SR to HL bridge over Gadiajore nallah on Kansil to Bhairgubha road such as Painting of Bridge repair of Approach, Fix of Guard stone ,Board under Bangomunda Block for the year 2025-26

Clearing and grubbing road land including uptooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposalof top organic soil not exceeding 150 mm in thickness. etc. complete. as per direction of the Engineer-in-charge .

Providing and applying two coats of Enamel paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint @ 1 litre per 2 Sqm etc. complete in all respect as per specification and direction of the Engineer-in-charge

Rough stone dry packing in approns & revetments with h.g. stone boulder etc. complete in all respect as per specification and direction of the Engineer-in-charge

Providing,fixing R.C.C guard post on approach Road using 7.50 kg steel in each guard post etc. complete in all respect as per specification and direction of the Engineer-in-charge

Providing , laying,spreading & compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing ,rolling with 3 wheeled roller 8-10 tonnes in stages to proper grade & camber etc complete as per direction of Engineer-in-charge.

Providing and apppying Primer coat with bitumen Emulsion using emulsion pressure distributer at the rate of 0.60kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification CL-502.

Providing and apppying tack coat with bitumen Emulsion using emulsion pressure distributer at the rate of 0.40kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification CL-503.

Providing 20 mm thick primix carpet over prepared surface using a total quantity of 0.23 cum of 12 mm to 6 mm chips with 1.59 kg of bitumen for 0.028 cum of chips and tack coat of 9.07 kg of 80/100 grade bitumen per 10 sqm and compacting with 8T-10T power roller etc complete.

Providing an laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6mm size chips and down graded as per sieve aalysis and 6.8Kg. of bitumen per 10 sqm and rolling with PRR including hire and running charges of PRR, bitumen mixer, tar boiler with cost, conveyance, royality of materials, labour, T&P, etc. complete.

Construction of embankment with materials obtained from borrowpits with all lead spreading , grading to required slope and compacting to meet the required table 300-2. etc. compete as per direction of the Engineer-in-charge .