Establishment of Integrated Public Health Laboratory at PMPMCH building of DHH, Angul for the year 2025-26 (Civil, EI, PH)

Part-A (Civil Work) Flooring VENYL FLOORING :-Providing and laying of antistatic homogeneous vinyl flooring of 2.0 mm to 2.5 mm thick, conforming to IS:3462 or equivalent international standards, over a smooth, dry, and clean sub-base with approved adhesive, including necessary cutting, trimming, and sealing of joints, as directed by the Engineer-in-Charge. Technical Specification: Type: Homogeneous/Antistatic Vinyl Sheet Flooring Thickness: 2.0 mm / 2.5 mm (as specified) Composition: Polyvinyl Chloride (PVC) with conductive carbon coating (for antistatic property) Fire Retardant: As per IS:3462 Slip Resistance: R9 or higher Resistance to Bacterial Growth: Fungus and microbial resistant Electrical Resistance (for antistatic type): 10⁶ – 10⁹ ohms Colour/Finish: As approved by Engineer-in-Charge (matte/semi-gloss finish suitable for laboratory) Approved grade synthetic rubber-based or acrylic adhesive suitable for vinyl flooring (e.g., Fevicol SR 505 or equivalent). Applied uniformly with a notched trowel. Ground Floor

3rd Floor

PANELLING WOODEN PANELLING WITH VINEER:- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick bwr ply , finished with 1 mm thick texture / suede vineer complete with necessary Hardwood, skirting , mouldings & teak wood beading on the edge etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete. The exposed frame work shall be finished with matt finsish enamel paints / polish with mellamine to match with the shade of the Laminates. Ground Floor

3rd Floor

Partition Providing and fixing 32mm thickFlush Door shutter confirming to IS:2002 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of Stainless steel But Hinges(100mmx60mmx2.5mm),40mm stainless steel screws, CylindricalLock(Godrej-9843), Tower Bolt SS10x300mm (Bath room ) (Godrej-3264) , PVC Door Buffer with SSscrew, teak wood leaping around the edges & paste with1.5 mm thick laminate on both side of the flush door, etc incuding the cost of all materials, hard ware fittings, cost all labour, conveyance, loading unloading, T&P etc. complete as per the direction of Engineer -in charge. D1

DRY WALL PARTISION:- Supply and Installation of sound wall 100 mm thick partion on either side with a combination of 10 mm magnesium oxide board plus 2.5 mm thick Tecsound 50 plus 12.5 mm Gypboard combination drywall partition system having (high water & fire resistance) which includes system layers on either side of above mentioned layers of anutone make tufbloc magnesia square board having square edge & size 2400 X 1200 x 12 mm to be fixed on the top then inner layer Tec sound 50 then gypsum board with the frames on either side of the GI stud channel framework in horizontal position of length side board. Now the frame work includes Floor / Head ( FC 50 ) channels having thickness 0.06 mm length 3600 mm ,equal flanges of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm centers staggered noise & fire rated silicon sealant to caulked along the perimeter of the partition frame before fixing channels.Then stud channels SC 48 having thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm should be placed into the floor / head channels positioned vertically at 600 mm centers. Horizontal intermediate channel at 1200 mm centers to locked with the vertical studs. Extra reinforcement to be provided at openings ( Doors & Window ). Apply Synthetic poly fiber 5x25 is 25 mm width,600/1200 mm density 500 gsm filled between the studs & held in position by using adhesive pasting on the board. Now, boarding is to done on each side of studs framework in a staggered pattern by the help of self drilling screw at 300 mm centers. After boarding of two boards jointing & finishing is to be done by joint compound . The flush look will appear as magnesia boards after sanding the two boards joint properly to get a smooth look . The technical parameters of the boards - Density- 1000 kg / mt cube weight 10 kg/ mt sq , Fire -150 min acoustic STC - 50 db, climate OCRH - 50 ,99 Termite resistance - yes, Moister absorbent - 6.8% after 2 hr, wet expansion less than -0.02% from ambient to saturation ,Moister Movement - 0.02% Green - RC % - 30 Strength - Anti sag. Test reports of manufactures are to submitted at the time of delivering of materials. All wooden support will be charged extra.

FIXED FURNITURE SHELF BELOW BASIN COUNTER :- Providing and fixing of shelf below counter made out of 19mm thick bwr ply and finished with 1mm thick texture/ suede LAMINATE, and the wooden lipping polish with mellamine to match the laminate shade as per the detail design and approved by the EIC. ( crech) ( Basic cost oftexture laminate is Rs 55.48/- sft ) 3rd Floor

LOW HEIGHT STORAGE :-Providing & fixing of 750mm low height storage made out of 19 mm thick bwr ply, 6 mm thick bwr ply at out side & laminated with 1mm thick sued / texture laminate on out side & 0.8 mm thick laminate at in side , the exposed wooden surface edge binding to match the laminate with central locking, shutters with autoclosing hinges and handles. Including all cost of labour , taxes T & P etc as per the detail design & specificatio approved by EIC . ( Basic cost of texture laminate is Rs 55.48/- sft ) Ground Floor

3rd Floor

FULL HEIGHT STORAGE 450 width :-Providing & fixing of Full height storage made out of 19 mm thick bwr ply , 6 mm thick bwr ply at out side & laminated with 1 .0 mm thick sued/TEXTURE laminate on out side & 0.8 mm th laminate at in side , the exposed wooden surface polished with mellamine or painted with automotive paint with central locking, shutters with autoclosing hinges and handles. Including all cost of labour , taxes T & P etc as per the detail design & specification approved by EIC . ( Basic cost oftexture laminate is Rs 55.48/- sft ) Ground Floor

1st floor

3rd Floor

OVER HEAD STORAGE :- Providing and fixing of over head storage cabinet of depth 450 mm with out drawer with 19mm th bwr & 6 mm th bwr ply wood at the back side and finished with 1.0 mmth texture / suede laminates,8mm th glass in shutter and finished the teak wood lipping with mat finish enamel paint or polish with mellamine to match the laminate shade , internal surface finished with 0.8 mm th laminate as per the detail design and approved by the EIC. ( Basic cost oftexture laminate is Rs 55.48/- sft ) Ground floor

3rd Floor

Architectural Finishes DECORATIVE CLADDING:- Supplying and fixing of MCM Modified Clay Material ‐ MCM Slate Stone/Oasis Stone/Travertine/Sandstone of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15 Ground floor

3rd Floor

Providing painting two coats with plastic emulsion paint over one coat of primer ncluding all cost of labour, materials, T&P and all taxes etc. complete as per direction of E.I.C. 3rd floor

SOFT FURNISHING BLACKOUT ROLLER BLIND :- Providing and fixing of manual Roller Blinds comprising of opaque fabric with 0% openness comprising of 100% Polyester with Acrylic coated(PVC free)of weight 275gsm, Thickness 0.50mm and Shrinkage%(Warp<5%).The Roller blind system consists of Tube ID 38mm & OD 40mm x 1.5mm wall thickness, extruded out of Aluminium alloy 6063 T6 with silver anodized to provide an everlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low – flexing braided polyester cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated Aluminium flat bottom rail of 290 gm to finish it from the ends it should have rail end caps. The clutch will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 5 Kgs of material. The clutch should mount flush to the face of the bracket which minimizes the light gap between the shade and the window frame. inclusive of all cost of labour,materials, As per the detail design & specification. approved by eic .( Basic price Rs 2645.00 / sqm ) 3rd floor

MODULAR FURNISHING Supplying ,Fitting and fixing of stainless Steel of 304 grade in table leg using 100mm dia of 3mm thick circular pipe

Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.

PRODUCT : Revolving chairs

Dumb Waiter lift

SIGNAGES AND WAYFINDING Providing and Fixing of WPC boards of sizes as mentioned below along with 3D letter inlays on the same with the required letters to be approved by the Architect/ EIC. Samples have to be approved by the concerned before execution. The rate is inclusive of the WPC board with fixing of the same along with Rates, Taxes, T&P all inclusive. 450mmx 300mm

FALSE CEILING METAL CEILING - Providing & Fixing of Multi-C GS Metal false ceiling system, SCHEPPER/HUNTER DOUGLAS/ALWOOD featuring panels with dimensions of 60mm/ 135mm/ 210mm wide x 15mm deep x 25mm Flange and length up to 5 meter, creating a unique configuration with a 16mm grove between two panels. The panels are constructed from 0.5mm TCT galvanized and will be securely affixed to carriers. To enhance Fadedness Resistivity, the visible surfaces of the panels will undergo a wooden Powder coating process. The carriers, designed for stability and durability, have dimensions of 20mm width at the bottom, 40mm depth, and are made from 0.60 galvanized steel with a black coil coated metal sheet. They feature protruding ears strategically positioned to hold the panels at a module of 76mm/ 151mm/ 226mm center to Center. For installation, Gi rod 4mm shall be fixed on Anchor Fastener into the slab at distance, not more than 1.2mtr. Centre to center on which will be laid with corrosion proof ss clip and on this rigid structure carrier shall be fixed horizontally at 1mtr. To 1.2mtr. Centre to center. The panel shall be clipped in carriers. Customized J Angle will be fixed on the periphery wall. This comprehensive system ensures a robust and visually appealing solution for various architectural applications The rate shall be including all cost of materials , labour, overheads T & P etc., complete. as per the detail design and specification approved by Engineer -in-charge /Architect . Ground floor

3rd Floor

Part-B (E.I Works) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. NB:All the electrical,Fire fighting,HVAC,ELV drawings, Technical Data Sheets & make will be approved by SE R& B Electrical circle & CE Building ,Odisha ,Bhubaneswar prior to execution of the work. Group A

Group B

Group C

Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/-Schneider(Zencelo)/PANASONIC(VISION)

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.(Make :Legrand(Myrius)/-Schneider(Zencelo)/PANASONIC(VISION)

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Supply, delivery, installation, testing and commssioning of modular type TV Antenna Outlet Boards containing a ISI marked Modular TV Antenna/Telephone Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge.

Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ BEC/ Precision/ Norpak 20 MM

Fittings & Fixtures Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

Supply of 20 watt surface mounted indoor type battern LED Luminaire with LED GLARE FREE opal diffuser , IP20 Efficency 120-130lm/w luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

SITC of 25watt srtrip Light of 5 mtr with driver Surface mounted indoor type LED Luminaire with LED GLARE FREE opal diffuser , IP20 Efficency 120-130lm/w Lamp complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE:PANASONIC/PHILIPS/HALONIX/CROMPTON/WIPRO/HAVELLS/LT

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA (Model.Turbo HDEF 1400 RPM ISI)/Eq. model of /Havells/ ALmonrad/ Crompton

Supplying, installation, testing and commssioning of 1200 mm sweep BLDC ceiling fan with aluminium blades having wattage not more than 28W and Air delivery ≥ 215(m3/min) Make-USHA(Teohnix)/Crompton(Energion Groove)/Havells(Efficiencia Neo ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)

Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge. MAKE: FINOLEX/ KEI/ POLYCAB/HAVELLS/RR CABLE 3.5 core x 25 sq mm Aluminium armoured Cable.

Supply Installation, Testing & Commissioning of following split ac wide angle power throw with 100% cooper condense inverter technology ,Eco mode,Smart detect technology with 230v /50hz/ Iph inverter series air conditioning 3star rated for best energy efficient Inverter split Air-conditioner with all accessories, cordless remote & of cooling capacity fitted with rotary compressor with minimum 5 year warranty along with copper condenser unit operating on refrigerant R-32/Non CFC suitable for high wall mounting & suitable for operation on 230 Volt, 50HZ, Single phase AC supply. ( with Kit of 3 Mtrs) with high engery efficency with compact indoor unit facilities easy installation Inverter version including feactures fresh air intake ,sleep & timer controller.The sensor should detects the floor temperature and automatically adjusts the operation of the indoor unit to reduce the temperature difference between the ceiling and the floor Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping. .Make: TOSHIBA/MITUSUBUSHI/HITACHI/O GENERAL Nominal Capacity - 2 TR single phase

SITC of 5KVA Voltage stabilizer (90V - 300V) Model- VEW 500 Plus (Make:- V-Guard)

Supply, installation, testing & Commissioning of following sizes stand for outdoor machine support complete with making good the damages caused as required and as per Direction of Engineer-In-Charge.

Part-C (P.H Works) Internal &Ext.PH work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe

25mm dia dia C - PVC pipe

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)

Elbow action Bib cock(Jaquar)FLR-SSF-5043N

15mm dia CP Body Bib cock (Con-CHR-107KN Jaquar make)

25mm dia brass full way valve (Shakti make)

32mm dia brass full way valve (Shakti make)

15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)

15mm CP Extension piece

125mm CP grating

15mm size C.P. flange

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. EWC. PlainHindware/Parryware/Neycer make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal

Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. Porcelin Sink (600 x 450 x 200)

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail

Towel ring

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf CP/NP guard rail

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm Size Mirror.

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge