REPAIRS TO FLOORING ROOFING JOINERY PLUMBING MASONRY MISC WORKS AT FMCC KK SUB AREA STN CELL SIGNAL SECTION 56 ASC (SUP) PRO CIDSS HOSPITAL ROAD UNDER AGE BR (CENTRAL) OF GE (SOUTH) BANGALORE

Amount

Removing Existing water proofing treatment, including bedding concrete etc complete, cleaning the surfaces with wire brushes, removing dust, foreign material ,scrubbing down with water and rubbish off the same beyond the Defence land.

Material and labour for PCC 1:2:4 type B0(using 12.5mm graded stone aggregate) for but on roof slab as required to fill up the undulations to maintain smooth slope (avg thickness 40 mm.)

Material and labour for rendering 15mm thick in CM 1:4 on roof surfaces mixed with WPC finished even and smooth without using extra cement. Note: WP compound will be measured and paid seperately.

Supply only integral water proofing compound.

Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) for filleting and benching, slightly rounded or chamfered on edges.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.50 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost for plants girth not exx 5 cm

All as above item No 7 for plants girth exc 5 cm and n.exc 15 cm

Dismantling asbestos cement (corrugated/semi corrugated etc) sheets in roof coverings

Dismantling unframed rafter/timber scantling 40 cms and over in sections in any position

Ditto as item above but in fillet, rails, posts rafters, purlins etc under 40 sqcm in section, fixed in any position.

S&F mild steel rolled section of grade Fe 410 (Gde E-250) quality A as in main and cross beams hip and jack rafters; purlins where connected to common rafter and running rails ; and similar works fixed with and incl. angle cleats or other connecting plates all as directed by Engr-In -Charge.

M&L preparation of new surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

S & F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of an having.colour on exterior side tensile strength of 550MPA as in roof covering/cladding to walls fied with self tapping screws as specied and conforming to all as specified and directed.

All as per item No. 14 above but plain sheet as in ridges

Cutting chases brick wall , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of 20 mm dia GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia CPVC Union complete all as specified and as directed.

Cleaning of air lock in GI/CPVC/UPVC pipe 15/20 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

S&F PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings upto 5th floor of bldgs complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings upto 5th floor of bldgs complete all as specified and as directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.5 m deep and taking out in fdn in soft/ loose soil.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level).

S&F PVC (SWR) 110 mm 4KGF/scm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings upto 5th floor of bldgs complete all as specified and as directed.

Demolition of Reinforced precast cement concrete manhole cover slab of any description and in any position including and segregation of reinforcement etc

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation concrete.

M&L cement concrete 1:2:4 type B 2 (using 40mm graded coarse aggregate) as surface channels and drains complete all as specified and directed.

M&L for returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm of hard/dense soil.

M&L for removal of excavated material exc 250m but n exc 500m and depositing where directed

M&L Pre cast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate for cover slab for man holes and set in cement mortar (1:4)

M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wire annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia

S&F in repair PVC bends any radius 75 mm dia with access door

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as dircted.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 upto 5th floor of bldgs complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed..

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc

M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and directed.

M & L for applying two coats of oil emulsion distemper on new plastered surfaces of walls incl preparation of surfaces and applying one coat of alkali resistant primer complete all as specified and directed .

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete upto 5th floor of bldgs all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm upto 5th floor of bldgs.

Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismantled portion in cement mortar 1 : 3 or cement concrete 1 :2 :4 type B1, in opening exc 400 Sq cm and and n exc 0.1 Sqm as required upto 5th floor of bldgs

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints upto 5th floor of bldgs.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides upto 5th floor of bldgs .

S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered upto 5th floor of bldgs

S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples upto 5th floor of bldgs.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete upto 5th floor of bldgs all as specified and as directed.

S&F stainless steel 100 mm butt hinges for doors complete upto 5th floor of bldgs all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete upto 5th floor of bldgs all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs all as specified.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete upto 5th floor of bldgs all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete upto 5th floor of bldgs all as specified and directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm upto 5th floor of bldgs.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, upto 5th floor of bldgs complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto 5th floor of bldgs

S&F stainless steel 75 mm butt hinges for doors complete upto 5th floor of bldgs all as specified.

S&F 100 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs all as specified.

S&F 100 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs all as specified.

Taking down of shutter n.exc 1.0 sqm upto 5th floor of bldgs.

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, but divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered upto 5th floor of bldgs.

S&F sheet glass ordinary quality 4mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified upto 5th floor of bldgs .

S&F in repairs 75 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs all as specified.

S&F in repairs 75 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs all as specified.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle of size 100mm, and steel peg stay, complete with glazing bars, dovetailed or welded complete upto 5th floor of bldgs all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete upto 5th floor of bldgs all as specified and as directed.

Repairs to existing steel window / Ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,refixing the shutter and making good the suface finish to match extg wall surface complete upto 5th floor of bldgs all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, zincchrome primer complete upto 5th floor of bldgs all as specified and as directed.

S&F Powder coated aluminium frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, Handle 02 Nos in each door, Stopper 01 No , Hinges powder coated aluminium spap beading, screws etc, complete all as specified.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminium spap beading, screws etc, complete all as specified.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F in repairs Stainless Steel mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanized wire staples complete upto 5th floor of bldgs all as specified.

S&F in repairs 4.0 mm thick figured glass, pin head type and glazing with oil putty in square exc 0.5 sqm in each pane upto 5th floor of bldgs.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete upto 5th floor of bldgs all as specified.

S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required upto 5th floor of bldgs all as specified.

S&F Mild steel 2 levers mortice lock, vertical type, size 100mm complete upto 5th floor of bldgs all as specified & directed by Engineer-in-Charge.

S&F in repairs fancy type brass bracket with screw 25 mm dia including wooden plugs upto 5th floor of bldgs.

S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs upto 5th floor of bldgs.

S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia upto 5th floor of bldgs.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including vitreous china 110mm 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor upto 5th floor of bldgs complete all as specified

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia pipe required length for Nahani trap along with grating and testing manholes as specified by filling with water upto 5th floor of bldgs complete all as specifed and as directed.

S&F in repair vitreous china washdown down water closet set incl internal fittings complete of size 710x390x790mm snow white colour washdown water closet pan & trap (One peace) with soft close seat cover with mild steel chromium plated or aluminium hinginng device incl all joints incl connection to drain pipe complete all as specified and directed. Make:- Cera (Cruiser) or equivalent in Hindware/Paryware/Jaguar/Kohlar.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete upto 5th floor of bldgs all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bend etc. complete upto 5th floor of bldgs all as specified and directed

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC complete upto 5th floor of bldgs all as specified.

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC syphons, leaking PVC bends/GI pipes etc. complete upto 5th floor of bldgs all specified and directed by Engineer in charge

S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete upto 5th floor of bldgs all as specified.

S&F in repairs PVC connection 15 mm size , 45 cm long with PTMT adopter,check nuts and washer on both sides for cold water complete upto 5th floor of bldgs all as specified.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete upto 5th floor of bldgs all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete upto 5th floor of bldgs all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for WHB complete upto 5th floor of bldgs all as specified.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete upto 5th floor of bldgs all as specified and directed.

S&F in repairs sink made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete upto 5th floor of bldgs all as specified and directed.

S&F in repair 40 mm dia PVC waste pipe for SS Kitchen sink complete upto 5th floor of bldgs all as specified.

S&F in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete upto 5th floor of bldgs all as specified.

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete upto 5th floor of bldgs all as specified.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe upto 5th floor of bldgs

S&F 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule upto 5th floor of bldgs

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). Complete upto 5th floor of bldgs all as specified

S&F in repairs pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe, complete upto 5th floor of bldgs all as specified and directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with overhead shower with bend pipe complete upto 5th floor of bldgs all as specified.

S&F in repairs stop valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions complete upto 5th floor of bldgs all as specified and directed

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete upto 5th floor of bldgs all as specified and directed.

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete upto 5th floor of bldgs all as specified and directed.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete upto 5th floor of bldgs all as specified and directed by Engineer in charge.

S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete upto 5th floor of bldgs all as specified.

S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete upto 5th floor of bldgs all as specified and directed

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete upto 5th floor of bldgs all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete upto 5th floor of bldgs all as specified.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement upto 5th floor of bldgs.

S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete upto 5th floor of bldgs all as specified and directed by the Engr-in-Charge.

S&F in repair brass chromium plated tubular towel rail 600 mm long complete all as specified and directed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified upto 5th floor of bldgs.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed including dismantling and removing to store in position upto 5th floor of bldgs all as specified

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe upto 5th floor of bldgs .

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 20mm-210gms) and fixed in repairs upto 5th floor of bldgs all as specified.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms) upto 5th floor of bldgs .

S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete upto 5th floor of bldgs all as specified.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises upto 5th floor of bldgs all as specified and as directed.

M&L for preparing of newly plastered surfaces and applying three coats of white wash on ceilings complete upto 5th floor of bldgs all as specified and as directed by the Engineer-in-Charge

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls finished even and smooth without using extra cement including taking down existing plaster, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete upto 5th floor of bldgs all as specified and as directed.

Dismantling floor, hearth or wall tiling including cemen mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base of floors

S&F coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6

S&F coloured glazed ceramic tiles in vertical surfaces area of each tile exceeding 0.06 sqm but not exceeding 0.12 sqm set over 10 mm thick rendering on fair faces of brickwork or concrete surfaces as backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Vitrified ceramic tiles light shade 8 to 9 mm thick double charged(Square/Rectangular) polished, area of each tile n. exc 0.36 Sqm in floors/dado incl cement mortar screed 1:4 15mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying one coat of white wash including cleaning of splashes of white wash on floor/objects etc upto 5th floor of bldgs all as specified and directed.

M&L for preparation of old distempered surfaces of ceilngs and applying one coat of oil bound distemper including cleaning splashes of distmeper on floor/objects etc upto 5th floor of bldgs all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash upto 5th floor of bldgs all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying two coat of white wash upto 5th floor of bldgs all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed upto 5th floor of bldgs.

M&L for preparation of old distempered surfaces of walls and applying two coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed upto 5th floor of bldgs .

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil bound distemper over a coat primer over 3 mm thick birla wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed upto 5th floor of bldgs..

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified upto 5th floor of bldgs.

M&L for preparation of old painted surfaces of steel and iron work exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified upto 5th floor of bldgs.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Use of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures (Note :- Any stair of bldg up to 5th floor)

M&L preparation of old decorated surfaces of walls externally and applying one coat of cement based paint including filling cracks / holes with wall care putty all as specified upto 5th floor of bldgs.

M&L complete removal of existing treatment and applying two coat of cement base paint over a coat of primer upto 5th floor of bldgs..

Annapoorneshwari Construction

Suresh painters