Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.0 Cr
EMD Value
₹8.0 L
Closing Date
25 May 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Boundary Wall, Security Room and Gate Complex at Institute of Chemical Technology-Indian Oil Odisha Campus, Bhubaneswar (ICT-IOCB)
NBCC/ODISHA/ZO/NIT/23-24/001
NBCC/ODISHA/ZO/NIT/23-24/001
Open Tender-Domestic
Civil Works General
Khordha, Odisha
₹11,800
₹8.0 L
25 May 2023
11 May 2023
25 May 2023
25 May 2023
5 Jun 2023
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Excavation work by mechanical means (Hydraulic
excavator)/ manual means in foundation trenches
or drains (not exceeding 1.5m in width or 10 sqm
on plan), including dressing of sides and ramming
of bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soils as directed, within a
2.8.1 All kinds of Soil Cum 707.40 286.85 202917.69
2.9.2 Hard rock (requiring blasting) Cum 707.40 846.25 598637.25
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
2 2.25 layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming and watering,
lead up to 50 m and lift upto 1.5 m.
Ground Floor (Compound Wall) Cum 3537.00 253.95 898221.15
Supply of Good Earth,Carriage for 5.0 km lead by
NSR Mechanical Transport including loading, Unloading
and compaction and stacking.
Supplying and filling, in plinth with jamuna sand
3 2.27 under floors including, watering, ramming Cum 182.25 2161.20 393878.70
consolidating and dressing complete.
Providing and laying in position cement concrete
4 4.1 of specified grade excluding the cost of centering
and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from
natural sources)
Brick work with common burnt clay F.P.S. (non
5 6.1 modular) bricks of class designation 7.5 in
foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 414.00 6658.25 2756515.50
Brick work with non modular fly ash bricks
conforming to IS:12894, class designation 10
average compressive strength in super structure
above plinth level up to floor V level in :
6.34.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2130.30 7676.30 16352821.89
Centering and shuttering including strutting,
propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for
Lintels, beams, plinth beams, girders, bressumers
and cantilevers
Columns, Pillars, Piers, Abutments, Posts and
Reinforced Cement Concrete
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing and laying in position ready mixed or
site batched design mix cement concrete for
reinforced cement concrete work; using coarse
aggregate and fine aggregate derived from
natural sources, Portland Pozzolana / Ordinary
Portland /Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to
accelerate / retard setting of concrete, to improve
durability and workability without impairing
strength; including pumping of concrete to site of
8 5.33 laying, curing, carriage for all leads; but excluding
the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-
charge; for the following grades of concrete. Note:
Extra cement up to 10% of the minimum specified
cement content in design mix shall be payable
separately. In case the cement content in design
mix is more than 110% of the specified minimum
cement content, the contractor shall have
discretion to either re-design the mix or bear the
cost of extra cement.
8.1 5.33.1 All works upto plinth level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
8.2 5.33.2 All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
Steel reinforcement for R.C.C. work including
9 5.22 straightening, cutting, bending, placing in position
and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-
Plastering work
Providing 12mm. Thick cement plaster in cement
mortar or mix(1:6) in all floors at all height with
cement & screened and washed sharp river sand
for mortar and finished smooth to the rough
surface of the brick masonary walls after racking
out the joints (alongwith providing grooves
wherever necessary) including watering and
curing,rounding of corners etc. complete with
cost, conveyance, loading, unloading, royalities
and taxes of all materials,cost of all labour,T&P,
and scaffolding required for the work etc. as
directed by the Engineer-in-charge.
Applying one coat of water thinnable cement
11 13.43 primer of approved brand and manufacture on
11.1 13.43.1 Water thinnable cement primer
Finishing walls with Premium Acrylic Smooth
12 13.47 exterior paint with Silicone additives of required
New work (Two or more coats applied @ 1.43
12.1 13.47.1 ltr/10 sqm over and including priming coat of
exterior primer applied @ 2.20 kg/10 sqm)
Finishing walls with textured exterior paint of
required shade :
New work (Two or more coats applied @ 3.28
13.1 13.45.1 ltr/10 sqm) over and including priming coat of
exterior primer applied @ 2.20kg/10 sqm
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Fencing with angle iron post placed at required
distance embedded in cement concrete blocks,
every 15th post, last but one end post and corner
post shall be strutted on both sides and end post
on one side only and provided with horizontal lines
and two diagonals interwoven with horizontal
14 16.18.1 wires, of barbed wire weighing 9.38 kg per 100 m Rmt 3000.00 19.60 58800.00
(minimum), between the two posts fitted and
fixed with G.I. staples, turn buckles etc. complete.
(Cost of posts, struts, earth work and concrete
work to be paid for separately). Payment to be
made per metre cost of total length of barbed wire
used.With G.I. barbed wire
Supplying at site Angle iron post & strut of
required size including bottom to be split and bent
15 16.19 at right angle in opposite direction for 10 cm kg 4000.00 99.95 399800.00
length and drilling holes upto 10 mm dia. etc.
Diluting and injecting chemical emulsion for POST-
CONSTRUCTIONAL antitermite
treatment (excluding the cost of chemical
Diluting and injecting chemical emulsion for POST-
CONSTRUCTIONAL antitermite
treatment (excluding the cost of chemical
With Chlorpyriphos/ Lindane E.C. 20% with 1%
SUB TOTAL (A) Rs. 69711326.16
SECURITY ROOM AND GATE COMPLEX
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5
m in width or 10 sqm on plan), including dressing
of sides and ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as directed,
within a lead of 50 m.
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
2 2.25 layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming and watering,
lead up to 50 m and lift upto 1.5 m.
Ground Floor (Compound Wall) Cum 162.42 253.95 41247.60
Supplying and filling, in plinth with jamuna sand
3 2.27 under floors including, watering, ramming
consolidating and dressing complete.
Providing and laying in position cement concrete
4 4.1 of specified grade excluding the cost of centering
and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from
natural sources)
Brick work with common burnt clay F.P.S. (non
5 6.1 modular) bricks of class designation 7.5 in
foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 13.32 6658.25 88687.89
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Brick work with non modular fly ash bricks
conforming to IS:12894, class designation 10
average compressive strength in super structure
above plinth level up to floor V level in :
6.34.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 121.98 7676.30 936382.71
Centering and shuttering including strutting,
propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for
Lintels, beams, plinth beams, girders, bressumers
and cantilevers
Columns, Pillars, Piers, Abutments, Posts and
Suspended floors, roofs, landings, balconies and
access platform
Providing and laying in position ready mixed or
site batched design mix cement concrete for
reinforced cement concrete work; using coarse
aggregate and fine aggregate derived from
natural sources, Portland Pozzolana / Ordinary
Portland /Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to
accelerate / retard setting of concrete, to improve
durability and workability without impairing
strength; including pumping of concrete to site of
11 5.33 laying, curing, carriage for all leads; but excluding
the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-
charge; for the following grades of concrete. Note:
Extra cement up to 10% of the minimum specified
cement content in design mix shall be payable
separately. In case the cement content in design
mix is more than 110% of the specified minimum
cement content, the contractor shall have
discretion to either re-design the mix or bear the
cost of extra cement.
5.33.1 All works upto plinth level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
12 5.33.2 All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
Steel reinforcement for R.C.C. work including
13 5.22 straightening, cutting, bending, placing in position
and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-
18 mm cement plaster in two coats under layer 12
mm thick cement plaster 1:5 (1 cement : 5 coarse
sand) finished with a top layer 6 mm thick cement
plaster 1:6 (1 cement : 6 fine sand).
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing 12mm. Thick cement plaster in cement
mortar or mix(1:6) in all floors at all height with
cement & screened and washed sharp river sand
for mortar and finished smooth to the rough
surface of the brick masonary walls after racking
out the joints (alongwith providing grooves
wherever necessary) including watering and
curing,rounding of corners etc. complete with
cost, conveyance, loading, unloading, royalities
and taxes of all materials,cost of all labour,T&P,
and scaffolding required for the work etc. as
directed by the Engineer-in-charge.
13.1.2 1:6 (1 cement: 6 fine sand)
Providing 6 mm thick cement plaster with cement
mortar of mix (1:3) with screened and washed
sharp sand for mortar and finished smooth to
R.C.C. work after closed deep chipping & slurry
treatment including watering and curing, rounding
16 13.16 of corners, providing grooves where ever
necessary with cost, conveyance, royalties and
taxes of all materials with cost of all labour, T&P,
and scaffolding required for the work etc.
complete in all respect as directed by the Engineer
13.16.1 1:3 (1 cement: 3 fine sand)
Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
17 11.41 make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joints with white
cement and matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes
(thickness to be specified by manufacturer), with
water absorption less than 0.08 % and conforming
to I.S. 15622, of approved make, in all colours &
18 11.46 shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white
cement & matching pigments etc. complete.
11.46.2 Size of Tile 600x600 mm
Providing and laying Ceramic glazed floor tiles of
size 300x300 mm (thickness to be specified by
the manufacturer) of 1st quality conforming to IS
: 15622 of approved make in colours such as
19 11.37 White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement : 4
Coarse sand), Jointing with grey cement slurry @
3.3 kg/sqm including pointing the joints with white
cement and matching pigment etc., complete.
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing and fixing 1st quality ceramic glazed
floor tiles conforming to IS :15622 (thickness to
be specified by the manufacturer ) of approved
make in all colours, shades except burgundy,
bottle green, black of any size as approved by
Engineer-in-Charge in skirting, risers of steps and
dados over 12 mm thick bed of cement Mortar 1:3
(1 cement: 3 coarse sand) and jointing with grey
slurry @ 3.3kg per sqm including pointing in white
cement mixed with pigment of matching shade
Providing and laying Polished Granite stone
flooring in required design and patterns, in linear
as well as curvilinear portions of the building all
complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry
and pointing with white cement slurry admixed
with pigment of matching shade including rubbing
, curing and polishing etc. all complete as
specified and as directed by the Engineer-in-
Polished Granite stone slab colour of Black,
Cherry/Ruby Red or equivalent
Providing and fixing M.S. grills of required pattern
in frames of windows etc.
21 9.48 with M.S. flats, square or round bars etc. including
priming coat with approved
steel primer all complete.
9.48.1 Fixed to steel windows by welding Kg. 1926.00 181.00 348606.00
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position with hold fast lugs or
with dash fasteners of required dia & length (hold
fast lugs or dash fastener shall be paid for
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I)
decorative type, core of block board construction
23 9.20 with frame of 1st class hard wood and well
matched teak three ply veneering with vertical
grains or cross bands and face veneers on both
faces of shutters.
35 mm thick Fixing with hinges of required size
9.20.1 and necessary screws (Note: Hinges and
necessary screws hall be paid separately)
Providing and fixing bright finished brass 100 mm
mortice latch with one dead bolt and a pair of
lever handles of approved quality with necessary
screws etc. complete.
Providing and fixing bright finished brass tower
25 9.74 bolts (barrel type) with necessary screws etc.
Providing and fixing bright finished brass handles
with screws etc. complete:
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing and fixing Fiber Glass Reinforced plastic
(FRP) Door Frames of cross-section 90 mm x 45
mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness. The laminate
shall be moulded with fire
27 9.121 resistant grade unsaturated polyester resin and
chopped mat. Door frame laminate shall be 2mm
thick and shall be filled with suitable wooden block
in all the three legs. The frame shall be covered
with fiber glass from all sides. M.S. stay shall be
provided at the bottom to steady the frame.
28 9.122 Providing and fixing to existing door frames.
30 mm thick Fiberglass Reinforced Plastic (F.R.P.)
flush door shutter in different plain and wood
finish made with fire retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP
laminate all around, with suitable wooden blocks
inside at required places for fixing of fittings and
polyurethane foam (PUF)/Polystyrene foam to be
used as filler material throughout the hollow
panel, casted monolithically with testing
parameters of F.R.P. laminate conforming to table
- 3 of IS: 14856, complete as per direction of
Engineer-incharge.
Providing and fixing aluminium tower bolts, ISI
marked, anodised (anodic coating not less than
29 9.97 grade AC 10 as per IS : 1868 ) transparent or
dyed to required colour or shade, with necessary
screws etc. complete :
Gr. Floor Each 4.00 75.55 302.20
Providing and fixing IS : 12817 marked stainless
30 9.70 steel butt hinges with stainless steel screws etc.
Providing and fixing aluminium handles, ISI
marked, anodised (anodic coating not less than
31 9.100 grade AC 10 as per IS : 1868) transparent or
dyed to required colour or shade, with necessary
screws etc. complete :
Gr. Floor Each 8.00 60.05 480.40
Providing and fixing aluminium pull bolt lock, ISI
marked, anodised (anodic coating not less than
32 9.98 grade AC 10 as per IS : 1868) transparent or
dyed to required colour and shade, with necessary
screws bolts, nut and washers etc. complete.
Gr. Floor Each 8.00 89.90 719.20
33 13.50 Applying priming coat:
With ready mixed pink or Grey primer of approved
33.1 13.50.1 brand and manufacture on wood work (hard and Sqm 12.76 61.45 784.10
With ready mixed red oxide zinc chromate primer
33.2 13.50.3 of approved brand andmanufacture on steel Sqm 33.12 55.50 1838.16
galvanised iron/ steel works
Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
Applying one coat of water thinnable cement
35 13.43 primer of approved brand and manufacture on
13.43.1 Water thinnable cement primer
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing and applying white cement based putty
of average thickness 1 mm, of approved brand
36 13.80 and manufacturer, over the plastered wall surface
to prepare the surface even and smooth
Wall painting with premium acrylic emulsion paint
of interior grade, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including
applying additional coats wherever required to
achieve even shade and colour.
13.83.2 Two coats
Finishing walls with Premium Acrylic Smooth
38 13.47 exterior paint with Silicone additives of required
New work (Two or more coats applied @ 1.43
13.47.1 ltr/10 sqm over and including priming coat of Sqm 1321.92 162.35 214613.71
exterior primer applied @ 2.20 kg/10 sqm)
Finishing walls with textured exterior paint of
required shade :
New work (Two or more coats applied @ 3.28
13.45.1 ltr/10 sqm) over and including priming coat of
exterior primer applied @ 2.20kg/10 sqm
Providing and fixing Sliding system window
fabricated from roll formed section made of
galvanized steel colour coated powder coated
(base steel as per IS 513 'D' quality galvanized as
per IS 277 with zinc of 120 GM/Sq.mtr) with total
coated thickness of 0.58 mm ,Coated section
should be with primer coat of epoxy primer of 5-7
microns thick,finish painted with polyester paint of
12-16 microns thick and back coated with alkyd
backer of 5-7 micronsor powder coated with pure
polyster powder up to 50-60 microns thick,
dimension section for outer frame 2 track should
be of 59 x44 mm, section for shutter should be of
35 x 49 for window .Section for Euro Groove
should be 25 x 24 and for lap strip should be 30
x41 mm,Glass shutter should be provided with a
Glass of 5MM and with all accessories and also
other hardware items and all complete as per
architectural drawings and the direction of the
Engineer -in- charge.
SUB TOTAL (B) Rs. 7923725.42
ELECTRICAL WORK
Internal Electrical work
Supplying the following Size PVC insulated PVC
1 seathed Alluminium aromour cable of 1.1 kV
grade as per IS 1554 etc as reqd.
c) 3 core 1.5 sq.mm weather proof sub mersible
Laying of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of
2 7.1 following size direct in ground including
excavation, sand cushioning, without protective
covering and refilling the trench etc as required.
2.1 7.1.1 a) Size not exceeding 35 sq.mm mtr 1500.00 323.00 484500.00
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Laying of one number additional PVC insulated
and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size direct in ground in the
3 7.4 same trench in one tier horizontal formation
including excavation, sand cushioning, but
excluding protective covering and refilling the
trench etc as required.
3.1 7.4.1 a) Size not exceeding 35 sq.mm mtr 300.00 105.00 31500.00
Laying of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL
pipe as required.
7.5.1 a) Size not exceeding 35 sq. mm mtr 50.00 31.00 1550.00
Supplying and making end termination with brass
compression gland and aluminium lugs for
5 following size of PVC insulated and PVC sheathed /
XLPE aluminium conductor cable of 1.1 KV grade
Provisin and making CC foundation of 1:2:4
cement/Sand/Stone agreegate, suitable for
erection of above street light pole with neat
6 plastering the surface, curing the surface, nos 3.00 995.00 2985.00
including excavation of soil, refilling, spreading the
extra soil to a distance of 50 meter away i/c
cleaning the site etc as reqd.
S/F 210 x 190 x 75 mm PVC loop in loop put box
with sitable mountig arrangement on tubular poles
6 for connection of cable including supplying and mtr 2300.00 32.00 73600.00
fixing 10A MCB, neutral link, earth bar, making
connection etc as reqd.
Supplying and laying 8 SWG dia GI wire along
with cables in exsting surface/ cable trench
including making connection for loop earthing as
Supplying and Fixing GI octagonal pole with built
in loop box, suitable earthing terminal,
(Galvanisation shall be as per relevant IS) of
following specification and as per IS: 2713 ( Part –
I, III ) : 1980 and of tested quality of steels of
minimum tensile strength 540 MPa suitable for
fixing the street light i/c transportation, painting
with minimum 2 coat of silver oxide paint,
earthing the body testing, commissiong etc as
reqd. Poles shall be well-finished, clean and free
from harmful surface defects. Ends of the
polesshall be cut square. Poles shall be straight,
smooth and octagonal. No weld joints permitted,
if any,shall be of good quality, free from scale,
surface defects, cracks, etc with permission of
Engineer in charge.
Note : No circumferential joints shall be permitted
If welded tubes are used they shall have one
longitudinal weld seam only : and the longitudinal
welds shall be staggered at each swaged joint.
7.0 mtr Pole with GI Base plate of minimum 12
mm Thick, Wt - 87 kg.
Supplying and Fixing the following size medium
gauge GI mast arm pole bracket for fixing the
luminair on the existing pole structure of approved
design including making suitable fixing
arrangement, with supplying nuts , bolts etc i/c
painting etc as reqd.
a) Single curve 40 mm dia of 2 mtr length
(No joints shall be allowed)
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Providing, laying and fixing following dia G.I. pipe
(medium class) in ground complete with G.I.
fittings including trenching (75 cm deep)and re-
filling etc as required
Supplying following LED lamp fitting with lamp
unit suitable for mounting on surface/wall/ the
above ploe including fixing on the pole making
11 connection with suitbale size copper wire/ lugs
and sockets, earthing, making testing
commissiong etc as reqd. (Make: Philips/K-lite/
Wipro or SS make)
a) Linier wall washer, 12 Watt. 0.5 mtr, BIS
b) Up-Down wall light 2 x 6 watt LED, BIS marked nos 10.00 6450.00 64500.00
c) LED street light luminair of 30 watt suitable for
outdoor installation IP 65
d) LED street light luminair of 45-48 watt suitable
for outdoor installation IP 65
(Waranty of All LED fittings shall be 5 years for
which necessary security deposit will be kept with
the department)
TOTAL INTERNAL ELECTRICAL WORK Rs. 1606503.00
Compound wall Lighting
Design, supply, installation, testing and
commsioning of cubicle panel suitable for out door
installation of wether proof design as per IP 65
class, made out of 1.63mm thick CRCA sheet as
per the drawing with cubicle type inernal
arrangement of 1.6 mm thick sheet and with front
opening double door system suitable for mounting
following switch gears, busbars, metering unit,
including painting with powder coated paint of
approved colour and shed with earthing the body
etc as reqd. (drawing shall be approved by
engineer -in charge) (for Compound Light)
a) 63 A, 4 pole MCB - 1 no
b) 20 A, DP MCB, - 3 no
c) 25 A, TP MCB, - 2 no
d) 16 A, SP MCB, - 4 no
e) DOL starter suiable for 3HP pump motor set - 2
f) Digital Time Switch,240V, with Contactor ,
3phase, 415V - 3 set.
g) 4 strip Copper Bus bar suitable for 100 A
(preferably 20mm x 3 mm x 1 nos CU flat ) with
heat shrinkable tube
h) RYB Neon/ LED indicating lamp - for I/C and
switching of feeder
i) 16 A 4-pole Connector - 4 nos
TOTAL COMPOUND WALL LIGHTING Rs. 524000.00
Wiring & Earthing
Wiring for light point/ fan point/ exhaust fan/wall
fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit, with
modular switch, modular plate, suitable GI box
including supplying the same and earthing the
point with 1.5 sq.mm. FRLS PVC insulated copper
conductor single core cable etc as required.
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Wiring for circuit/ submain wiring alongwith earth
wire with the following sizes of FRLS PVC insulated
copper conductor, single core cable in surface/
recessed medium class pvc conduit as required
4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire mtr 15.00 200.00 3000.00
1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire mtr 5.00 249.00 1245.00
Supplying and drawing co-axial TV cable RG-6
grade, 0.7 mm solid copper conductor PE
15 1.19 insulated, shielded with fine tinned copper braid mtr 20.00 33.00 660.00
and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium
class PVC conduit along with accessories in
16 1.21 surface/recess including cutting the wall and
making good the same in case of recessed conduit
Supplying and fixing following size/ modules, GI
17 1.27 box alongwith modular base & cover plate for
modular switches in recess etc as required.
Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
including connections but excluding modular plate,
switch box etc. as required.
1.24.4 3 pin 5/6 amp socket outlet nos 5.00 111.00 555.00
1.24.5 6 pin 15/16 amp socket outlet nos 2.00 175.00 350.00
1.24.6 Telephone socket outlet nos 1.00 119.00 119.00
1.27.7 TV antenna socket outlet nos 1.00 119.00 119.00
1.33 Ceiling rose nos 4.00 65.00 260.00
25A Modular Starter suitable for 1.5/2.0TR AC unit nos 2.00 534.00 1068.00
Supplying and fixing stepped type electronic fan
regulator on the existing modular plate switch box
including connections but excluding modular plate
etc. as required.
Supplying and fixing modular blanking plate on
20 1.26 the existing modular plate & switch box excluding nos 2.00 32.00 64.00
modular plate as required.
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
21 1.31 recess, including providing and fixing 3 pin 5/6 nos 1.00 401.00 401.00
amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required.
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
22 1.32 recess, including providing and fixing 6 pin 5/6 & nos 1.00 495.00 495.00
15/16 amps modular socket outlet and 15/16
amps modular switch, connection etc. as required.
TOTAL WIRING AND EARTHING Rs. 30678.00
Rising main, SDB'S, MCB, ISOLATOR
Supplying and fixing following way, single pole
and neutral, sheet steel, MCB distribution board,
240 volts, on surface/ recess, complete with
23 2.3 tinned copper bus bar, neutral bus bar, earth bar,
din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
2.3.2 8 way, Double door (Shops and UPS supply) nos 1.00 1760.00 1760.00
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Supplying and fixing Cable End Box (Loose wire
box)(IP 43) suitable for following single pole and
24 neutral, sheet steel, MCB distribution board, 240
V/415V, on surface/ recess, complete with testing
and commissioning etc. as required
Supplying and fixing 5 amps to 32 amps rating,
240/415 volts, "C" curve, miniature circuit breaker
25 2.10 suitable for inductive load of following poles in the
existing MCB DB complete with connections,
testing and commissioning etc. as reqd.
2.10.2 Single pole and neutral nos 1.00 445.00 445.00
TOTAL Rising main, SDB'S, MCB, ISOLATOR Rs. 4130.00
Earthing for PANELS & Computer
Earthing with G.I. earth plate 600 mm X 600 mm
X 6 mm thick including accessories, and providing
26 5.4 masonry enclosure with cover plate having locking set 2.00 4327.00 8654.00
arrangement and watering pipe of 2.7 metre long
etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at
0.50 metre below ground as strip earth electrode,
including connection/ terminating with G.I. nut,
bolt, spring, washer etc. as required. (Jointing
shall be done by overlapping and with 2 sets of
G.I. nut bolt & spring washer spaced at 50mm)
Providing and fixing 25 mm X 5 mm G.I. strip in
40 mm dia G.I. pipe (with supply of pipe)from
28 5.11 earth electrode including connection with G.I. nut, mtr 5.00 483.00 2415.00
bolt, spring, washer excavation and re-filling etc.
Providing and fixing 25 mm X 5 mm G.I. strip on
29 5.15 surface or in recess for loop earth connections mtr 5.00 206.00 1030.00
along with cables etc. as required.
TOTAL Earthing for PANELS & Computer Rs. 12524.00
Fitting and Accessories
Supply, Testing, and commissioning of Exhaust
fan 300mm dia suitable to work on 230/250
30 volts, 50HZ complete with mounting frame and nos 1.00 1928.00 1928.00
louvers in the existing opening, making good the
damage, connections,etc as required.
Supplying/fixing of 1200 mm sweep ceiling
31 mounted energy efficient fan of metal blade (5 nos 1.00 2919.00 2919.00
star) of approved make etc as reqd.
Supplying /fixing of 400 mm sweep ceiling/ wall
mounted fan of metal blade of approved make on
the existing wall including connection, testing etc
Supply, Testing & commissioning of recess
mounted energy efficiency White LED down
lighter suitable for following LED confirming to LM-
80 catagory with a special diffuser of approved
make etc as reqd. ( Wipro/Philips/K lite/Similar
a) 12 Watt Square/round nos 2.00 1186.00 2372.00
b) 6-7 Watt Square/round nos 1.00 836.00 836.00
c) Decorative Wall lamp Opal glass with Chrome
34 finish , mirror light , Model KCH-CHR- nos 1.00 2100.00 2100.00
MB160275541Aof Jaguar make
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Supply, Testing & commissioning of surface type
energy efficiency LED tube light fitting, alluminium
linier batten suitable for 1 x 18 /20 watt LED
lamp (with lamp) of approved make (With BIS
certification)etc as reqd. (Model Trim LED LL20 of
Wipro or SS make)
TOTAL Fitting and Accessories Rs. 15972.00
Internal PH work for Security room
SUB HEAD - I - (SANITARY FIXTURES &
INTERNAL PLUMBING)
Providing and fixing water closet squatting pan
(Indian type W.C.pan ) with 100 mm sand cast
Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with
manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making
good the walls and floors wherever required:
8 mm dia C.P. Brass/ S.S. Jet with flexible tube
37 1313.0 upto 1 metre long with S.S. tringular plate for Each 1.00 200.00 200.00
European type W.C.
38 17.34 Providing and fixing toilet paper holder.
Providing and fixing wash basin with C.I. brackets,
15 mm C.P. brass pillar taps, 32 mm C.P. brass
39 17.7 waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever require:
White Vitreous China Wash basin size 630x450
17.7.1 mm with White Vitreous China Wash basin size Nos. 1.00 3087.70 3087.70
630x450 mm with
Providing and fixing C.P. brass angle valve for
40 18.53.1 basin mixer and geyser
points of approved quality conforming to IS:8931
15 mm nominal dia.) Each 4.00 532.00 2128.00
Providing and fixing CP Waste Coupling for wash
41 NSR basins, sinks and urinals. [Continental (Jaquar) each 1.00 300.00 300.00
Allied make, Cat No ALD-CHR-709] or equivalent
Providing and fixing P.V.C. waste pipe for wash
42 17.28.2 basin 'including P.V.C. waste fittings complete.
Providing and fixing CP Brass 32mm size Bottle
43 17.22A Trap of approved quality & make and as per the
direction of Engineer-in-charge
17.73 Providing and fixing PTMT towel rail
complete with brackets fixed to wooden cleats
with CP brass screws with concealed fittings
arrangement of approved quality and colour.
600 mm long towel rail with total length of 645
44.1 17.73.2 . mm, width 78 mm and effective height of 88 mm, Each 1.00 595.50 595.50
weighing not less than 190 gms
Providing and fixing PTMT liquid soap container
109 mm wide, 125 mm high and 112 mm distance
from wall of standard shape with bracket of the
same materials with snap fittings of approved
quality and colour, weighing not less than 105
Providing, fixing, testing and commissioning of
46 NSR shower including necessary wall chases and
Bath and shower mixer with provision for
connection to exposed shower pipe, wall mounted
. Make [Jaquar (Continental) Model Cat No. CON-
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
Bath and shower mixer with provision for
connection to exposed shower pipe, wall mounted
. Make [Jaquar (Continental) Model Cat No. CON-
Supply, fixing and testing of storage type Water
Heater of Approved make high rated pressure
withstand capacity including all fittings & fixture
inside, polypropylene cover non return valve, 1no.
Gate valve all as per IS 2083-195, with 3 core
47 NSR heavy duty copper cable with 3 pin plug,
automatic pressure release valve adjustable
thermostat, thermal cutout, puf insulation, tested
for 3.5Kg pressure, etc.complete, & bracket
painted with two coats of enamel paints.
(Inclusive of all fittings.)shower area
Make : AO Smith HSE-VAS X 10L Storage Water
TOTAL Rs. 20409.15
INTERNAL SOIL, WASTE, RAIN WATER AND
Supplying, fixing and testing PVC pressure pipes
(10Kg/sqcm) confirming to IS 4985 for waste
connection from Sink and wash basin to floor
trap/anti syphonage pipe with solvent cement
joints, including all the fittings, laid in the sunken
slab etc, the work shall include wall chase and
making good the same in cement mortar etc.,
complete. The quoted rate should include
necessary supports like hanger supports, grip
bolts and clamps etc.,
Supplying, fixing and testing PVC soil, waste and
vent pipes (SWR) confirming to IS13592 :1992,
type B with rubber ring (confirming IS:5382) joint
inclusive of all necessary specials like bends, tees,
48 NSR offsets, door ends, junctions, cowls, etc., laid
under floor/fixed on walls, and in pipe shafts etc.,
complete. The quoted rate should include
necessary MS angle supports, grip bolts and
Supply and fixing SWR PVC Plain/multi floor traps
NSR of `P' or `S' type with SS grating and 75mm Each 1.00 650.00 650.00
outlet with necessary water proofing after fixing.
Supplying, fixing and testing PVC rain water pipes
conforming to IS 13592 - 1992 (SWR Type-A) / IS
4985 with all fittings like shoes, bends fixed in
the pipe shafts on pipe racks (including Vertical
stacks pipes.) etc all complete as directed by
engineer in charge
a) 110mm dia (Type-A for shaft)
TOTAL Rs. 4095.00
INTERNAL WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot &
cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at
18.70 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and
the cost of cutting chases and making good the
same including testing of joints complete as per
direction of Engineer in Charge.
Concealed work, including cutting chases and
making good the walls etc.
18.7.1 15 mm dia nominal bore Metre 3.00 241.55 724.65
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
18.7.2 20 mm dia nominal bore Metre 7.00 306.95 2148.65
Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
18.17.2 32 mm nominal bore Each 1.00 581.25 581.25
TOTAL Rs. 3454.55
EXTERNAL SEWERAGE AND DRAINAGE
Excavating trenches of required width for pipes,
cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth upto
1.5 m, including getting out the excavated soil,
2.10 and then returning the soil as required, in layers
not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming,
watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :
Pipes, cables etc. exceeding 80 mm dia. but not
exceeding 300 mm dia
Providing and fixing square-mouth S.W. gully trap
class SP-1 complete with C.I. grating brick
masonry chamber with water tight C.I. cover with
frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be
not less than 2.70 kg as per standard design:
19.4.1 100x100 mm size P type
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Constructing brick masonry manhole in cement
mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) : 8
graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels
in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal
size) finished with a floating coat of neat cement
complete as per standard design :
Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455x610 mm
19.7.1 internal dimensions, total weight of cover and
frame to be not less than 38 kg (weight of cover
23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Providing and constructing 4'0"dia. RCC precasted
rings soak pit as shown in drawing, including
providing & filling of 230mm thick graded gravel
all around the rings, providing & fixing DI frame &
cover ( with hinge) of 600mm x 600mm size,
(Medium Duty.) RCC covering slab etc., complete.
The rate shall include the earth work excavation
in any type of soil and disposing the excavated
earth upto 50mtrs. radius or as directed by the
engineer-in-charge.
TOTAL Rs. 37487.65
EXTERNAL WATER SUPPLY
Providing, fixing, joints and testing in position the
following UPVC Pipe conferming to IS:4985 , SCH-
Digitally signed by Rakesh
Sl.No. Description of Items Units Quantity Rate Amount In Rs.
TOTAL Rs. 4326.00
GRAND TOTAL 79898630.93
GRAND TOTAL 79898630.93
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ICT01NIT.pdf
Tender Document
GCC.pdf
Tender Document
BOQ Boundary Wall.pdf
Tender Document
SCC.pdf
Tender Document
MAKE LIST_ICT.pdf
Tender Document
Signed IP.PDF
Tender Document
Physical Milestone.pdf
Tender Document
Drawings.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .