SPECIAL REPAIR TO BLDG NO 437 (TST OR LIVING ) AND P- 1110 (TDN SHOP AT 216 TRANSIT CAMP AT SRINAGAR

Amount

S&F for Galvanized corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc incl dismantling of old corrugated steel sheeting, any gauge, thickness, complete all as specified and directed.

S&F for Plain, galvanised, 0.63mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl dismantling of old plain sheeting ,any gauge, thickness, complete all as specified and directed.

M&L for Pre Polished Machine cut kota stone slab (Mirror finish) flooring 18-20 mm thick over cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.specified.

M&L for Pre Polished Machine cut Kota stone slab (Mirror finish) 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm cement plaster in CM 1:4 incl roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

M&L for Pre Polished Green Marble work 18 to 20mm thick in steps, jambs, pillars, windowcills, cooking platforms, cupboards and like is sealed down with an approved adhesive including scarification of surfaces of old wooden steps/riser by picking, sweeping clean to remove dust, etc, complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for painting of new steel surfaces of any description, over 10cm in width or girth,not otherwise described incl preparation of new surfaces, a coat of red oxide primer and 02 coats of synthetic enamel paint (G+2 roofs) , complete all as specified and directed.

M&L for painting of old steel surfaces of any description, over 10cm in width or girth,not otherwise described incl preparation by complete removal of paint, a coat of red oxide primer and 02 coats of synthetic enamel paint (G+2 roofs), complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from frames) n exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from frames) exc 1.5 Sqm each but n.exc 4 Sqm each, complete all as specified and directed.

S&F for 2nd class hard-wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton window shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) , complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton window shutters open rebated and prepared to receive gauze etc (but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) , complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F 75 mm stainless steel Butt hinges, medium weight, and fixed , complete all as specified and directed.

S&F 100 mm alumnium handles cast type all as specified and directed, complete all as specified and directed.

S & F 100mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) , complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled door shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps, in repairs to replace old or decayed boarding in patches, including cutting out old, piecing, heading joints etc., and removing dismantled boarding to store, complete all as specified and directed.

M&L for 2nd class hardwood, 20 mm thick, clean sawn boards or planks, width n exc. 25 cm fixed to external face of bldg/ floor of first floor/ceilings with suitable wooden frame work complete including dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L two coats of synthetic enamel on new/unpainted surfaces of wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of new or previously treated surface, complete all as specified and directed.

M&L for preparation of old wood and wood based surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete as specified and directed.

M&L for preparation of old wooden/steel surfaces plain moulded,n exc 10cm width or girth when unconnected with other painting or when paineted in a different tint and applying a coat of synthetic enamel paint complete as specified and directed.

S&F for Second class hard-wood (clean Sawn) in scantlings for supports of wall panelling or any where required on site, including dismantling timber scantlings 40 sq. cm and over in section, in any position , complete all as specified and directed.

Description all as per serial item No 26 above but except timber, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil, complete all as specified and directed.

Taking down shutters exc 1 sqm and n.exc 2 sqm each, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 100 mm stainless steel Butt hinges, medium weight, and fixed, complete all as specified and directed.

S&F 150 mm alumnium handles cast type, complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 200 mm long

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 4.5mm thick Linoleum, plain coloured, laid/sealed down with an approved adhesive in floors including stretching, cutting and fitting, over and including levelling of floor with wooden powder (burada) mixed with suitble adhesives where required before laying of linoleum sheets, complete all as specified and directed.

S&F for 6 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, joints filled properly before painting incl taking down old wall/ceiling boards of any thickness and description, complete all as specified and directed.

M&L for Glazed Ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes, including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick CM 1:3, including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

S&F in repair for Vitreous China Urinal, Half stall type, white complete with fittings, coupling & waste pipe etc, complete all as specified and directed.

S & F in repair vetreous china wash down water closet pan (pedestal pattern) white including 10 ltr PVC flushing cistern and flush pipe and PVC connection 15mm with PTMT nuts of length 450/600mm as suitable, complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 ltr PVC flushing cistern and flush pipe and PVC connection 15mm with PTMT nuts of length 450/600mm as suitable, complete all as specified and directed.

S&F, in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer fixed in repair, complete all as specified and directed.

S&F in repair 15 mm Bib taps, CP Fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15 mm angle valve/stop valves, CP Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe etc, complete all as specified and directed.

Providing 4 to 5mm thick looking mirror fancy type having border of designer etching as approved by user, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) , complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling old existing tank, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling old existing tank, complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls/trenches or in floors incl all Tees, elbows, sockets etc fittings, complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls/ trenches or in floors incl all Tees, elbows, sockets etc fittings, complete all as specified and directed.

S&F in repair 40 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl all Tees, elbows, sockets etc fittings, complete all as specified and directed.

S& F PVC ( SWR ) floor/nahani trap plain with grating including jointing with solvent cement of 110mm/75 mm dia etc, complete all as specified and directed.

S&F 40 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store, complete all as specified and directed.

S&F 32 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store, complete all as specified and directed.

S&F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store, complete all as specified and directed.

S&F 40 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F 32 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F 20 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F in repair 28-30 mm dia Curtain Rods, mild steel (coloured - in wood finish or any other colour approved by user) with suitable fixing brackets and 02 x decorative Finials for each curtain rod and all other accessory , complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 ,complete as specified and directed.

M&L for Plain Cement concrete type D- 2, 1:4:8 (using 40mm graded crushed stone aggregate) as mass concrete in fdn, base/sub base etc, complete all as specified and directed.

M&L for 25 mm thick Plain Cement concrete type B- 1, 1:2:4 (using 20mm graded crushed stone aggregate) as a levelling course in floors, complete all as specified and directed.

M & L for Chequered cement concrete tiles 30cm X 30cm X 25cm thick, with gray cement and no pigments set, jointed in neat cement slurry in floors over and including 15mm thick screed bed as bedding layer CM 1:4, complete all as specified and directed.

M&L for plain cement concrete, type B1, 1:2:4 (20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including form work, complete all as specified and directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manholes covers set in CM 1:4 including necessary form work complete all as specified and as directed. Note :-Reinforcement will be measured and paid separately, complete all as specified and directed.

Excavating in trenches (Manual) n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

M&L for Plain Cement Concrete bed to drain pipes of 150 mm dia in cement concrete 1:4:8 type D2 including forming cradles, complete all as specified and directed.

M&L for Reinforced concrete pipes 150 mm dia, class NP2, laid and jointed complete with collars, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, including demolition of brickwork or stone/boulder masonry built in cement mortar, complete all as specified and directed.

M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, including demolition of brickwork or stone/boulder masonry built in cement mortar, complete all as specified and directed .

M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, including dismantling brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but except bricks, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, surfaces to be prepared to even and smooth without using extra cement , complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces, complete all as specified and directed.

M & L for preparation of old surfaces of wall and applying two coats oil bound distemper smooth finish including application of wall putty wherever reqd to make up for undulations/cracks etc, complete all as specified and directed.

M & L for preparation of old surfaces of wall and applying two coats of white wash, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete sur faces I ncement mortar 1 :6, surface finished even and smooth without using extra cement, including taking down old cement plaster from brick/stone work, complete all as specified and directed.

M & L for preparationof new surfaces of wall and applying two coats oil bound distemper over coat of primer, smooth finish, complete all as specified and directed.

Providing precast cement concrete louvers and jallies, 35mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) including disamantling of old louvers and jallies ofany type and size, complete all as specified and directed.

M & L for preparationof new surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces incl preparation/scarification, complete all as specified and directed.

S & F Hollow PVC Wall lining /panelling on walls and ceilings consisting of 5mm thick Plain colour PVC sheet incl all PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall/ceiling with suitable frame work incl dismantling of old wall panels , complete all as specified and directed.

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit , complete all as specified and directed.

Dismantling unserviceable main switch/DBs with MCBs , complete all as specified and directed.

Taking down carefully electric water heater from site and deposit it in MES store yard , complete all as specified and directed

M&L for single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe or PVC Casing capping ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of suitable sizes of modular boxe and modular plates of suitable way mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc , complete all as specified and directed.

Description all as per serial item No 95,but one light point / fan point wiring system controlled by one way switch , complete all as specified and directed.

Description all as per serial item No 95, but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch , complete all as specified and directed.

Description all as per serial item No 95, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch , complete all as specified and directed.

Description all as per serial item No 95 but two 2 way piont and controlled by one two way switch point wiring system , complete all as specified and directed.

Description all as per serial item No 95 but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system , complete all as specified and directed.

Description all as per serial item No 95 but using single run of PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 4.0 sqmm ( Nominal area ) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as continious , complete all as specified and directed.

Supply and fixing of modular type switch 5/6 Amps 220 Volts AC, one modular, complete all as specified and directed.

Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two module , complete all as specified and directed.

Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one modular, complete all as specified and directed.

Supply & fixing of modular type socket 5/6 Amps 220 Volts AC, 5/6 multi pin type with two module , complete all as specified and directed.

Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , 2 way , complete all as specified and directed.

Supply and fixing of one/ two modular type step type electronic fan regulator with having free step along with speed control know , complete all as specified and directed.

Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed.

Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type, complete all as specified and directed.

Supply and fixing in replacment of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting, complete all as specified and directed.

Supply and fixing in replacement of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and makong electric connection and including taking down of old fitting , complete all as specified and directed.

Supply and fixing in replacement of LED street light fitting of rated capacity 25 Watt 230 volt AC fixed in Bldg outside with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.0 mtr long of sizes 25 mm dia and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting , complete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed, complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs , complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs , complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB , complete all as specified and directed.

Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB , complete all as specified and directed.

Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB, complete all as specified and directed.

Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 16 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Supply and fixing electric geyser storage type steel body with copper inner tank and heating element upto 2 KW suitable for capacity 25 Litre.BEE 5 star rated complete with all accessories such as safety valve, thermostate , NRV < PVC Connection and fixed to wall with MS fastner , nut bolts and making electric connection, complete all as specified and directed.

Supply and fixing star rated electric ceiling fan 1200mm sweep min air delivery 210 CDm with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC) of single phase 230 volt AC alongwith blade , down rod, canopy, clamps with reel insulator , electronic regulator and accessories and MS fan hook fixed in ceiling/roof including providing flate flexible copper wire and making all electrical connection , complete all as specified and directed.

Supply fixing and comissioning and testing of star rated of electric ventilation exhaust fan of size 300 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work

S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore, complete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 25 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand (Locally available river sand) 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches, below and above / around UG cable for cable protection, complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed.

M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of , complete all as specified and directed.

Notes :- An amount of Rs. 98662.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

GHULAM NABI GILKAR AND CO (BID ID -3423439)

M/S D N Enterprises (BID ID -3429775)

M/S AIJAZ ENTERPRISES (BID ID -3423430)

Alishan Builders (BID ID -3430102)

Concept Engineering & Constructions (BID ID -3423387)

M/S SK ATLANTIC ENTERPRISES (BID ID -3429701)

M/S TAJ DIN KHARI (BID ID -3423183)

M/S U.K. ENTERPRISES (BID ID -3422477)

M/S PARVEZ AHMAD LONE (BID ID -3422782)