SPECIAL REPAIR TO THE AMN HOUSE (BURR ROAD NO. 03) NIRIKSHAN VIHAR AT CQA (AMN), KHADKI.

Dismantling single or double layer mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed.

Material and labour for roof tiles, mangalore Pattern, inter locking at side joints laid dry complete all as specified and as directed.

Supply and fix ridge or hip tiles to suit mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and directed.

Supply and fix 0.63mm thickness galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and as directed.

Supply and fix for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 0.80mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and as directed.

Supply and fix second class hard wood clean sawn battens at 30 cm centre to centre and sectional area exceeding 15 and not exceeding 25 Sqcm including dismantling Battens for tiles ,singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.

Supply and fix 2nd class H/W plain fillets, rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm including dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.

Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work.

Supply and fix 2nd class hard wood 20mm thick, boarding in roofs, ceilings, partitions, fascia barge, soffits (except flooring and skirting) planned one side, and similar work including dismantling complete all as specified and as directed.

Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specifed and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation,PVC Panelling etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specifed and as directed.

Supply and fix E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, complete all as specified and as directed.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Supply and fix factory made solid PVC Door frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. square tube etc complete all as specified and as directed.

Supply and fix for factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification and drawing etc complete all as specified and as directed.

Supply and fix butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles 150mm long in size , fabricated type,anodised complete all as specified and as directed.

Supply and fix aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as directed.

Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.

Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.

Supply and fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match etc complete all as specified and as directed.

Supply and fix for 30mm thick 1st class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Material and labour for for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil), complete all as specified and as directed.

Material and labour for for providing cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, complete all as specified and as directed.

Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specifed and as directed.

Supply and fix brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for for brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed.

Material and labour for for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with finishing even and smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key and scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed.

Material and labour for for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed.

Material and labour for for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed.

Material and labour for for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork complete all as specifed and as directed.

Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Chalk whiting, on plastered surfaces, preparatory on wall complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty 3mm thick to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) and removing the debris outside the defence land complet all as specified and as directed.

Material and labour for for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match complete all as specified and as directed.

Material and labour for for glazed coloured ceramic tiles external/Internal in vertical surface 300mm x 450mm x7mm / 300mm x 600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for for vitrified tiles dark shade 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Description all as per ser item No 42 but in skirting, dado and pillar in vertical surface laid over and incl 10mm thick rendering in CM 1:4 and pointied in white or coloured cement to match complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed.

Material and labour for for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and fix in repairs for vitreous china table top/Under counter wash basin, white or ivory colour flat back or ovel type, size (620x450x175mm) excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand stand but exclusive of fixing of suppy and waste pipe etc fixed complete all as specified and directed. (SINATRA Cat No. A2020109) (Make : CERA)

Supply and fix in repair vitreous china one piece EWC standard size (720x370x760mm) white/ivory colour with dual flushing cistern white including 'P' or 'S' trap fixed as complete all as specified and as directed. (Cat No . A1014112) (Make : CERA)

Supply and fix in repairs for fancy pillar cock with aerator , cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed. (Cat No. F 1016101) (Make : CERA)

Supply and fix in repairs 2- Way bib cock, chromium plated with side handle, wall flange and aerator screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed. (Cat No . F 1099161) (Make : CERA)

Supply and fix in repairs for chromium plated brass angle valve with wall flange for 15mm bore pipe, fixed complete all as specifed and as directed. (Cat No. F 1099201) (Make. CERA)

Supply and fix in repair for 20mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed.

Supply and fix in repairs wall mixer telephonic type chromium plated with CP wall flange complete all as specifed and as directed.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinal fixed complete all as specifed and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed.

Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed.

Supply and fix in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specifed and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) bends, or similar fitting are required to make the system functional complete all as specifed and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed.

Material and labour for for 75mm bore PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20 mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix for health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifed and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specifed and as directed.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc complete all as specifed and as directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc as specified and directed. for the following: One light point /fan/Ex fan/bell point controlled by one switch

Description all as per item No. 70 above but for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area

Description all as per item No. 70 above but for one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area

Description all as per item No. 70 above but for one 3/6 pin socket outlet 15/16 Amps independent Board with cable of size 2.5 sqmm nominal area.

Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed by Engr-in-Charge. NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Description all as per item No 06 above but size of cable 2.5 sqmm all as specified and directed.

Supply and fix modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed.

Supply and fix modular bell push, 5/6 Amps, 1/2 module (ISI marked) complete all as specified and as directed

Supply and fix modular socket, 5/6 Amps, multi pin (ISI marked) complete all as specified and as directed .

Supply and fix modular switch 1 way, 16 Amps, 1 module (ISI marked) complete all as specified and as directed.

Supply and fix modular socket, 6/16 Amps, multi pin (ISI marked) complete all as specified and directed .

Supply and fix bell, AC 230 V, single pole complete all as specified and directed.

Supply and fix modular type fan regulator 120 Watt, 2 module complete all as specified and directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fix ceiling rose surface bakelite three terminal all incl dismentling taking down unsv one complete all as specified and directed.

Supply and fix sheet metal enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC of Make Schneider /ABB/Legrand or eqvt complete all as specified and as directed.

Supply and fix vertical MCCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and as directed.

Supply and fix MCCB 63 Amps, 4 Pole, 16 KA complete with connection, testing and commissioning all as specified and as directed.

Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve of Make Schneider / Legrand/ABB or eqvt

Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve of MAKE- Schneider / Legrand/ABB or eqvt.

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder incl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix wall light 15 watt, aesthetically design with B22/E27 lamp holder complete with all accessories and connecting up with three core copper cable from ceiling rose incl dismentling taking down unsv one complete all as specified and as directed .

Supply and fix LED building security light 35 watt, 230V, with lens, PF > 0.95 complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and as directed .

Supply and fix recess mounted LED panel, 36 watt ( 2'x2'), highly efficient suitable for celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and as directed . MAKE :- Wipro Cat Part -CRCO10R036HP57G3 or techno commercial equivalent in CG/Havells

Taking down ceiling fan, dismantling blades and removing blades and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing the same with all new fitting like down rode with hook (suitable length (12" to 72") reqd at site), Canopy, washer, nut & bolt , locking pin etc. complete all as specified and as directed .

Material and labour for PVC insulated, PVC sheathed twin core 1100 volts grade, 04 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and as directed .

Material and labour for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.