Day to day civil maintenance to BSNL T.E. Buildings in Sector-20 TE Sector-17 Sector-49 TE Building Ram Darbar and Nodal centre building RamDarbar Chandigarh for the Year 2025-26 and onwards

Amount

SH: Concrete Work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 20 mm nominal size derived from natural sources)

SH : REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

SH: BRICK. WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in.

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

SH: WOOD AND P. V. C. WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

a) Kiln seasoned and chemically treated Hollock wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

a) Kiln seasoned and chemically treated Hollock wood.

i) 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

a) Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming toIS:3097, grade I.

Deduct for not providing hinges in doors, windows or clerestory window shutters with :

a) ISI marked M.S. pressed butt hinges bright finished of required size

For 2nd class teak wood and other class of wood shutters.

SH :- Steel Work

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Repair and setting right of doors /chowkhats / jaffery gates / grills /compound gates /door spring /door closer by welding by gas or electric plant including transportation of plant at site etc. by replacement of hinges /cram of sliding door bolt /doorsprings /door closer /tower bolts /flat /handles etc.all complete as per direction of Engineer-in-charge.(hinges,door springs, door closer crams of Sliding door bolt/tower bolt/handles shall be paid separately)

Repairs to existing steel rolling shutters by dismantling the shutters, setting it right by removal of dents, tensioning of coil spring, greasing of side guides, straightening of main shaft etc. and refixing the shutters at its proper position and ensuring free operation of shutter all complete as per direction of Engineer in Charge

a) Area up to 10 Sqm

SH :- Flooring

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

a) 40mm thick with 20mm nominal size stone aggregate.

Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.

(a) 18 mm thick.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

a) 40 mm wide and 4 mm thick.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

(a) 25 mm thick.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Ordinary cement without any pigment.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm

SH : Roofing

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3(1 cement : 3 fine sand) as per standard design

In 75x75mm deep chase

SH : Finishing

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

Neat cement punning

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

a) New work (two or more coats) over and including water thinnable priming coat with cement primer.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

a) Two or more coats on new work.

French spirit polishing :

a) Two or more coats on new works including a coat of wood filler.

White washing with lime to give an even shade

a) Old work (two or more coats)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

a) Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

a) One or more coats on old work.

French spirit polishing :

a) One or more coats on old work.

SH : Repairs To Building

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :

With cement mortar 1:4 (1cement: 4 coarse sand).

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Rubbing and polishing of old mosaic flooring with floor grinding machine including removing malba etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Cutting of peepal tree and its branches and roots penetrated into brick masonary and inside Brickmasonry/ tile terracing/RCC surface etc including depressed portion of WC etc and applying chemical to the ends of roots and surfcae all complete as per direction of Engineer-in-Charge

Making opening of 100 to 300 sqcm size in false flooring panel 35mm thick particle board having 2mm thick formica fixed to panel surface and making the side of opeing smooth for housing cables etc. all complete as pe drection of E-in-Charge.

Supplying 1000ml of herbicide /chemical for prevention and growth of Peepal and other vegetation on building surfaces etc all complete as per direction of Engineer-in charge

Providing waterproofing compound B-Guard or equivalent having propeties of cold application ,solar refelective , elastic insulation and bitumen free ready to use as one component all complete as per direction of Engineer-in-Charge.

Making opening of 100 mm dia 100-200 mm depth in in RCC slab by core cutting method and making the side of opeing smooth for housing cables etc. all complete as pe drection of E-in-Charge.

Re-setting of tougned glass door / aluminum door, tightening of cleats etc. replacing of pivots or aluminium hinges or rubber gasket wherever required including steel screws etc. all complete.

Dry cleaning and repair to existing old vertical blinds including replacement of damaged fabric and /or acessories runner etc wherever required all complete as per directions of Engineer-in-Charge. Only the area repaired / drycleaned shall be measured for payment.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

a) With stainless steel cover plate

Providing and fixing 12.5 mm thick Gypsum ceiling board to existing false celing roof frame with necessary screws including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacture's specification including dismantling and disposing off existing old worn out board all complete as per direction of Engineer-in-charge.

Repair to existing gypsum ceiling board false celing joints with necessary screws including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board at both sides of joints, all as per manufacture's specification all complete as per direction of Engineer-in-charge.

SH : Dismantling and Demolishing

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

a) Of area 3 sq. metres and below

b) Of area beyond 3 sq. metres

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

a) Of area 3 sq. metres and below

b) Of area beyond 3 sq. metres

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

SH: ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

SH: - MISCELLANEOUS

Provision of Carpenter services for carrying out Day to day maintenance to BSNL staff quarters in Sector-27C, Sector-30 A, TE Sector-20, TE Sector-17, TE Building Ram Darbar, Nodal center Ram Darbar and TE Sector-49 Chandigarh , complete as per the direction of Engineer-in-Charge (One carpenter to be provided per month with conveyance).

Provision of Mason services for carrying out Day to day maintenance to BSNL staff quarters in Sector-27C, Sector-30 A, TE Sector-20, TE Sector-17, TE Building Ram Darbar, Nodal center Ram Darbar and TE Sector-49 Chandigarh , complete as per the direction of Engineer-in-Charge (One mason to be provided per day with conveyance).

Provision of plumber services for carrying out Day to day maintenance to BSNL staff quarters in Sector-27, Sector-30, TE Sector-20, TE Sector-17, TE Building Ram Darbar, Nodal center Ram Darbar and TE Sector-49 Chandigarh, complete as per the direction of Engineer-in-Charge (One plumber to be provided per month with conveyance).

Provision of beldar services for carrying out Day to day maintenance to BSNL staff quarters in Sector-27C, Sector-30 A, TE Sector-20, TE Sector-17, TE Building Ram Darbar, Nodal center Ram Darbar and TE Sector-49 Chandigarh , complete as per the direction of Engineer-in-Charge (One mason to be provided per day with conveyance).

Provision of sewerman services for carrying out day to day maintenance jobs (i.e Cleaning the chowked manhole to manhole sewer lines including manhole complete with rodding set etc) in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One Sewerman with rodding set and other required tools to be provided per month with conveyance).

Providing ISI marked following items at BSNL Civil Inquiry at #2506, Sector-27C, Chandigarh.

Orissa pan white WC seat 580mm

European WC seat white

Providing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Low level PVC cistern white 10litre

Wash basin 550x440

Wash basin 450x300

C.I./MS brackets for Sink and wash basin

100 mm SCI trap with 1mm inlet and 75 mm outlet

SCI plain bend 100mm

Brass bib cock 15mm dia.(weighing400gm)

Brass stop cock 15mm dia. (weighing 400gm )

PTMT bib cock 15mm dia

PTMT pillar cock 15mm dia

PTMT stop cock 15mm dia

PTMT angle stop cock 15mm dia

Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

50 mm nominal bore.

Ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Pastic ball Cock 15mm with gola & rod (prayag)

Pastic ball Cock 20mm with gola & rod (prayag)

CP brass bib cock 15mm

CP brass bib cock 15mm( with nozzle)

PVC long flush Bend

White vitrous china Kitchen sink 600x450x200 mm

CP brass long nose bib cock 15mm

CP brass shower rose with arm ( Square or round shape 150 mm

CP brass angle valve 15mm

CP brass pillar cock

Stainless steel jet washer with hose pipe for EWC of approved make .

White plastic seat with lid, CP brass hinges and rubber buffers

PVC connection pipe ( prayag or equivalent) 450cm long, 15mm bore

Semi rigid PVC waste pipe 32mm dia.

Semi rigid PVC waste pipe 40mm dia.

Semi rigid PVC waste pipe 50mm dia.

CP brass waste 32mm

CP brass waste 50mm

CP brass bottle trap 32mm( ESS ESS or equivalent)

CI Gully trap cover 300x300mm, 4.50kg weight

Rectangular 455x610mm SCI Manhole cover (low duty) 23kg weight

CI Grating for RWP/Gully trap 150x150 mm

PVC cistern handles

PVC cistern washers

PVC cistern ball cock

PVC washers for taps

Duracell battery 9 V

PVC overhead tank with suitable locking arrangement

GI tank nipple 15mm

Drip seal

Portland cement

White cement (1kg pack)

CP brass floor trap grating with frame 100mm( with hole or without hole)

GI pipe 15mm nominal bore

GI pipe 20mm nominal bore

GI pipe 25 mm nominal bore

GI pipe 40 mm nominal bore

GI union 15mm dia

GI union 20mm dia

GI union 25mm dia

GI union 50 mm dia

GI tee 15mm dia

GI tee 20mm dia

GI tee 25mm dia

GI socket 15mm dia

GI socket 20mm dia

GI elbow 15mm dia

GI elbow 20mm dia

GI elbow 25mm dia

CP brass extension nipple (1/2" x 2")

Mild steel hexa nipple / plug 15mm.

Mild steel hexa nipple / plug 20mm.

GI nipple 15mm dia 150 mm long

GI nipple 15mm dia 100 mm long

GI nipple 15mm dia 50 mm long

GI nipple 20mm dia 230 mm long

GI nipple 20mm dia 150 mm long

GI nipple 20mm dia 50 mm long

Supplying SCI soilwaste and vent single socketed pipe 1.8 m long 100 mm dia

Coarse sand (Zone-III)

Crushed Stone Aggregate 10 mm nominal size

35mm thick flush door shutters with teak wood ply on both sides

35mm thick flush door shutters with commercial veneering both sides

75 x 22mm soft wood (partal) sections

19mm thick commercial block board

6mm thick commercial ply

Float Glass sheet of nominal thickness 4mm thick(weight not less than 10kg per sqm, Cutting/wastage included as per size requirement at site)

Glass sheet 5mm thick(Cutting/wastage included as per size requirement at site)

Hydraulic door closer bottle type MS body

Glass putty

M-seal (pack of 100gms)

Door spring

Magnetic catcher double strip horizontal type.

Aluminium floor door stopper with twin rubber.

Providing metallic decorative 50 mm cupboard or wardrobe knobs with nuts complete

Providing metallic decorative 75 mm cupboard or wardrobe handles with nuts complete

Providing PVC tank cover for over head tank 500 litre capacity

Providing CP brass health faucet ( hand shower plus connection pipe) for European seat of Jaiquar or equivalent i/c extension nipple and CP tee as required to execute the connection all complete as per direction of Engineer-in-charge.

Providing CP brass Towel rod 600 mm

Bevelled edge looking mirror of superior glass 60x45 cm

6mm thick hard board backing

Galvanised wire mesh of average width of aperture 1.4mm and nominal dia. of wire 0.63mm

Glass/acrylic shelf 450x120x5mm with anodised acrylic frame and screws complete.

Aluminium door seal 900mm

Oxidised MS sliding door bolt 250 x 16mm

Oxidised MS tower bolt 250x10mm

Oxidised MS tower bolt 150x10mm

Oxidised MS handle 125mm

Oxidised MS handle 75mm

Anodised aluminium sliding door bolt 250 x 16mm

Anodised aluminium tower bolt 200x10mm

Anodised aluminium tower bolt 150x10mm

Anodised aluminium handle 125mm with plate 175x32mm

Anodised aluminium handle 75mm with plate 125x32mm

PVC rawl plug 40mm long

MS wooden screws 40mm

MS wooden screws 35mm

MS wooden screws 20mm

MS nails all sizes

Nickel plated MS pipe 20mm dia (curtain rods)

Nickel plated MS curtain brackets 20mm

Stainless steel Curtain pipe 25 mm dia

SS curtain brakets 25 mm dia

Fevicol /araldite adhesive

Providing acrylic name plates of size 300x300 mm with writing the required matter with tape of approved colour complete as per the direction of Engineer in Charge.

Providing PTMT liquid soap container of 400 ml capacity

Providing CP brass soap dish of approved make and quality like ESS ESS, ESSCO or equivalent including necessary screws etc. complete as per the direction of Engineer in Charge.

Providing C.P. wall mixer ( of Jaquar or equivalent ) approved quality conforming to IS standards a)15 mm nominal bore.

Providing mirror of superior glass (of approved quality), with synthetic wood frame complete and 4 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing brass phase (Spindle) for pillar tap /CP taps of Excel or eqivalent a)15 mm nominal bore.

Providing CP brass Towel ring

Providing interal fittings/Siphon for PVC Cistern of CERA or equivalent quality

Providing C.P. Wash basin mixer (of Excel or equivalent)approved quality conforming to IS standards a)15 mm nominal bore.

Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 32 mm dia

Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 75 mm dia

Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 110 mm dia

Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 150 mm dia

Providing powder coated / Stainless steel drawer channels 450 mm long

Brass cupboard lock 6 levers of approved quality,

a) 50 mm Size

Providing brass metre coupling of 15mm nominal dia.

Providing clear silicon tubes of approved brand and manufacture & as per the direction of engineer-in-Charge

Providing PVC plain bend (a) 100 mm dia

Providing PVC plain Tee (a) 100 mm dia

Providing PVC Nahani Trap (a) 100 mm dia

Providing Reinforced Cement concrete cover for manhole without frame of size 450x600mm

Providing synthetic enamel paint of approved brand and manufacture

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water (a) 25mm

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water (a) 20mm

Providing Chlorinated Polyvinyl Chloride (CPVC) ball valve (a) 25mm

Providing Chlorinated Polyvinyl Chloride (CPVC) union (a) 25mm

Providing Chlorinated Polyvinyl Chloride (CPVC) union (a) 20mm

Providing Chlorinated Polyvinyl Chloride (CPVC) tank nipple (a) 25mm

Providing Chlorinated Polyvinyl Chloride (CPVC) Tee (Brass) (a) 3/4"x 1/2"

Providing Chlorinated Polyvinyl Chloride (CPVC) Elbow (Brass) (a) 3/4"x 1/2"

Providing Chlorinated Polyvinyl Chloride (CPVC) Male threaded Adapter (MTA) brass (a) 3/4"x1/2"

Providing Brass Ferrule-15mm dia

Supply Providing waterproofing liquid material URP to be used in concrete and cement mortar of asian paint,ultratech or equivalent

Providing auto close hinges of Hettich or equivalent make for kitchen cabinets.

SH: - Credit Items

Credit for old dismantled/unserviceable material .(material to be collected from site or Mtc office sector 27 Chandigarh by the agency): -

a) Old brick bats/brick tile bats

b) Old M.S section/old scrap/M.S rolling shutter/M.S tubes/MS bar etc.

c) Brass bib cock/stop cock/ball valves/CP bibcock/CP stopcock/C.P angle cock/ brass gate valves/CP pillar cock.

d) CP shower rose// CP brass ring/CP brass towel rail etc. of all dia

e) Hydraulic Door Closer/door floor spring :-

f) Unserviceable door/window shutter (wood) i/c fittings

g) Unserviceable door/window shutter with or without chowkhats(steel) i/c fittings

h) PVC Bib cock/stop cock/ball cock/WC seat cover/ internal fitting of low level PVC cistern etc.

i) PVC/China ware low level cistern

j) PVC water storage tanks upto 1000 litres

k) CP waste/CP gating of all sizes

l) PVC Connection/PVC waste pipes

m) Old M.S /aluminium fittings of all sizes like handle, tower bolts, sliding door bolt, door stoppers,window fasteners, window stay, helical door spring , hinges etc.

n) GI pipes and fittings

i) All dia

o) Old Aluminium section/old aluminium scrap etc.

p) Old 12 mm laminated board