SPECIAL REPAIR / RENOVATION OF ROAD OF KV BUILDING AT AF STN BHISIANA

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness( below or above ground level), complete all as specified and directed.

Surface dressing n exc 30cm deep and average 15cm deep in Soft/loose soil, complete all as specified and directed.

Excavation in trenches, not exc. 1.5m wide and n.exc 1.5 m in depth, in soft/loose soil and getting out to required level/slope etc complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thickness in any type of soil complete all as specified.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core of broken stone of guage not exc 63 mm deposited, spread and levelled in layer not exc 15 cm thick watered and rammed to a true surfaces, complete all as specified and directed.

Material and labour for cement concrete work in pavement/hard standing of flexural strength 40 kg/square metre in field using 400 kg of cement per cum, thickness of concrete 25 cm or less, complete all as specified and directed.

Material and labour for finishes surface of concrete roads by brooming, complete all as specified and directed.

Material and labour for forming contraction (dummy) joints 65 mm deep x 10 mm wide filled with sealing compound of grade 'A', complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base, complete all as specified and directed.

Material and labour for machine pressed precast cement concrete coloured interlocking paver block with glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 M grade fixed with grey cement and pigment, complete all as specified and directed. Make : UNISTONE, NITCO, ULTRA, HINDUSTAN, MEHTAB TILES, CORAL, PAVIT, NTC

Material and labour for sand filing thick under floor or above subbase for laying interlocking tiles, cushioning all as specified and directed.

Material and labour for machine made kerb stones of size 300x450x100 mm of cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate hydaulically pressed chamfer/ rounded at top and set in cement slurry in cement mortar 1:4, complete all as specified and directed.

Material and labour for coloured chequered cement concrete tiles 30cm x 30 x cm x 25 mm thick with glossy finish set, jointed and pointed in neat cement slurry in floors with grey cement and pigmentcomplete all as specified and directed. Make :NITCO, REGENT TILES, HINDUSTAN, MEHTAB TILES, BHARAT TILES, NTC

Material and labour for screed bed or bedding layer of 20mm thick in cemet mortar (1:4) for laying floor finishes, complete all as specified.

Demolition of Brickwork or stone/ boulder masonary ,built in cement mortar or cement lime mortar.complete all as specified and directed.

Material and labour for brick work with sub class B bricks (old sized brick), straight or curved on plan exc 6 m mean radius , built in cement mortar (1:6), complete all as specified and directed.

M&L for 15 mm thick cement plaster in (1:4) on fair facesof brick or concrete surfaces and finishes even and smooth ( without using extra cement), complete all as specified and as directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per srl iten no 20 above but 6 to 8 mm dia stirrups, complete all as specified and directed.

M & L for form work to sides of pillars, posts, struts, piers, columns and similar work for rough finish surfaces, complete all as specified and directed.

M&L for reinforced cement concrete type, B1, 1:2:4 (20mm graded stone aggregate), for footing, complete all as specified and directed.

M&L for reinforced cement concrete type, B1, 1:2:4 (20mm graded stone aggregate), as in column, pillar, piers, posts, slabs and similar work, complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as coping, kneelers, apex stones, bed plates, kerbs stone, etc, complete all as specified and directed.

S & F 110mm bore PVC SWR pipe ,single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

M&L applying Two coats of Synthetic enamel paint to new steel surfaces over a coat of red oxide primer, surfaces of any description exceeding 10 cm width or girth, complete all as specified and directed.

Material and labour for preparation of new plaster surfaces and applying two coats of cement base paint on concrete surface, complete all as specified and as directed

M&L applying Two coats of Synthetic enamel paint to new concrete surfaces over a coat of primer on preparation of newly surfaces of any description exceeding 10 cm width or girth, complete all as specified and directed.

S & F steel gate framed work as in door or gates of angle or other section with gusset plate, rails braces etc complete drilling for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fixing, complete all as specified and directed.

M/s Kamal Builders

M/s BALDEV SINGH

REYANSH GARG AND COMPANY

M/s Goyal Builders

Aman Enterprises