Construction of District Environmental Engineer Office building with development works for Tamil Nadu Pollution Control Board at Vadaveeranaickanpatti Village Periyakulam Taluk in Theni District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

13.1) Filling with excavated earth

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

25) Supplying and fixing of MS hold fast

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

51) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52) Supplying and laying of PVC Water supply (ASTM) pipe a. 32 mm dia

b. 25 mm dia

52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)

53.3) Supplying and fixing of C.I. steps (5 Kg)

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.1) Supplying and filling the basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand

3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 20mm thick a. In Stilt / Ground floor

b. In First floor

c. In Second floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40mm thick a. In Foundation & Basement

b. In Stilt / Ground Floor

c. In First Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

f. For Curved surface

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes

21.5.5) Providing of 35mm thick factory made plain pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand

35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4.2) Supplying and applying Wall putty over the new cement plastered walls

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand

52.4) Supplying laying fixing and jointing the following PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI specials c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of porcelin Wash hand basin (White without Pedestal Type), superior variety of size 550x400mm (22”x16”)

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

56.4.3) Supplying and applying of water proofing 3mm thick APP (Atactic Poly Propylene) Membrance in Toilet sunken portion of approved quality by means of gas torching, over the one coat of bitumen primer

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit

80.1) Supplying and fixing of 450x375x20mm T.W. plank

84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

86.1) Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick

87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)

99) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1500 x 2100mm

99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1000 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts bulb lamp for bulk head fittings

105.1) Run off main 4 wires of 4 Sq mm. (EB service connection)

108) Supplying and fixing of 4 Pole RCCB / ELCB 40 Amps 30MA

109) Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection

110.1) Supplying and fixing of Single Pole & Neutral 6A to 32A, 10KA

112.1) Supplying and fixing of Exhaust Fan 225mm dia

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable

115) Labour charges for laying of 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable below ground level

116) Labour charges for laying of 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable above ground level

117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 35 Sqmm brass cable gland

119) Supplying and delivery of 7 HP clear water vertical wet type submersible pumpset three phase suitable for borewell Duty - 50 lpm x 175 m

119.1) Supplying and delivery of 2 HP Centrifugal Monoblock pumpset suitable for borewell Duty - 450 lpm x 20 m

120) Labour charges for erection of submersible pumpset in borewell Above 5 HP to 10 HP

120.1) Labour charges for erection of Horizontal shaft, Centrifugal pumpset upto 3 HP (coupled/monoblock)

121.1) Supplying and fixing of three phase panel board of direct online starter with two level guard and auto start (7 HP)

121.2) Supplying and delivery of Direct online starter with single phasing preventor 2 HP for Monoblock motor

122) Supplying and fixing of following dia of the GI, UPVC & GM specials a) 50mm dia GM Non return valve

b) 50mm dia GM Gate valve

c) 50mm dia GI Union

d) 50mm dia GI Hex Nipple

e) 50 mm dia CI foot valve with stainer

f) 50mm dia GI Tee

g) 50 mm dia GI Bend

h) 50mm dia GI Coupling

i) 50 x 40mm dia GI Reducer Tee

j) 32mm dia GI Union

k) 32mm dia GI Elbow

l) 32mm dia GI Hex nipple

m) 25mm dia GI Coupling

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 25mm dia GI pipe

b) 40mm dia GI pipe

c) 50mm dia GI pipe

125) Supplying and delivery of following dia PVC Pipe a) 32mm dia PVC pipe/10 Kg/cm2

b) 50mm dia PVC pipe/10 Kg/cm2

125.1) Labour charges for laying of GI and PVC pipe below ground level

125.3) Supplying and delivery of 32mm dia UPVC column pipe

129.1) Supplying and fixing in position of Aluminium die casting TNPHC Logo emblem a) 60 cm size

130) Supplying and fixing of Aluminium Dye cast letters a) Aluminium Dye Cast letter 9" size

b) Aluminium Dye Cast letter 6" size

132) Drilling of 150mm dia borewell in hard rock areas

133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe

134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the 150mm dia borewell casing pipe

140) Supplying of 3 to 10mm size HBS jelly etc.,

142) Supplying and laying of Rubber moulded Hydraulic pressed Paver block 83mm thick including labour charges for laying

159.1) Supplying and fixing of three phase DB Box with steel enclosures with cable gland plates for flush/surface mounting with busbars neutral link and each bar (without MCB) etc.

160.1) Supplying and fixing of Rotary handle

164) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

367) Providing wooden melamen polish for main door new wood work

373) Supplying and installation of Air conditioner with copper coil 2 TR split type AC unit 5 star rated

374.1) Supplying and laying of 7/8" Copper Refrigerant pipe (Extra beyond 3 metres supplied with AC unit) in position

374.2) Supply and fixing of MS stand for fixing outdoor unit

374.3) Supply and fixing of water drain pipe line (1” PVC Pipe)

375) Supplying and installation of 5 KVA capacity automatic voltage stabilizer with time delay relay arrangements

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.5.1) Supplying and laying of Granite tiles flooring of size 2'x1', 10mm tk (Ruby red) over cement plastering in CM 1:3 20mm thick using crushed stone sand

379.7) Supplying and fixing of Granite slab of size 4' x 2' 18-20mm tk (Jet Black) for table slab arrangements in CM 1:3, 12mm tk using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

383.2) Providing single nosing to the edges of granite slab for table slab arrangements

384) Supplying and fixing of PVC flushing cistern (wall mounting type) -10 litre capacity

448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap

549) Supply, Erection and Commissioning of 1 No. of Passengers lift (13 Persons - 884 Kgs.)

552) Supply and erection of 250 Amps capcity floor mounting Panel board (cubical type) with bus bar chamber

796) Two coat of Exterior emulsion paint including primer for outer wall surfaces

796.1) Two coat of Plastic emulsion paint including primer for inner wall surfaces

M V PANDI AMMAL

raj engineering constructions

T.M. BUILDERS

J V CONSTRUCTIONS