded stone aggregate) , complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 40 16/SR/61SA/BLDG/2023-24/Q3W: 400

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and loose particale and disposed off the rubbish outside the defence land. (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks . (c) Cracks of 15mm widht are filled with URP cement grouting by injecting nozzles by authenticated applicator carefully by following manufacturer's instructions. (d) After drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat . (e) Necessary gurantee for 5 years shall be submitted by the contractor., complete all as specified and as directed. Make: Sika/ Asian Paints (Except smart care damp proof)/ IWL/ Berger Paints/ TikiDAN equivalent makes 19/MIN/61SA/Q3W/2023-24: 40 16/SR/61SA/BLDG/2023-24/Q3W: 400

S&F Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level ), complete all as specified and as directed. 19/MIN/61SA/Q3W/2023-24: 1.10 16/SR/61SA/BLDG/2023-24/Q3W: 14.6

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick screed bed, complete all as specified and as directed.

16/SR/61SA/BLDG/2023-24/Q3W M&L for preparation of new plastered surfaces of wall and applying two coat of Oil bound distemer over 1mm wall care putty on walls , complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applyingt wo coat of Oil bound distemer over 1mm wall care putty on walls , complete all as specified and as directed.

M&L for preparation of Old plastered surfaces & applying two coats of cement base paint white or tinted over 1mm wall care putty on new wall surface including preparation of surface., complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in sub base, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature , jointed with cement mortar 1:3 (1 cement:3coarse sand), including making joints with or without grooves (thickness of joint except at sharp curve shall mot to more than 5mm ) including making drainage opening wherever required, complete all as specified and as directed.

33/MIN/61SA/Q3W/2023-24: M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement, complete all as specified and as directed.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane, complete all as specified and as directed.

S & F Steel work in tubular trusses of required shape and size including special shaped washer etc. complete using ERW or induction butt welded (hollow square/ rectangular) tubes conforming to IS 1161-1979 grade St.-240 fixing/supported on wall complete all as specified and directed.

S&F Pre Painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensil strength of 550Mpa as in roof covering with screws , complete all as specified and as directed.

S&F Aluminium snap grid frame work of grid size 605 x 605mm for false ceilling, complete all as specified and as directed.

M&L for Exposed metal frame ceilling with 6mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceilling shall be measured and paid seprately, complete all as specified and as directed.

M&L coloured Non skid ceramic tiles 7 to 8 mm thick square/rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over 15 mm thick screed bed in CM(1:4), complete all as specified and as directed.

M&L hardcore gauge 40 to 80mm stone aggregate,deposited, spread ,and levelled in layers n exc 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L Preparing new plastered surfaces applying two coat of oil bound distemper, complete all as specified and as directed.

S&F in repair Fancy type MS bracket suitable for curtain rod, complete all as specified and as directed.

S&F in repair 20 mm dia Drapery Fancy type curtain rod, complete all as specified and as directed.

S&F in repair caps/ side Bulbs PVC suitable for curtain rod , complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate., complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminimum anodised frame fixed type with aluminum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws etc, complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminimum anodised door/window shutter openalbe / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc, complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and as directed.

Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for shafts, wells, manholes etc not exc 10 Sqm on plan and getting out soft/ loose soil , complete all as specified and as directed.

Removal of excavated soil to a distancen exc. 50m and depositing where directed, complete all as specified and as directed.

Returning,filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil, complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and as directed.

19/MIN/61SA/Q3W/2023-24: (E/M) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed. (Note-1. The cost of cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring.)

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on the same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per Item No 98 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & directed by Engr-in Charge.

All as per Item No 98 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & directed by Engr-in Charge.

S&F in repair switch, piano type 230/250 volts complete all as specified and as directed.

Single pole, one way 5 Amp rating

Single pole, one way 15 Amp rating

S&F in repair Socket, piano type 230/250 Volts complete all as specified and as directed.

Socket 06 Amp rating 3 pin

Socket 16 Amp rating 5 pin 2-in-1

S & F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked.

S&F Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers all as specified and directed

Supply & fix in repair LED light fitting 1x 20 watt Ac decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from ceiling rose complete. Make:Philips 20W Ujjwal or equivalent make as per Appx 'B'

Supply & fix in repair LED light fitting mirror type with high out put diffuser 2 feet 20 watt 220 V AC decorative type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete. Make:Philips 20W Batten cool day light strate linear or equivalent make as per Appx 'B'

S&F MCB distribution board, powder coated, SP&N , 240 volts, 12 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with double door, recess mounted, having insulated minimum 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required .

S&F in repair MCB 10 KA , C series 10 KA rupturing capacity thermal magnetic adjustable of the under mentioned type and rating :-

SP 5 to 32 amps

SPN 40 to 63 amps.

Taking down old U/s sub main wiring & M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit/ and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note : 2x4sqmm +1x4sqmm earth and one run of conduit suitable dia shall be measure one unit

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner). including taking down of existing u/s earthing

Supply & fix electric water heater storage type stell body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rate complete with all accessories such as safety valve thrmostate NRV connection pipe etc.

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt

MSR INFRATECH

Shree Karni Electrovision