Re-development of office cum rest room complex at Shivaji Bridge, New Delhi.

Existing Building/floors & Construction/renovation of GF,1st, 2nd & 3rd Floor. NS2 500.00 Sqm 637.10 318550.00 AT Par 318550.00 1 Description:- Concept Design approved by client of Architecture design NS3 500.00 Sqm 637.10 318550.00 AT Par 318550.00 3 Description:- Working Drawing submission in Coordination with Structure Design Documentation . S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () B-Part-B CPWD DSR 2021 Items for Structural Strengthening of Existing 5944560.00 Below/P Building ar 26.38.2 1000.00 Sqm 1073.45 1073450.00 AT Par 1073450.00 Description:- NEW TECHNOLOGIES AND MATERIALS // REPAIR AND REHABILITATION ITEMS // Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete

coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge // 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 26.40 1000.00 Sqm 820.80 820800.00 AT Par 820800.00 Description:- NEW TECHNOLOGIES AND MATERIALS // REPAIR AND REHABILITATION ITEMS // Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire

key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 5.22A.6 4900.00 Kg 89.65 439285.00 AT Par 439285.00

for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. 8.32 500.00 Sqm 4474.20 2237100.00 AT Par 2237100.00 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone

Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS

contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. 25.1 2500.00 Kg 370.45 926125.00 AT Par 926125.00 Description:- STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL // Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS

colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. 10.2 4000.00 Kg 111.95 447800.00 AT Par 447800.00

trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () C-Part-C CPWD DSR 2021 Items for Renovation & Conversion of Existing 7419828.05 Below/P GF into ORH ar 15.2.1 10.00 cum 2007.10 20071.00 AT Par 20071.00

mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 15.3 10.00 cum 2928.10 29281.00 AT Par 29281.00

mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 15.56 250.00 Sqm 45.05 11262.50 AT Par 11262.50

joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within

15.57 200.00 Sqm 46.50 9300.00 AT Par 9300.00 Description:- DISMANTLING AND DEMOLISHING // Dismantling aluminium/ Gypsum partitions,

stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 15.7.4 20.00 cum 1698.45 33969.00 AT Par 33969.00

mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar 15.12.1 25.00 Each 302.70 7567.50 AT Par 7567.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area 3 sq. metres and below 15.12.2 10.00 Each 414.55 4145.50 AT Par 4145.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area beyond 3 sq. metres 15.18 1000.00 Kg 4.65 4650.00 AT Par 4650.00

angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.60 500.00 cum 219.35 109675.00 AT Par 109675.00 Description:- DISMANTLING AND DEMOLISHING // Disposal of building rubbish / malba / similar

unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15.23.1 400.00 Sqm 60.50 24200.00 AT Par 24200.00

in cement mortar including stacking material within 50 metres lead. // For thickness of tiles 10 mm to 25 mm 6.1.1 10.00 cum 6882.00 68820.00 AT Par 68820.00

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand) 6.4.1 100.00 cum 8512.10 851210.00 AT Par 851210.00

of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:4 (1 cement : 4 coarse sand) 13.1.1 1000.00 Sqm 294.85 294850.00 AT Par 294850.00

1:4 (1 cement: 4 fine sand) 8.2.2.2 50.00 Sqm 4425.35 221267.50 AT Par 221267.50 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab over 0.50 sqm 8.2.2.1 100.00 Sqm 4679.35 467935.00 AT Par 467935.00 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab upto 0.50 sqm 8.31 200.00 Sqm 1063.45 212690.00 AT Par 212690.00 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.37 150.00 Sqm 935.60 140340.00 AT Par 140340.00 Description:- FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming

mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 11.41.2 250.00 Sqm 1416.65 354162.50 AT Par 354162.50 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm 10.16.2 1000.00 Kg 168.95 168950.00 AT Par 168950.00 Description:- STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow

approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished seamless type tubes 10.25.2 1000.00 Kg 142.30 142300.00 AT Par 142300.00 Description:- STEEL WORK // Steel work welded in built up sections/ framed work, including

structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.28 500.00 Kg 612.25 306125.00 AT Par 306125.00 Description:- STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 9.147D.2 50.00 Sqm 10030.30 501515.00 AT Par 501515.00 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. // Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.48.2 500.00 Kg 197.70 98850.00 AT Par 98850.00 Description:- WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing

including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc. 21.3.1 40.00 Sqm 1019.80 40792.00 AT Par 40792.00 Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 9.12 20.00 Sqm 148.50 2970.00 AT Par 2970.00 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY

and clerestory windows using 4 mm thick float glass panes, (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. // Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 9.20.1 80.00 Sqm 3086.10 246888.00 AT Par 246888.00 Description:- WOOD AND P.V.C. WORK // Providing and fixing 25 mm thick shutters for cup

decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. // 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 26.24.1 400.00 Sqm 2748.85 1099540.00 AT Par 1099540.00 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x

expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size

the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. // With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles 26.23.1 160.00 Sqm 2055.65 328904.00 AT Par 328904.00 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile

15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. // With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles 18.8.2 80.00 Metre 513.75 41100.00 AT Par 41100.00 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 20 mm nominal dia Pipes 18.8.3 80.00 Metre 626.05 50084.00 AT Par 50084.00 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 25 mm nominal dia Pipes 22.14.1 20.00 cum 7510.75 150215.00 AT Par 150215.00

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 18.49.1 20.00 Each 434.20 8684.00 AT Par 8684.00

approved quality conforming to IS:8931 : // 15 mm nominal bore 18.52.1 20.00 Each 594.75 11895.00 AT Par 11895.00

(concealed) of standard design and of approved make conforming to IS:8931. // 15 mm nominal bore 18.18.3 20.00 Each 399.15 7983.00 AT Par 7983.00

approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal bore 18.22.2 10.00 Each 190.10 1901.00 AT Par 1901.00

unions : // Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : // 150 mm diameter 18.50.1 20.00 Each 715.05 14301.00 AT Par 14301.00

bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. // 15 mm nominal bore 18.51.1 20.00 Each 708.40 14168.00 AT Par 14168.00

bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. // 15 mm nominal bore 12.50 30.00 Sqm 671.55 20146.50 AT Par 20146.50 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120

sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 11.20.2 80.00 Sqm 1160.00 92800.00 AT Par 92800.00 Description:- FLOORING // TILE FLOORING // Chequerred precast cement concrete tiles 22 mm

shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). // Medium shade pigment using 50% white cement 50% Grey cement 16.91.2 100.00 Sqm 1011.20 101120.00 AT Par 101120.00 Description:- ROAD WORK // MISCELLANEOUS // Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid

embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. // 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 16.60.1 20.00 Sqm 5609.55 112191.00 AT Par 112191.00 Description:- ROAD WORK // MISCELLANEOUS // Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-

by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to

suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). // Overhead informatory road signage 17.4.1 2.00 Each 5268.85 10537.70 AT Par 10537.70 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china flat back or

respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : // One urinal basin with 5 litre white P.V.C. automatic flushing cistern 17.2.1 4.00 Each 5540.55 22162.20 AT Par 22162.20 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal

cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid 17.1.1 2.00 Each 5781.35 11562.70 AT Par 11562.70 Description:- SANITARY INSTALLATIONS // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 17.7.1 4.00 Each 2275.00 9100.00 AT Par 9100.00 Description:- SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15

and brackets, cutting and making good the walls wherever require: // White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17.10.1.1 1.00 Each 6008.45 6008.45 AT Par 6008.45 Description:- SANITARY INSTALLATIONS // Providing and fixing Stainless Steel A ISI 304 (18/8)

fittings and brackets, cutting and making good the walls wherever required : // Kitchen sink with drain board // 510x1040 mm bowl depth 250 mm 9.165.1 60.00 Each 100.45 6027.00 AT Par 6027.00

bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. // 125 mm 9.100.1 60.00 Each 60.05 3603.00 AT Par 3603.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 125 mm 9.96.2 60.00 Each 234.90 14094.00 AT Par 14094.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : // 250x16 mm 9.101.1 30.00 Each 35.50 1065.00 AT Par 1065.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. // Single rubber stopper 9.97.2 30.00 Each 104.40 3132.00 AT Par 3132.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 250x10 mm Per bag of 13.21 200.00 cement of 60.55 12110.00 AT Par 12110.00

Description:- FINISHING // PEBBLE DASH PLASTER // Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 13.22 200.00 Sqm 72.80 14560.00 AT Par 14560.00

more than 10 m from ground level for every additional height of 3 m or part thereof. 13.98.1 500.00 Sqm 90.85 45425.00 AT Par 45425.00 54 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 54 Description:- FINISHING // Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. // Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: // One or more coats on old work 13.91 1300.00 Sqm 20.85 27105.00 AT Par 27105.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13.99.1 800.00 Sqm 86.55 69240.00 AT Par 69240.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

enamel paint of approved brand and manufacture of required colour to give an even shade : // One or more coats on old work 13.48.1 200.00 Sqm 158.95 31790.00 AT Par 31790.00 Description:- FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint

coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 9.47.2 50.00 Metre 159.35 7967.50 AT Par 7967.50

nickel plated M.S. pipe curtain rods with nickel plated brackets : // 25 mm dia (heavy type) 5.30 100.00 Metre 64.70 6470.00 AT Par 6470.00

expansion joints with iron screws as per design. // Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 11.5 50.00 Sqm 928.65 46432.50 AT Par 46432.50 Description:- FLOORING // 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 17.32.2 10.00 Each 1158.95 11589.50 AT Par 11589.50

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 453x357 mm 17.32.4 10.00 Each 1817.20 18172.00 AT Par 18172.00

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 1500x450 mm 16.75 50.00 cum 8277.55 413877.50 AT Par 413877.50 Description:- ROAD WORK // MISCELLANEOUS // Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished

with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @

cement in the items of design mix over and above the specified cement content therein. 13.26 800.00 Sqm 214.30 171440.00 AT Par 171440.00

mm thickness over plastered surface to prepare the surface even and smooth complete. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () D-Part-D CPWD DSR 2021 Items for Renovation & Conversion of Existing 6931885.55 Below/P 2nd Floor into ORH ar 15.2.1 10.00 cum 2007.10 20071.00 AT Par 20071.00 Description:- DISMANTLING AND DEMOLISHING // Demolishing cement concrete manually/ by

in - charge. // Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 15.3 10.00 cum 2928.10 29281.00 AT Par 29281.00

mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 15.56 250.00 Sqm 45.05 11262.50 AT Par 11262.50

joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within

doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 15.7.4 20.00 cum 1698.45 33969.00 AT Par 33969.00

mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar 15.12.1 25.00 Each 302.70 7567.50 AT Par 7567.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area 3 sq. metres and below 15.12.2 10.00 Each 414.55 4145.50 AT Par 4145.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area beyond 3 sq. metres 15.18 1000.00 Kg 4.65 4650.00 AT Par 4650.00

angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.60 500.00 cum 219.35 109675.00 AT Par 109675.00 Description:- DISMANTLING AND DEMOLISHING // Disposal of building rubbish / malba / similar

unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15.23.1 400.00 Sqm 60.50 24200.00 AT Par 24200.00

in cement mortar including stacking material within 50 metres lead. // For thickness of tiles 10 mm to 25 mm 6.1.1 10.00 cum 6882.00 68820.00 AT Par 68820.00

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand) 9.159 40.00 Sqm 1890.90 75636.00 AT Par 75636.00 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998

be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. 6.4.1 100.00 cum 8512.10 851210.00 AT Par 851210.00

of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:4 (1 cement : 4 coarse sand) 13.1.1 1000.00 Sqm 294.85 294850.00 AT Par 294850.00

1:4 (1 cement: 4 fine sand) 8.2.2.2 50.00 Sqm 4425.35 221267.50 AT Par 221267.50 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab over 0.50 sqm 8.2.2.1 100.00 Sqm 4679.35 467935.00 AT Par 467935.00 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab upto 0.50 sqm 8.31 200.00 Sqm 1063.45 212690.00 AT Par 212690.00 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.37 150.00 Sqm 935.60 140340.00 AT Par 140340.00 Description:- FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor

to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41.2 250.00 Sqm 1416.65 354162.50 AT Par 354162.50 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm 10.16.2 1000.00 Kg 168.95 168950.00 AT Par 168950.00 Description:- STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow

approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished seamless type tubes 10.25.2 1000.00 Kg 142.30 142300.00 AT Par 142300.00 Description:- STEEL WORK // Steel work welded in built up sections/ framed work, including

structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.28 500.00 Kg 612.25 306125.00 AT Par 306125.00 Description:- STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 9.147D.2 40.00 Sqm 10030.30 401212.00 AT Par 401212.00 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. // Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.48.2 500.00 Kg 197.70 98850.00 AT Par 98850.00 24 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 24 Description:- WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc. 21.3.1 40.00 Sqm 1019.80 40792.00 AT Par 40792.00 Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 9.12 20.00 Sqm 148.50 2970.00 AT Par 2970.00 Description:- WOOD AND P.V.C. WORK // Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, (weight not less than 10 kg per sqm)

screws. // Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 9.20.1 80.00 Sqm 3086.10 246888.00 AT Par 246888.00 Description:- WOOD AND P.V.C. WORK // Providing and fixing 25 mm thick shutters for cup

decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. // 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 26.24.1 400.00 Sqm 2748.85 1099540.00 AT Par 1099540.00 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x

expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size

the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. // With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles 26.23.1 160.00 Sqm 2055.65 328904.00 AT Par 328904.00 29 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 29 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. // With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles 18.8.2 80.00 Metre 513.75 41100.00 AT Par 41100.00 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 20 mm nominal dia Pipes 18.8.3 80.00 Metre 626.05 50084.00 AT Par 50084.00 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 25 mm nominal dia Pipes 22.14.1 20.00 cum 7510.75 150215.00 AT Par 150215.00

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 18.49.1 20.00 Each 434.20 8684.00 AT Par 8684.00

approved quality conforming to IS:8931 : // 15 mm nominal bore 18.52.1 20.00 Each 594.75 11895.00 AT Par 11895.00

(concealed) of standard design and of approved make conforming to IS:8931. // 15 mm nominal bore 18.18.3 20.00 Each 399.15 7983.00 AT Par 7983.00

approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal bore 18.50.1 20.00 Each 715.05 14301.00 AT Par 14301.00

bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. // 15 mm nominal bore 18.51.1 20.00 Each 708.40 14168.00 AT Par 14168.00

bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. // 15 mm nominal bore 18.22.2 10.00 Each 190.10 1901.00 AT Par 1901.00

unions : // Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : // 150 mm diameter 12.50 30.00 Sqm 671.55 20146.50 AT Par 20146.50 39 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY

accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 11.20.2 80.00 Sqm 1160.00 92800.00 AT Par 92800.00 Description:- FLOORING // TILE FLOORING // Chequerred precast cement concrete tiles 22 mm

shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). // Medium shade pigment using 50% white cement 50% Grey cement 16.91.2 100.00 Sqm 1011.20 101120.00 AT Par 101120.00 Description:- ROAD WORK // MISCELLANEOUS // Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid

embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. // 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 16.60.1 20.00 Sqm 5609.55 112191.00 AT Par 112191.00 Description:- ROAD WORK // MISCELLANEOUS // Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-

by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to

suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). // Overhead informatory road signage 17.4.1 2.00 Each 5268.85 10537.70 AT Par 10537.70 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes

brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : // One urinal basin with 5 litre white P.V.C. automatic flushing cistern 17.2.1 4.00 Each 5540.55 22162.20 AT Par 22162.20 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal

cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid 17.1.1 2.00 Each 5781.35 11562.70 AT Par 11562.70 Description:- SANITARY INSTALLATIONS // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 17.7.1 2.00 Each 2275.00 4550.00 AT Par 4550.00 46 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY Description:- SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17.10.1.1 1.00 Each 6008.45 6008.45 AT Par 6008.45 Description:- SANITARY INSTALLATIONS // Providing and fixing Stainless Steel A ISI 304 (18/8)

fittings and brackets, cutting and making good the walls wherever required : // Kitchen sink with drain board // 510x1040 mm bowl depth 250 mm 9.165.1 60.00 Each 100.45 6027.00 AT Par 6027.00

bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. // 125 mm 9.100.1 60.00 Each 60.05 3603.00 AT Par 3603.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 125 mm 9.96.2 60.00 Each 234.90 14094.00 AT Par 14094.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : // 250x16 mm 9.101.1 30.00 Each 35.50 1065.00 AT Par 1065.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. // Single rubber stopper 9.97.2 30.00 Each 104.40 3132.00 AT Par 3132.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 250x10 mm Per bag of 13.21 200.00 cement of 60.55 12110.00 AT Par 12110.00

Description:- FINISHING // PEBBLE DASH PLASTER // Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 13.22 200.00 Sqm 72.80 14560.00 AT Par 14560.00

more than 10 m from ground level for every additional height of 3 m or part thereof. 13.98.1 500.00 Sqm 90.85 45425.00 AT Par 45425.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

emulsion paint of approved brand and manufacture to give an even shade: // One or more coats on old work 13.91 1300.00 Sqm 20.85 27105.00 AT Par 27105.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13.99.1 600.00 Sqm 86.55 51930.00 AT Par 51930.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

enamel paint of approved brand and manufacture of required colour to give an even shade : // One or more coats on old work 13.48.1 200.00 Sqm 158.95 31790.00 AT Par 31790.00 Description:- FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint

coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 9.47.2 50.00 Metre 159.35 7967.50 AT Par 7967.50

nickel plated M.S. pipe curtain rods with nickel plated brackets : // 25 mm dia (heavy type) AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 5.30 100.00 Metre 64.70 6470.00 AT Par 6470.00

expansion joints with iron screws as per design. // Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 11.5 50.00 Sqm 928.65 46432.50 AT Par 46432.50 Description:- FLOORING // 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 17.32.2 10.00 Each 1158.95 11589.50 AT Par 11589.50

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 453x357 mm 17.32.4 10.00 Each 1817.20 18172.00 AT Par 18172.00

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 1500x450 mm 13.26 800.00 Sqm 214.30 171440.00 AT Par 171440.00

mm thickness over plastered surface to prepare the surface even and smooth complete. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () E-Part-E CPWD DSR 2021 Items for Augmentation/Provision of Water 1721765.00 Below/P Supply & Sewer System ar 18.9.9 150.00 Metre 2811.75 421762.50 AT Par 421762.50 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl

brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work // 100 mm nominal dia Pipes 18.10.6 200.00 Metre 893.20 178640.00 AT Par 178640.00

fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 50 mm dia nominal bore 18.10.3 150.00 Metre 491.20 73680.00 AT Par 73680.00

fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 25 mm dia nominal bore 18.18.3 10.00 Each 399.15 3991.50 AT Par 3991.50

approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal bore 18.17.4 4.00 Each 878.25 3513.00 AT Par 3513.00

C.I. wheel of approved quality (screwed end) : // 50 mm nominal bore 18.48 15000.00 Litre 9.70 145500.00 AT Par 145500.00 Description:- WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and

and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 12.41.2 200.00 Metre 319.75 63950.00 AT Par 63950.00 Description:- ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of

Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter 12.42.5.2 20.00 Each 132.00 2640.00 AT Par 2640.00 8 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 8 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degrees // 110 mm bend 12.42.6.2 20.00 Each 115.95 2319.00 AT Par 2319.00 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/

jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Shoe (Plain) // 110 mm Shoe 19.6.4 100.00 Metre 902.05 90205.00 AT Par 90205.00 Description:- DRAINAGE // Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

standard design: // Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : // 300 mm dia. R.C.C. pipe 23.3.2 50.00 Metre 668.50 33425.00 AT Par 33425.00 Description:- RAIN WATER HARVESTING & TUBEWELLS // Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire &

per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. // Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer - in-charge. // 150 mm nominal size dia 6.1.1 30.00 cum 6882.00 206460.00 AT Par 206460.00

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand) 4.1.6 20.00 cum 6670.25 133405.00 AT Par 133405.00 Description:- CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in

up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) 5.22A.6 1000.00 Kg 89.65 89650.00 AT Par 89650.00

for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.1.2 20.00 cum 8364.20 167284.00 AT Par 167284.00 Description:- REINFORCED CEMENT CONCRETE // CAST IN SITU // Providing and laying in

finishing and reinforcement - All work up to plinth level : // 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 2.8.1 100.00 cum 286.85 28685.00 AT Par 28685.00 Description:- EARTH WORK // Earth work in excavation by mechanical means (Hydraulic

sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil. 5.9.3 100.00 Sqm 766.55 76655.00 AT Par 76655.00

including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () F-CPWD DSR 2021 Items for Conversion of Existing 3rd Floor into Staff 4644721.10 Below/P Lobby Cum Store & Renovation & Repair Work at FF ORH. ar 15.2.1 10.00 cum 2007.10 20071.00 AT Par 20071.00

mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 15.56 250.00 Sqm 45.05 11262.50 AT Par 11262.50 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY

joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within

doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 15.7.4 15.00 cum 1698.45 25476.75 AT Par 25476.75

mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar 15.12.1 25.00 Each 302.70 7567.50 AT Par 7567.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area 3 sq. metres and below 15.12.2 10.00 Each 414.55 4145.50 AT Par 4145.50

windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area beyond 3 sq. metres 15.18 1000.00 Kg 4.65 4650.00 AT Par 4650.00

angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.60 200.00 cum 219.35 43870.00 AT Par 43870.00 Description:- DISMANTLING AND DEMOLISHING // Disposal of building rubbish / malba / similar

unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15.23.1 400.00 Sqm 60.50 24200.00 AT Par 24200.00

in cement mortar including stacking material within 50 metres lead. // For thickness of tiles 10 mm to 25 mm 6.1.1 10.00 cum 6882.00 68820.00 AT Par 68820.00

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand) 6.4.1 80.00 cum 8512.10 680968.00 AT Par 680968.00

of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:4 (1 cement : 4 coarse sand) 13.1.1 1000.00 Sqm 294.85 294850.00 AT Par 294850.00

1:4 (1 cement: 4 fine sand) 8.2.2.2 20.00 Sqm 4425.35 88507.00 AT Par 88507.00 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab over 0.50 sqm 8.2.2.1 80.00 Sqm 4679.35 374348.00 AT Par 374348.00 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab upto 0.50 sqm 8.31 200.00 Sqm 1063.45 212690.00 AT Par 212690.00 15 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 15 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.37 150.00 Sqm 935.60 140340.00 AT Par 140340.00 Description:- FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor

to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41.2 250.00 Sqm 1416.65 354162.50 AT Par 354162.50 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm 10.16.2 500.00 Kg 168.95 84475.00 AT Par 84475.00 Description:- STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow

approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished seamless type tubes 10.25.2 500.00 Kg 142.30 71150.00 AT Par 71150.00 Description:- STEEL WORK // Steel work welded in built up sections/ framed work, including

structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.28 200.00 Kg 612.25 122450.00 AT Par 122450.00 Description:- STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 9.147D.2 40.00 Sqm 10030.30 401212.00 AT Par 401212.00 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. // Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.48.2 500.00 Kg 197.70 98850.00 AT Par 98850.00 Description:- WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing

including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc. 21.3.1 40.00 Sqm 1019.80 40792.00 AT Par 40792.00 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners 23 of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 9.12 20.00 Sqm 148.50 2970.00 AT Par 2970.00 Description:- WOOD AND P.V.C. WORK // Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, (weight not less than 10 kg per sqm)

screws. // Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 9.20.1 60.00 Sqm 3086.10 185166.00 AT Par 185166.00 Description:- WOOD AND P.V.C. WORK // Providing and fixing 25 mm thick shutters for cup

decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. // 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 26.24.1 120.00 Sqm 2748.85 329862.00 AT Par 329862.00 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x

expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size

the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. // With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles 26.23.1 80.00 Sqm 2055.65 164452.00 AT Par 164452.00 Description:- NEW TECHNOLOGIES AND MATERIALS // Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile

15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. // With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles 18.8.2 80.00 Metre 513.75 41100.00 AT Par 41100.00 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY

Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 20 mm nominal dia Pipes 18.8.3 80.00 Metre 626.05 50084.00 AT Par 50084.00 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 25 mm nominal dia Pipes 22.14.1 10.00 cum 7510.75 75107.50 AT Par 75107.50

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 18.15.2 20.00 Each 327.95 6559.00 AT Par 6559.00

approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal bore 18.22.2 10.00 Each 190.10 1901.00 AT Par 1901.00

unions : // Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : // 150 mm diameter 12.50 20.00 Sqm 671.55 13431.00 AT Par 13431.00 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120

sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 17.4.1 2.00 Each 5268.85 10537.70 AT Par 10537.70 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes

brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : // One urinal basin with 5 litre white P.V.C. automatic flushing cistern 17.2.1 8.00 Each 5540.55 44324.40 AT Par 44324.40 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal

cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid 17.1.1 4.00 Each 5781.35 23125.40 AT Par 23125.40 Description:- SANITARY INSTALLATIONS // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 17.71 8.00 Each 146.30 1170.40 AT Par 1170.40 Description:- SANITARY INSTALLATIONS // Providing and fixing PTMT liquid soap container 109

materials with snap fittings of approved quality and colour, weighing not less than 105 gms. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 17.10.1.1 1.00 Each 6008.45 6008.45 AT Par 6008.45 Description:- SANITARY INSTALLATIONS // Providing and fixing Stainless Steel A ISI 304 (18/8)

fittings and brackets, cutting and making good the walls wherever required : // Kitchen sink with drain board // 510x1040 mm bowl depth 250 mm 9.165.1 60.00 Each 100.45 6027.00 AT Par 6027.00

bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. // 125 mm 9.100.1 60.00 Each 60.05 3603.00 AT Par 3603.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 125 mm 9.96.2 60.00 Each 234.90 14094.00 AT Par 14094.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : // 250x16 mm 9.101.1 30.00 Each 35.50 1065.00 AT Par 1065.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. // Single rubber stopper 9.97.2 30.00 Each 104.40 3132.00 AT Par 3132.00 Description:- WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL

not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 250x10 mm Per bag of 13.21 200.00 cement of 60.55 12110.00 AT Par 12110.00

Description:- FINISHING // PEBBLE DASH PLASTER // Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 13.22 200.00 Sqm 72.80 14560.00 AT Par 14560.00

more than 10 m from ground level for every additional height of 3 m or part thereof. 13.98.1 500.00 Sqm 90.85 45425.00 AT Par 45425.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

emulsion paint of approved brand and manufacture to give an even shade: // One or more coats on old work 13.91 1300.00 Sqm 20.85 27105.00 AT Par 27105.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13.99.1 800.00 Sqm 86.55 69240.00 AT Par 69240.00 Description:- FINISHING // Applying priming coats with primer of approved brand and

enamel paint of approved brand and manufacture of required colour to give an even shade : // One or more coats on old work 13.48.1 200.00 Sqm 158.95 31790.00 AT Par 31790.00 Description:- FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint

coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 9.47.2 50.00 Metre 159.35 7967.50 AT Par 7967.50

nickel plated M.S. pipe curtain rods with nickel plated brackets : // 25 mm dia (heavy type) 5.30 100.00 Metre 64.70 6470.00 AT Par 6470.00 Description:- REINFORCED CEMENT CONCRETE // Providing and fixing sheet covering over 53 expansion joints with iron screws as per design. // Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 11.5 50.00 Sqm 928.65 46432.50 AT Par 46432.50 Description:- FLOORING // 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 17.32.2 10.00 Each 1158.95 11589.50 AT Par 11589.50

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 453x357 mm 17.32.4 10.00 Each 1817.20 18172.00 AT Par 18172.00

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : // Rectangular shape 1500x450 mm 13.26 800.00 Sqm 214.30 171440.00 AT Par 171440.00

mm thickness over plastered surface to prepare the surface even and smooth complete. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () G-Part-G CPWD DSR 2021 Items for Provision of Lift(1 No.) Civil Work 3621252.00 Below/P Only ar 2.8.1 50.00 cum 286.85 14342.50 AT Par 14342.50 Description:- EARTH WORK // Earth work in excavation by mechanical means (Hydraulic

sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil. 4.1.5 10.00 cum 6833.40 68334.00 AT Par 68334.00 Description:- CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in

up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 5.1.2 20.00 cum 8364.20 167284.00 AT Par 167284.00 Description:- REINFORCED CEMENT CONCRETE // CAST IN SITU // Providing and laying in

finishing and reinforcement - All work up to plinth level : // 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 5.9.2 60.00 Sqm 669.55 40173.00 AT Par 40173.00

including strutting, propping etc. and removal of form for // Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 4.3.1 50.00 Sqm 307.95 15397.50 AT Par 15397.50

including strutting, propping etc. and removal of form work for : // Foundations, footings, bases for columns 4.3.3 60.00 Sqm 804.25 48255.00 AT Par 48255.00

including strutting, propping etc. and removal of form work for : // Columns, piers, abutments, pillars, posts and struts 5.2.2 15.00 cum 10185.05 152775.75 AT Par 152775.75 Description:- REINFORCED CEMENT CONCRETE // CAST IN SITU // Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,

level, excluding cost of centering, shuttering, finishing and reinforcement : // 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 5.22A.6 2000.00 Kg 89.65 179300.00 AT Par 179300.00 Description:- REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement

above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY 5.9.3 70.00 Sqm 766.55 53658.50 AT Par 53658.50

including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform 5.9.5 40.00 Sqm 608.35 24334.00 AT Par 24334.00

including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressumers and cantilevers 6.1.1 15.00 cum 6882.00 103230.00 AT Par 103230.00

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand) 6.4.1 20.00 cum 8512.10 170242.00 AT Par 170242.00

of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:4 (1 cement : 4 coarse sand) 10.2 1000.00 Kg 111.95 111950.00 AT Par 111950.00

trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.16.1 9000.00 Kg 154.90 1394100.00 AT Par 1394100.00 Description:- STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow

approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubes 10.19 1000.00 Kg 88.50 88500.00 AT Par 88500.00

and washer plates complete. 10.20 500.00 Kg 140.15 70075.00 AT Par 70075.00 16 Description:- STEEL WORK // Providing and fixing bolts including nuts and washers complete. 10.28 400.00 Kg 612.25 244900.00 AT Par 244900.00 Description:- STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 13.1.1 200.00 Sqm 294.85 58970.00 AT Par 58970.00

1:4 (1 cement: 4 fine sand) 10.25.2 800.00 Kg 142.30 113840.00 AT Par 113840.00 Description:- STEEL WORK // Steel work welded in built up sections/ framed work, including

structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 15.2.1 10.00 cum 2007.10 20071.00 AT Par 20071.00

mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 15.56 200.00 Sqm 45.05 9010.00 AT Par 9010.00

joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within

angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.7.4 15.00 cum 1698.45 25476.75 AT Par 25476.75

mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar 15.60 200.00 cum 219.35 43870.00 AT Par 43870.00 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY

unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 8.2.2.2 50.00 Sqm 4425.35 221267.50 AT Par 221267.50 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab over 0.50 sqm 8.2.2.1 30.00 Sqm 4679.35 140380.50 AT Par 140380.50 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab upto 0.50 sqm 2.25A 100.00 cum 368.65 36865.00 AT Par 36865.00

mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () D1-Part-D1 NS Items for Renovation & Conversion of Existing 2nd Floor 540022.55 Below/P into ORH ar NS1 14.00 Each 19900.47 278606.58 29.32 360294.03

similar as approved by engineer inchargewith all contractors , material labour tools and plants etc NS2 14.00 Each 9927.12 138979.68 29.32 179728.52

Somany design cat-110455 or similar as approved by engineer inchargewith all contractors , material labour tools and plants etc.