REPAIR REPLACEMENT OF CGI SHEETS STRUCTURAL REPAIR AND PLUMBING WORK AT LEFT SIDE OF NAVAL DOCKYARD MUMBAI

Amount

Taking down chowkats or frame with shutter (without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified and directed Engr-in-Charge.

Taking down chowkats or frame with shutter (without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and directed Engr-in-Charge.

Dismantling battens for tiles, shingles etc of any size including tilling fillets exceeding 15 cm space complete all as specified and directed Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed Engr-in-Charge

Dismantling false ceiling/boarding any description fixed in any position with nails complete all as specified and directed Engr-in-Charge

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.

Taking down 20mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed Engr-in-Charge

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends, swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed Engr-in-Charge

Dismantling floor hearth or wall tiling, concrete tiles, and including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden & Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed Engr-in-Charge.

Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and directed Engr-in-Charge.

Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed Engr-in-Charge

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed Engr-in-Charge

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed Engr-in-Charge.

Material & Labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed Engr-in-Charge

All as per item No. 16 above but half brick thick wall built in CM 1:4 complete all as specified and directed Engr-in-Charge

Material & Labour for PCC 1:3:6 type C2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and directed Engr-in-Charge.

Material & Labour for 40mm thick PCC 1:2:4 type B I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed Engr-in-Charge.

Supply & fixing for 1st class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed Engr-in-Charge

Supply & fixing Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed Engr-in-Charge.

Supply & fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed Engr-in-Charge.

Supply & fixing Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Engr-in-Charge.

Material & Labour for Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and directed

Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm complete all as specified and directed

Material & Labour for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications complete all as specified and directed Engr-in-Charge

Material & Labour for 12 mm thick pre-laminated Medium Density board, both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and directed Engr-in-Charge

Supply & fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed Engr-in-Charge

Supply & fixing Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed Engr-in-Charge

Supply & fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed Engr-in-Charge

Supply & fixing Extrude aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and directed Engr-in-Charge

Supply & fixing Mortice lock, 4 liver vertical type, size 100mm complete all as specified and directed

Supply & fixing aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed Engr-in-Charge

Material & Labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed Engr-in-Charge

Supply & fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed Engr-in-Charge

Material & Labour for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM 1:6, 20 mm complete all as specified and directed Engr-in-Charge.

Material & Labour for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, as in skirting including 10mm thick rendering in CM. 1:4 as backing coat complete all as specified and directed Engr-in-Charge.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed Engr-in-Charge.

Material & Labour for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and directed Engr-in-Charge.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed Engr-in-Charge.

Material & Labour for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed Engr-in-Charge.

Material & Labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed Engr-in-Charge.

Supply & fixing false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 5 to 6mm thick high pressure PVC ceiling board of size 595mmX595mm, as per manufacturer instruction complete all as specified and directed Engr-in-Charge.

Material and labour for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern complete all as specified and directed Engr-in-Charge.

Supply and fixing in repair 3 mm thick Aluminium Composite panel cladding plain metallic of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs PVC 3 to 5 mm thick wall panelling including cutting, moulding, angle cleat, nails, screws, Tee section, etc complete all as specified and directed Engr-in-Charge.

Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls complete all as specified and directed Engr-in-Charge.

Material & Labour for PCC 1:7:12 type F2 using 40 mm graded crushed stone aggregate as in filling (sunken portion). Etc complete all as specified and directed Engr-in-Charge.

Material & Labour for PCC 1:2:4 type B0 using 20 mm graded crushed stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction , as sub floor, 40mm thick complete all as specified and directed. (Water Proofing Chemical shall be measured and paid separately)

Supply only Water proofing chemical complete all as specified and directed Engr-in-Charge.

Material & Labour for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3, complete all as specified and directed Engr-in-Charge.

Supply & fixing welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel, weigh per Sqm nexc. 4 Kg complete all as specified and directed Engr-in-Charge.

Material & Labour for RCC Type B1 1:2:4 using 20 mm graded crushed stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and directed Engr-in-Charge.

Material & Labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed Engr-in-Charge.

All as per item No. 54 above but as in stirrups complete all as specified and directed Engr-in-Charge.

Supply & fixing for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete all as specified and directed Engr-in-Charge.

Supply & fixing for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed Engr-in-Charge.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and directed Engr-in-Charge.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and directed Engr-in-Charge.

M & L except sheeting for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and directed Engr-in-Charge.

Material & Labour for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.

Supply & fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Supply & fixing 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Supply & fixing in repairs teak wood face ply 3 to 4mm thick including nails, screws, adhesive, complete all as specified and directed Engr-in-Charge.

Supply & fixing white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified and directed Engr-in-Charge.

Supply & fixing white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified and directed Engr-in-Charge.

Supply & fixing white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed Engr-in-Charge.

Supply & fixing 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. complete all as specified and directed

Supply & fixing 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed

Supply & fixing in repairs fancy type bib tap 15 mm bore dia of pipe, brass chromium plated complete all as specified and directed Engr-in-Charge.

Supply & fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed

Supply & fixing in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed Engr-in-Charge.

Supply & fixing PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed Engr-in-Charge.

Supply & fixing brass chromium plated shower rose 125mm size, fixed in repairs complete all as specified and directed Engr-in-Charge.

Supply & fixing chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and directed Engr-in-Charge.

Supply & fixing in repairs Soap dish, vitreous china white, approximat size 160X160X90mm complete all as specified and directed Engr-in-Charge.

Supply & fixing 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. (Note:- Measurment shall be taken along the centre line of the pipes.) complete all as specified and directed Engr-in-Charge.

Supply & fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and directed Engr-in-Charge.

Supply & fixing 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed Engr-in-Charge.

Supply & fixing 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed Engr-in-Charge.

Supply & fixing 110mm dia PVC ( SWR) grade double T with access doors including fixing clips complete all as specified and directed Engr-in-Charge.

Material & Labour for PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement complete all as specified and directed Engr-in-Charge.

Supply & fixing polyethylene water storage rotational moulded, 2000 Ltrs Capacity, hoisted and fixed in position with connecting nipple, top cover etc. complete including dismantling old U/S tank of any description complete all as specified and directed Engr-in-Charge.

Supply & fixing in repairs 1000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Engr-in-Charge..

Material & Labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and directed Engr-in-Charge.

Material & Labour for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed Engr-in-Charge.

Material & Labour for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of newly plastered surfaces in ceiling , applying three coats of white wash complete all as specified and directed Engr-in-Charge.

Material & Labour for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash complete all as specified and directed Engr-in-Charge.

Material & Labour for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface seven and fair. (Water Proofing Chemical shall be measured and paid seperately) complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and directed Engr-in-Charge.

Material & Labour for complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of new decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic eanmel paint complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of old decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic eanmel paint complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Engr-in-Charge.

Material & Labour for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Engr-in-Charge.

Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil.

Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface complete all as specified and directed Engr-in-Charge. Note :- (New reinforcement and MS Sections will be measured and paid separately)

Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface complete all as specified and directed Engr-in-Charge. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)

Supply only ready mix microconcrete mixture complete all as specified and directed Engr-in-Charge.

Supply & fixing 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated complete all as specified and directed Engr-in-Charge.

Supply & fixing Ist class hard wood glazed and skelton shutter 30 mm thick window shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of sash bars any numbers complete all as specified and directed

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed

Complete removal of existing water proofing treatment of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500 mtr distance complete all as specified and directed Engr-in-Charge.

Material & Labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces and like complete all as specified and directed Engr-in-Charge.

Material & Labour PCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope with 3% water proofing compound in weight of cement complete all as specified and directed Engr-in-Charge. (Note : Water proofing compound shall be measured and paid seperately).

Material & Labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with no woven polyester mat of weight not less than 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ends respectively) etc complete all as specified and directed Engr-in-Charge. The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing.

Material & Labour for rendering 20mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total weight of cement in concrete complete all as specified and directed Engr-in-Charge. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed Engr-in-Charge.

Material & Labour for cement concrete tiles 250mmX250mmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. complete all as specified and directed Engr-in-Charge.

Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square centimetre in field using minimum 500 Kg of cement per cubic metre with thickness 25 cm or less laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc complete all as specified and directed Engr-in-Charge.

Supply & fixing in repairs ruberised/PVC floor mats 1.5mm thick durable, any colour fixed on floor with adhesive of approved make complete all as specified and directed Engr-in-Charge.

Taking down 40 to 50mm bore, GI tubing and connections including cleaning for refixing or removal to store in roof complete all as specified and directed Engr-in-Charge.

Taking down 25 to 32.0mm bore, GI tubing and connections including cleaning for refixing or removal to store in roof complete all as specified and directed Engr-in-Charge.

Material & Labour for refixing old steel tubing and connection in new or old position of 40mm to 50mm dia bore including all connection accessories , tee, elbow, check nut, socket, (walls, ceiling, floors etc) complete all as specified and directed Engr-in-Charge.

Material & Labour for refixing old steel tubing and connection in new or old position of 20mm to 32 mm dia bore including all connection accessories , tee, elbo, check nut, socket, (walls, ceiling, floors etc complete all as specified and directed Engr-in-Charge.

Supply & fixing 50 mm dia medium grade galvanized steel tubing with all fittings , like tee, elbow, bend, sockets, check nuts, fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Supply & fixing 80 mm dia medium grade galvanized steel tubing with all fittings , like tee, elbow, bend, sockets, check nuts, fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Supply & fixing 32 mm dia medium grade galvanized steel tubing with all fittings, like tee, elbow, bend, sockets, check nuts fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Supply & fixing 40 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed Engr-in-Charge.

Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed Engr-in-Charge.

Material & Labour for machine pressed precast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness M-40 grade with grey cement and pigment over 25mm thick sand cushioning complete all as specified and directed Engr-in-Charge.

Material & Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigmentover 25mm thick sand cushioning complete all as specified and directed Engr-in-Charge.

Material & Labour for PCC 75mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base complete all as specified and directed Engr-in-Charge.

Material & Labour for Chequered cement concrete tiles 300mm x 300mm x 25mm thick set jointed and pointed in neat cement slurry in floors withgrey pigment cement and pigment over including 20mm thick screed bed in CM 1:6 complete all as specified and directed Engr-in-Charge.

Supply & fixing roof tiles Manglore pattern interlocking at side joint and laid dry complete all as specified and directed Engr-in-Charge.

Supply & fixing for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed Engr-in-Charge.

Idustrial products India

Garima Construction Co

jalandhara construction

the bhimani group of companies

sai construction

C S Sharma and Co