CERTAIN REPAIR TO CENTRAL INSTITUTE IN THE AREA OF AGE BR-II UNDER GARRISON ENGINEER AMRITSAR CANTT

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for rendering 10mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint of 1st quality over a coat of primer to match the existing treatment ; Complete all as specified and directed by Engineer-in-charge.

Material and labour preparation of newly plastered surface of wall and applying two coats of oil bound distemper of 1st quality with necessary putty filling ; Complete all as specified and directed by Engineer-in-charge.

All as per item No 06 above but on ceiling surface.

Material and labour for applying average 1mm thick wall putty after complete removal of existing treatment on wall, ceiling, on old decorated surfaces or newly plastered surfaces ; Complete all as specified and directed by Engineer-in-charge.

Material and labour for two coats of smooth interior acrylic emulsion with Texture finish having VOC less tham 50 grams per Litre complying LEEDS criteria@ 1 Litre ( unndiluted)/ 10sqm mtr diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Litre per minute in both the coats of paint as per including complet Removal manufacturer instructions ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for complete removal of existing treatment of walls/pillars/cornices and applying two coat of weather proof exterior paint of 1st quality over a coat of primer, making smooth surface ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour preparation of old painted surfaces including removal of all existing treatment and applying one coat of plastic emulsion paint of 1st quality over Brick, wall t or Plastered surfaces to match the existing treatment ; Complete all as specified and directed by Engineer-in-charge.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 12 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing IInd class hard wood Glazed and skeleton shutters 30 mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing for 35mm thick 2nd class hard wood panelled shutters (two panels) Factory Made with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces, the size of rail & styles as per IS: 1003 (Part-I) klin seasoned & chemically pressure treated (factory made shutters). ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing for Factory made single extructed WPC but frame size 60 x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege

Supply and Fixing for Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw ; Complete all as specified and directed by Engineer-in-charge. ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly)

Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Anodised aluminium frame for doors, windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Tee etc section for weighing not less than 1.4 kg/RM ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. ; Complete all as specified and directed by Engineer-in-charge. Note:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely.

Supply and Fixing Providing and fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats,complete and powder coating in approved shade and colour ; Complete all as specified and directed by Engineer-in-charge. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely.

Supply and Fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixinf approved anodised aluminium standard section around the opening, all complete as per requirements and direction of Engr-in-charge.

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing toughned/Etching glass, 10 to 12 mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing ,S S Handal and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing figured glass, 5 mm thick ordinary quality, in squares Not ,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing repairs, Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete incuding taking down ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in Repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples window/wooden door ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty. ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Repairs glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in Repairs figured glass pin head type and 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including glazing with oil putty ; Complete all as specified and directed by Engineer-in-charge.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 250 mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 150mm long Aluminium handles, cast type anodised ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; Complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Vitrified ceramic light shade tiles 8mm to 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repair vitreous china wash hand basin with pedestal white of size 420x420 mm flat back including bracket, of , Pedestal white, (half or full Threaded) bore dia of discharge pipe 32 mm wt 45 gms and PVC wastw pipe with cup ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing CP health faucet suitable 15 mm dia with lead ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs vitreous china wash done water closet pedestral pattern pan (coupled closet ) white /coloured including vitreous china flushing cystern flush pipe seat, cover cystern cover complete set one pices as required ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore ; Complete all as specified and directed by Engineer-in-charge. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.

Supply and Fixing in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs CP Jet spray suitable for EWC. ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Brass chromium plated Pillar mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes. ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes. ; Complete all as specified and directed by Engineer-in-charge.

Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repairs rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including taking down including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; Complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repairs rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including taking down including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 25mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 20mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 25mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs PVC waste pipe32mm dia fixed to WHB/Urinals ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 100mm dia CP grating with or without hole type ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Plantex Stainlesss steel Folding Towel Rack for bath room/Towel Stand /Hanger size 24 inch Chrome ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs Vitreous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws ; Complete all as specified and directed by Engineer-in-charge.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc. and Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 110 mm PVC (SWR) bends any radius. ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 75 mm PVC floor trap ; Complete all as specified and directed by Engineer-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar. ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and directed by Engineer-in-charge.

Dismantling boarding , any description , fixed in any position with screws. ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Providing and fixing Gypsum board 12 mm thick Seamless calcum silicate in ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with fixed with screw , GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre andas per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. ; Complete all as specified and directed by Engineer-in-charge.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) /fibre sheet and in roof coverings ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Cement concrete type C-2, 1:3:6 using 40mm graded agregate as in foundations, filling and mass concrete ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Fibre glass reinforced translucent sheeting plain 2 mm to 3 mm thick of an colour having tensile strength of as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-charge.

Demolation of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 91 above but except bricks (old dismantled serviceable bricks obtained from Srl item No shall be reused after necessary cleaning of mortar) ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and directed by Engineer-in-charge.

GEE EMM ASSOCIATES

m/s. gopal krishan