West Bengal Sdc

Active

Works

CIVIL WORKS

Up gradation of C C Road

MUNICIPAL AFFAIRS DEPARTMENT

Ward No IV | Alipurduar, West Bengal

Amount: ₹19.8 LCloses: 9 Oct 2026

Timeline

Published25 Sept 2026
Closes9 Oct 2026
Bid Opening12 Oct 2026

Corrigenda

Corrigendum

1 updatesLatest on 25 Sept 2026

Tender Value

₹19.8 L

EMD Value

₹39,604

Closing Date

9 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

Executive Officer Alipurduar Municipality

Address

B.F. ROAD ALIPURDUAR

Work Description

Up gradation of C C Road Starting from Near the House of Swapan kanti Saha to House of Chitta Biswas upto 95 Mtr and Near the House of Pulak Talukdar to House of Debasis Goswami upto 90 Mtr and Near the Houe of Malay Paul to House of Dilan Dey Sarkar

Tender Information

Tender ID

2026_MAD_5075400_3

Reference Number

eNIT No 01/ 2026-27/PW 10 / ALIPURDUAR Dated 04.09.2026

Tender Type

Open Tender

Product Category

CIVIL WORKS

Form of Contract

Percentage

Period of Work

30 days

Location

Ward No IV

Source Website

Subscribe to view

Eligibility / Pre-Qualification

PLEASE REFER TENDER DOCUMENTS

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredDRAWING (.pdf)

RequiredNIT (.pdf)

Finance

RequiredBOQ (.xls)

RequiredEMD (.pdf)

RequiredCOST OF TENDER (.pdf)

Fee & Financial Details

Tender Fee Amount

₹3,000

EMD Fee Amount

₹39,604

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

25 Sept 2026

Published

25 Sept 2026

Bid Opening

12 Oct 2026

Download Starts

25 Sept 2026

Download Ends

9 Oct 2026

Submission Starts

25 Sept 2026

Clarification Period

25 Sept 2026 - 9 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401	33.96	Cum	1,751.96	₹59,496.56
2	Surface Dressing,Providing and laying surface dressing as wearing course in single coat using approved crushed stone aggregates of specified size on a layer of bituminous binder of approved grade laid on prepared surface and rolling in accordance with clause 501.6 and 501.7 of MORT&H's specification (Reference to MORT&H's specification clause 509)	1,837.5	Cum	151.26	₹2,77,940.25
3	Tack Coat,Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).	2,887.5	Cum	27.12	₹78,309
4	Open - Graded Premix Surfacing,Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).	2,887.5	Cum	277.12	₹8,00,184
5	Seal Coat,Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511) Providing and laying of premix sand seal coat with bitumen emulsion of suitable approved grade.	2,887.5	Cum	154.31	₹4,45,570.13
6	G.S.T. @ 18%	-	Percentage	0.18	-
7	Labour cess @ 1%	-	Percentage	0.01	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.50 MB

Work Item Documents

BOQ_5165301.xls

BOQ • 0.34 MB

Corrigendum Documents

eNIT.pdf

PDF • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401

33.96

Cum

1,751.96

₹59,496.56

Surface Dressing,Providing and laying surface dressing as wearing course in single coat using approved crushed stone aggregates of specified size on a layer of bituminous binder of approved grade laid on prepared surface and rolling in accordance with clause 501.6 and 501.7 of MORT&H's specification (Reference to MORT&H's specification clause 509)

1,837.5

Cum

151.26

₹2,77,940.25

Tack Coat,Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).

2,887.5

Cum

27.12

₹78,309

Open - Graded Premix Surfacing,Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).

2,887.5

Cum

277.12

₹8,00,184

Seal Coat,Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511) Providing and laying of premix sand seal coat with bitumen emulsion of suitable approved grade.

2,887.5

Cum

154.31

₹4,45,570.13

G.S.T. @ 18%

Percentage

0.18

Labour cess @ 1%

Percentage

0.01