Construction of Town Hall (Ccapacity appx. 800 - 900 person) at Hanumangarh Junction

Amount

Interior WORK

Providing and fixing acoustic ceiling with using ecogyp plain and perforated gypsum board of size 1200mmx600mmx12.5mm thick with 50mm thick Synco PF acoustic gypsum boards with acoustic perforation - square 5x5mm c/c. Plain gypsum board of size 1800 x 1200 x 12.5mm andSynco PF Polyster wool of Ecotone make 50mm/1000 GSM. The acoustic Design panels should be with tapered long edges for easy joint filling, The acoustic Design panels are furnished with a grey (white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887)Full perforated – A2-s1,d0 (C1) Fixing :- Strut Suspended ceiling system consisting of suspended Angle is fixed to the ceiling with Anchor Bolt at every 1200 c/c then the GI Main Channel is tied to the perimeter rods and Wall Channel is screw fixed to masonry wall along the perimeter, The tiles to meet the safety requirements of EN 14190.should be in accordance with EN 13501-1 to achieve fire classification A2-s1. Specification by architect including all accessories, material & labour complete as directed by Engineer.

Plain Gypsum False ceiling

Providing & laying M/F Suspended single layer of 12.5mm tapered edge Gypsum Board ceiling , which includes metal frame work with using CS55, IC91, PC55, CA55 CRP surface ribbed perimeter channels with the help of nylon sleeves and screws at 610mm centres along the perimeter of ceiling. Then Ecotone CRP surface ribbed intermediate channels of size 45mm from the soffit at 1220mm centres with Ecotone™ CRP surface ribbed ceiling angle fixed to soffit with cleat and steel expansion fasteners. Then Ecotone™ CRP surface ribbed Ceiling section are then fixed to the Ecotone™ intermediate channel with the help of connecting clip and in direction perpendicular to the Ecotone™ intermediate channel at 457.5mm centres. Single layer of 12.5mm Gypsum boards are then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound, Joint Paper tape and two coats of Drywall Top Coat. Rates shall be inclusive of cost of making cut outs/openings for electrical fixtures, tube lights /air-conditioners grills, diffusers etc. & providing additional sections for strengthening the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC . Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided . Only plan area shall be considered for payment. All curved surfaces, recesses, waffles and corbellings shall be part of the false ceiling & flat area in plan shall be measured for payment (Section must from EcotoneTM Brand)The rate shall be in sq.mt. for all floors and at all heights including all costs. The rates are also inclusive of necessary scaffolding, tools, tackles etc. The shop drawing (or a sample mock of 5 sqm minimum of the frame work and ceiling) shall be approved from EIC . Groove shall be provided at the junction of the false ceiling & the wall & including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

Wall Panelling

Panex Aluminum Acoustic Wall Paneling

Providing and fixing acoustical wall panelling with using ecotone make Curve panex alluminum acoustic panle useing with ultra metal frame work to be fixed on wall at every 600mm horizontaly and 600 mm verticaly fixed with the help of Metal cleat by useing IC-91 which is screw fixed directly to the wall and fixing CS 55 on IC91 with help of clip/Screw and where ever required and using glass wool with black felt between framing and panel with technical specification of 48 Kg/m3 and 50MM thick on above CS55 fixing MS specially design carrier bracket and fixing ecotone Panex alluminum Acoustic Panel L-20 of size 30 X 12 X 5 MM make up to 2440mm high as per the following specification :-The panel should be alluminium wooden finished powder coated finishing L-30-5mm @30mm, 30 x 12 x 2440 mm mile grade alluminium base material alluminium special design acoustic panle with clip in system ,5 mm slot perforation @ 300 mm centre, slates perforations, and fixing with the special metal carrier The acoustic should be furnished with a Black absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887),NRC : should be Up to 0.90,should meet the safety requirements of EN 14190. The colour of panel Teak/Maple/Mahoghani/Beach or as approved by Architect and as specified including all accessories, material & labour complete as directed by Architect / Engineer – in – charge.( Make:- Ecotone/ Off / Sound Easy)

Clara Fabric Wall Paneling

Providing and fixing CLARA acoustic wall paneling using ecotone make CLARA Stretch Fabric, fixing with EG 15 Griper system using SONIDO acoustic board with primer of size 1200 x 600 x 15mm,Tracks ( Perimeter Track , Half wrap, mid seam whatever is required) fixed directly by stamping to the CS55/IC91 which is screw fixed directly to the wall along the perimeters with backing of ecotone make SONIDO acoustic board with primer of size 1200 x 600 x 15mm Panels with fixed horizontal/Vertical to the wall at 300mm c/c & Synco P.F. 10mm with Sound Stick Silicon adhesive used as backing material. As per manufactures specification. High NRC, class A fire rating, Fire Hazard Classification of class I or A in accordance with ASTM E-84 or UL- 723 testing parameters, The color shade of Fabric as approved by Architect including all accessories, material & labor complete as directed by Engineer. with provision of all necessary Test Certificates submitted by Ecotone Acoustic.( Make:- Ecotone Acoustics /Grid Square / Sound Box)

Acoustic Doors

Providing & fixing of teakwood Four side door frame of section 150x65mm along with fire and smoke in tumescent seal strip of size 12mmx4mm for 120 minutes fire rated and rw 35db acoustic door with minimum thickness of 93mm having infill of 45mm thick resin bonded glass wool of 48kg/m3 density sandwiched by two 12mm thick magnesium board (edge to edge on internal hardwood frame)and cladded with 6mm thick commercial ply facing and 3mm sheet rubber interlayer T. And finished with 1mm thick laminate as per designer and 25mm thick teakwood frame around the door panel as shown in the drawing. The board shall be resistant to vermin, mold growth, minor impact, abrasion and short term water attack and shall be in color as approved by the designer, the door shall have acoustic seal in door rebates and drop dead seal at the bottom of the door, the sound reducing doors also include door closer, door coordinator, panic bar with outside key and including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size 2.40 x 1.50 (ecotone/off/sound better)

Flooring

Carpet Flooring

Supply and fixing of Loope Pile Carpet of Pile Fiber: 100% Bcf Polypropliene Yarn Construction & Type: Solution Dyed Bulk Continuous Filament Machin Gauge & Stich Rate: 2.54mm (1/10”) 39.4 Rows/100mm, 48/10 Cms. Construction: Loop Pile High Low Scroll Graphic. Density Factor: 189,600 Tufts/Sq.Mts Tufted Pile Weight & Hight: 650 Gm/Sq.Mt, 6mm (5 %+/-) Backing: Primary: Woven Polyproplene, Secondery: Action Back Moth Proffing: Naturally Resistat Bond Strength: 30 Newton Tuff Withdrawal Strength: 20 Newton Flammability: (Astm D 2859-96 & Cpsc-Ff-170) 8 Passes Static Generation: Under 3 Kv Light Fastness: 5+ Usage Area : Commercial Heavy Duty Like Auditiriom Office 7 Heavy Traffic Area with backing of 8mm thick armour fixing on the floor with using favicol SR 505 solution and fixing the carpet above armour including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

Chairs

Supply and fixing of COZY Auditorium chair Seating Arrangements as per below specification including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

(a) Seats Description :-

i. Push back reclined/fix chair.

ii. Auto Tip-up cushion.

iii. Sliding mechanism. Slider with metal Roller and ball will be fitted on the Sidewings.The bottom part of the slidetr will be fixed on the wings support and Top part will be sliding. Cushion will be mounted on slider will be with Auto tip up.

iv. Arm-rest to Arm-rest (centre dist.): 21" to 24" (inches) .

v. PPCP-injection moulded. Housing for Cushion & Backrest.

vi. All sheet metal parts with powder coated.

vii. Arm-rest with cup-holder of PPCP injection molded with skin integral pad/or skin integral Armrest.

viii. seat numbering on back and tip-up portion.

ix. Row numbering for seats along the aisles.

x. Porvision for lights on sides for seats along the aisles.

(b) Fabric :- i. Approved by client from our exciting range of fabric.

(C) Frame :- Black and cushion frame of ERW Tube/IS :307 1976 GRADE,

(d) Polyurethane Foams :- i. Density: 50+_ 5 Kg/M3 / JISK 6401 II. Constant Compression Set: (Max. 13%) JIS K 6401.

(d) Polyurethane Foams :- i. Density: 50+_ 5 Kg/M3 / JISK 6401 II. Constant Compression Set: (Max. 13%) JIS K 6401.

ii. For Push Back mechanism - Coil Spring / Spring Steel IS : 4454 1981 GRADE 2 Wing Components :- HRCA/ CRCA Sheet Metal / IS: 1079 1994 Type O (a) Wing frame 'c' channel or Rectangular Frame. (b) Side wing frame with plywood. With upholstery. (c) Slider - Pushback sliding mechanism. Slider with metal Roller and ball will be fitted on the Sidewings and middle wings. The bottom part of the slider wil be fixed on the wings support and Top part will be slidings. Cushion will be mounted. on slider with Auto tip up. (e) Back & Cushion Hosuing :- PPCP IS: 10915 1994./Injections Molded/ Thermoform Plastic (ecotone cozy/Godrej/wipro)

MINI AUDITORIUM

False Ceiling

Providing and fixing acoustic ceiling with using ecogyp plain and perforated gypsum board of size 1200mmx600mmx12.5mm thick with 50mm thick Synco PF acoustic gypsum boards with acoustic perforation - square 5x5mm c/c. Plain gypsum board of size 1800 x 1200 x 12.5mm andSynco PF Polyster wool of Ecotone make 50mm/1000 GSM. The acoustic Design panels should be with tapered long edges for easy joint filling, The acoustic Design panels are furnished with a grey (white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887)Full perforated – A2-s1,d0 (C1) Fixing :- Strut Suspended ceiling system consisting of suspended Angle is fixed to the ceiling with Anchor Bolt at every 1200 c/c then the GI Main Channel is tied to the perimeter rods and Wall Channel is screw fixed to masonry wall along the perimeter, The tiles to meet the safety requirements of EN 14190.should be in accordance with EN 13501-1 to achieve fire classification A2-s1. Specification by architect including all accessories, material & labour complete as directed by Engineer.

Plain Gypsum False ceiling

Providing & laying M/F Suspended single layer of 12.5mm tapered edge Gypsum Board ceiling , which includes metal frame work with using CS55, IC91, PC55, CA55 CRP surface ribbed perimeter channels with the help of nylon sleeves and screws at 610mm centres along the perimeter of ceiling. Then Ecotone CRP surface ribbed intermediate channels of size 45mm from the soffit at 1220mm centres with Ecotone™ CRP surface ribbed ceiling angle fixed to soffit with cleat and steel expansion fasteners. Then Ecotone™ CRP surface ribbed Ceiling section are then fixed to the Ecotone™ intermediate channel with the help of connecting clip and in direction perpendicular to the Ecotone™ intermediate channel at 457.5mm centres. Single layer of 12.5mm Gypsum boards are then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound, Joint Paper tape and two coats of Drywall Top Coat. Rates shall be inclusive of cost of making cut outs/openings for electrical fixtures, tube lights /air-conditioners grills, diffusers etc. & providing additional sections for strengthening the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC . Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided . Only plan area shall be considered for payment. All curved surfaces, recesses, waffles and corbellings shall be part of the false ceiling & flat area in plan shall be measured for payment (Section must from EcotoneTM Brand)The rate shall be in sq.mt. for all floors and at all heights including all costs. The rates are also inclusive of necessary scaffolding, tools, tackles etc. The shop drawing (or a sample mock of 5 sqm minimum of the frame work and ceiling) shall be approved from EIC . Groove shall be provided at the junction of the false ceiling & the wall & including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

Wall Panelling

Marco Polysterfiber Wall Paneling

Providing and fixing Ecotone make 12 MM thick grooved Marco acoustic wall paneling using ecotone make Marco polyester fiber grooved acoustic panel fixed directly by stamping to the CS55/IC91 which is screw fixed directly to the wall along the perimeters with backing of ecotone make synco P.F 50 MM thick fixed horizontal/Vertical to the wall used as backing material and fixing macro Acoustic panel on CS55 with solution SR998 or silicone as required As per manufactures specification. High NRC, class A fire rating, Fire Hazard Classification of class I or A in accordance with ASTM E-84 or UL- 723 testing parameters, The color shade of Panel as approved by Architect including all accessories, material & labor complete as directed by Engineer.

Flooring

Carpet Flooring

Supply and fixing of Loope Pile Carpet of Pile Fiber: 100% Bcf Polypropliene Yarn Construction & Type: Solution Dyed Bulk Continuous Filament Machin Gauge & Stich Rate: 2.54mm (1/10”) 39.4 Rows/100mm, 48/10 Cms. Construction: Loop Pile High Low Scroll Graphic. Density Factor: 189,600 Tufts/Sq.Mts Tufted Pile Weight & Hight: 650 Gm/Sq.Mt, 6mm (5 %+/-) Backing: Primary: Woven Polyproplene, Secondery: Action Back Moth Proffing: Naturally Resistat Bond Strength: 30 Newton Tuff Withdrawal Strength: 20 Newton Flammability: (Astm D 2859-96 & Cpsc-Ff-170) 8 Passes Static Generation: Under 3 Kv Light Fastness: 5+ Usage Area : Commercial Heavy Duty Like Auditiriom Office 7 Heavy Traffic Area with backing of 8mm thick armour fixing on the floor with using favicol SR 505 solution and fixing the carpet above armour including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

Chairs

Supply and fixing of COZY Auditorium chair Seating Arrangements as per below specification including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.

(a) Seats Description :-

i. Push back reclined/fix chair.

ii. Auto Tip-up cushion.

iii. Sliding mechanism. Slider with metal Roller and ball will be fitted on the Sidewings.The bottom part of the slidetr will be fixed on the wings support and Top part will be sliding. Cushion will be mounted on slider will be with Auto tip up.

iv. Arm-rest to Arm-rest (centre dist.): 21" to 24" (inches) .

v. PPCP-injection moulded. Housing for Cushion & Backrest.

vi. All sheet metal parts with powder coated.

vii. Arm-rest with cup-holder of PPCP injection molded with skin integral pad/or skin integral Armrest.

viii. seat numbering on back and tip-up portion.

ix. Row numbering for seats along the aisles.

x. Porvision for lights on sides for seats along the aisles.

(b) Fabric :- i. Approved by client from our exciting range of fabric.

(C) Frame :- Black and cushion frame of ERW Tube/IS :307 1976 GRADE,

(d) Polyurethane Foams :- i. Density: 50+_ 5 Kg/M3 / JISK 6401 II. Constant Compression Set: (Max. 13%) JIS K 6401.

(e) Spring :- i. For Auto Tip-up or Push back - Torsion Spring/ Spring steel IS : 4454 1981 GRADE 3 (part i)

ii. For Push Back mechanism - Coil Spring / Spring Steel IS : 4454 1981 GRADE 2 Wing Components :- HRCA/ CRCA Sheet Metal / IS: 1079 1994 Type O (a) Wing frame 'c' channel or Rectangular Frame. (b) Side wing frame with plywood. With upholstery. (c) Slider - Pushback sliding mechanism. Slider with metal Roller and ball will be fitted on the Sidewings and middle wings. The bottom part of the slider wil be fixed on the wings support and Top part will be slidings. Cushion will be mounted. on slider with Auto tip up. (e) Back & Cushion Hosuing :- PPCP IS: 10915 1994./Injections Molded/ Thermoform Plastic (ecotone cozy/Godrej/wipro)

Curtain

MAIN CURTAIN

Providing & supplying including stitching decorative main curtain, vertically up down slider in art silk, velvet fabric of approved shade and quality. The curtain shall have 100% gathering cloth complete with bottom silk thread lace and same colour grout up to room height. The curtain shall be with vertical sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorized operation complete with runners, master runners, pullies, 6mm to 8 mm steel wire rope, 1.5 HP three face motor. Air breaker contractors , micro switches for auto stop, push button remote control for forward, reverse and stop positions. The curtain should be vertically up down with maximum gathering position. Hamming and bottom finishing at site etc. complete as directed by E.I.C./Architect of the project. Providing & fixing 35 mm dia road for curtain control equipment with necessary M.S. flat support from ceiling with scaffolding, leveling, necessary M.S. bracket including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size : 16 mtr x 6 mtr

CENTER CURTAIN

Providing & Supplying including stiching decorative main curtain in glazed cotton fabric of approved shade and quality. The curtain shall have 100% gathering cloth complete with botton silk thread lace and same colour grout up to room height. The curtain shall be with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 6mm to 8mm steel wire rope, 1HP motor (crompton) 2nos. Air breaker contractors (L&T/SIEMENS) 2nos. micro switchs for auto stop, 3nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at center should be 900mm. Hamming and bottom finishing at site etc. (a) Providing & Supplying including stiching decorative main curtain in glazed cotton fabric of approved shade and quality. The curtain shall have 50% gathering cloth including bottom silk fringe of same colour or as approved with brass hook suspension etc. complete as directed by E.I.C/Architect of the project. (b) Providing/Fixing 25mm thk. Hard wood platform for curtain control equipment with necessary M.S. flat support from ceiling as per drawing shown by manufacturer. complete with scaffolding, levelling necessary M.S. Brachet with red oxide paint et. including all accessories, material & labour complete as directed by Architect/ Enginner - in - charge.

REAR CURTAIN

Providing & Supplying including stiching decorative main curtain in glazed cotton fabric of approved shade and quality. The curtain shall have 50% gathering cloth complete with botton silk thread lace and same colour grout up to room height. The curtain shall be with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 6mm to 8mm steel wire rope, 1HP motor (crompton) 2nos. Air breaker contractors (L&T/SIEMENS) 2nos. micro switchs for auto stop, 3nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at center should be 900mm. Hamming and bottom finishing at site etc.

CYCLORAMA CURTAIN

Providing & Fixing cyclorama curtain cum screen in plastic perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe. Pipe shall be finished with red oxide paint, including all accessories, material & labour complete as directed by Architect / Engineer - in - charge.

Wings

Providing & Fixing wings(sliding partition) made out of black/blue glazed cotton cloth fixed on wooden frame as per drawing & instruction stated below.: (a) Partition frame shall be made in 75*50 mm with necessary bracking in same thichness in Devdar wood and (soft wood) and as per drg. Light weight partition. (b) Above frame shalll be covered by blue/black colour glazed cotton fabric by black nailing. (C)Top member have sliding fitting in aluminium channel & bearing wheel or in wooden channel etc. including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size : 1.5mtr. X 6 mtr.

Frills

Providing & supplying including stitching glazed cotton colour fabric drop (frill) above the stage. The drop shall have 50% gathering cloth the curtain is to be suspended from G.I. Pipe with string and hooks etc. (a) Providing / Supplying / Fixing 'B' Class 50mm dia. Gi Pipe for curtain/frills,suspension as per drawing shown complete with bend coupling,socket,nut bolt scaffolding if require weldung with one coat of red oxide with nails etc. at site including all accessories, material & labour complete as directed by Architect / Engineer - in - charge.

Palmet

Providing & supplying including stitching decorative pelmet in Art silk velvet fabric of approved shade & quality. The pelmet shall have 50% gathering cloth including bottom silk fringe of same colour or as approved with brass hook suspension with university logo and writing as per your requirement etc. including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size : 18mtr. X 1 mtr.

MIRROR PANELING (GREEN ROOM)

Providing & Fixing 8mm thick mirror of approved make shall be fixed with SS studs. Provision shall be made for concealled light work as per detailed drwaing/instruction of architect complete. including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. BASIC RATE FOR MIRROR 807/SQMT.(M.R.)

Stage table Schedule

The scope including supply and erection /installation of the item on Site .Top with 1mm thick laminate on 19 mm thick.BWR plywood 40x40 mm thick teak wood legs,40x40 mm tie member for lags,modesty panel 1mm thick laminate on 19 mm thick BWR plywood ,provision for pop up box to provide electrical channel for wiring and all electrical points,laminate to approved by client, the rate ar included cost of labour ,and all nacessary Attachment to complit the job as per client also included in side finish with french police ,inside 0.1 wooden mouldede strip,out side 25 mm wooden molded strip with finish complete ,Size 33.5mx0.6mx0.75m

Podium - Schedule

Table750x750x 1000 mm The scope includes supply and erection /installation of the item on site the table area of 19 mm thick BWR plywood.The top surface is finished with high pressure laminate of 1 mm thick the edges of all surfaces with teak wood beading the thickness of top and legswith 40mm ,1no keyboard tray with powder coated,) modesty Pamel :1 mm thick laminate on 19 mm thick BWR Playwood, The rate including labour ,All small Attachment ,and necessary item required to complete the job. as Per Instruction of Engineer in Charge.

Revolving Chair - Schedule

For Electric Work

Supply & Installation, Testing and commissioning of 60 KVA Stabilizer as per standard specification.

Audio, Video and Light System

Main front Left Line array system Passive full-range loudspeaker for indoor installations,2 X 8" speakers, 2 X 1" high-frequency drivers with a concentric double horn, built in 2.5-way crossover, handles up to 500 watt or higher, horns’ 100° x 15° or better throw pattern, frequency response 75 Hz–18 kHz, Sensitivity 1W/1m at 101 dB.

Main front Right Line array system Passive full-range loudspeaker for indoor installations,2 X 8" speakers, 2 X 1" high-frequency drivers with a concentric double horn, built in 2.5-way crossover, handles up to 500 watt or higher, horns’ 100° x 15° or better throw pattern, frequency response 75 Hz–18 kHz, Sensitivity 1W/1m at 101 dB.

Bass array with multiple Passive subwoofermain passive sub woofer speaker,15" neodymium woofer sub woofer Power-handling 600W, Nominal impedance 8 ohms, Maximum SPL122 dB, Sensitivity 1W/1m at 102 dB, Frequency response - 47 Hz- 150 Hz,

Rigging/stacking frame The rigging/stacking frame

Rigging/stacking frame The rigging/stacking frame

Rigging/stacking frame The rigging/stacking frame

Amplifier rack for surround 2-Channel 1600 W power amplifier with

Amplifier rack for Line array two cluster and bass array 2-Channel 2000 W power amplifier with

Amplifier rack for Line array two cluster and bass array 2-Channel 2500 W power amplifier with

Supply, Installation, Testing and Commissioning of Power amp output (peak power) 800 W, Amp type Class AB + D, Max SPL calculated 126 dB, Low-/mid speaker 1x 10", 2" voice coil, Frequency response +/-3 dB 64 Hz – 18 kHz

Passive compact 1 X 8" loudspeaker for installations, Power handling 300W RMS, Power program 600W, Frequency response 89hz - 19Khz.

Supply, Installation, Testing and Commissioning of High-end 24-bit/96 kHz A/D and D/A converter Raised Cosine EQ and Simultaneous Cross-Platform Parameter Adjustments for Loudspeaker Management and System Control conversion at identical sample rate.

Supply, Installation, Testing and Commissioning of 32 input channels, 8 aux channels, 8 FX return channels, 16 aux buses, 6 matrices, main LRC, Internal effects engines, true stereo / mono - 8/16, Connectors XLR inputs - 16 XLR inputs - 8 Aux inputs/outputs, - 6/6 Expansion card slot - 32 channel audio input/output

Supply, Installation, Testing and Commissioning of wired Dynamic Vocal microphone for speech noiseless on/ off switch, Frequency response - 40hz to 20000 Hz,Nominal impedance - 580 Ohm,Pick-up Polar pattern - supercardiod. Max. sound pressure level 144 dB SPL

Supply, Installation, Testing and Commissioning of Cardioid polar pattern on/ off switch, Frequency response - 40hz to 20000 Hz,Nominal impedance - 600 Ohm,Pick-up.Max. sound pressure level 144 dB SPL

Supply, Installation, Testing and Commissioning of Gooseneck microphone with Audio frequency bandwidth70 - 18000 Hz Equivalent noise level - 30 dB-A, Electrical impedance600 Ohms.

Supply, Installation, Testing and Commissioning of stainless steel mic stand with height and angle adjustable, long stand.

Supply, Installation, Testing and Commissioning of stainless steel mic stand with height and angle adjustable,Small stand.

Supply, Installation, Testing and Commissioning of Speaker Cable 14 AWG, Material - TC - Tinned Copper, Operating Temp Range minimum rating -20°C To +80°C,

Supply, Installation, Testing and Commissioning of microphone cable with 1 Pair 22 AWG TC, Shielded, tinned copper pair, PVC jacket.

Supply, Installation, Testing and Commissioning of metal stage box with microphone connector per box 4 mic connectors provision

Supply, Installation, Testing and Commissioning of FIXED projection screen material white black fabric screen size 300" diagonal minimum.

Supply, Installation, Testing and Commissioning of Laser Projector, 7000 lumens or better projector , 3LCD Technology, RGB liquid crystal shutter WUXGA, 1920 x 1200, 16:10 Contrast Ratio Over 2.500.000 : 1

Supply, Installation, Testing and Commissioning of motorized projection screen material white black fabric screen size 160" diagonal minimum and.

Supply, Installation, Testing and Commissioning of lamp, 4200 lumens or better projector , 3LCD Technology, RGB liquid crystal shutter WXGA, 1280 x 800, 16:10 Native Contrast 16,000 : 1

Supply, Installation, Testing and Commissioning of 55" Display, Screen Size - 139.7cm /16:9, HDMI 1.4 (Type A) X2.

Supply, Installation, Testing and Commissioning of super quality stainless steel material expandable squire rode ceiling mount kit with all accessories

Supply, Installation, Testing and Commissioning of Presentation Point with HDMI

Supplying, installation, testing and commissioning of Full HD 1080p60 video, 20x optical zoom plus 16x digital zoom, Control the camera’s functions via USB network, RS485 and RS232 interfaces to control the camera, H.264/H.265 streaming and line-in interface to stream audio and video over IP, Compatible with popular applications such as Microsoft®Teams, Zoom™, GoToMeeting™, WebEx™, ClearOne’s COLLABORATE® Space, and more.

Supplying, installation, testing and commissioning of USB switcher with 6 nos USB input and one USB for Laptop or PC connection one HDMI output and one DVI output, Supports DVI-I / HDMI / VGA, with built-in USB 3.0 Gigabit Ethernet adapter and Audio Mic in and Line Out. Compatible with popular applications such as COLLABORATE® Space, Microsoft® Teams, WebEx™, Zoom™, Google® Meet™, and more. as per technical specification etc. Power Supply: 12 V 2 A, as required.

Controller : Hardware server gateways for AV system control, room scheduling, and AV asset management, Access from a web browser for setup and management, Simplify system or device configuration, deployment, and management with the interactions, flow, and visual elements of a web or mobile app GUI, Atlona Management System (AMS) for configuring Atlona devices over the network, Velocity Cloud, Lite remote configuration and management, Dual Gigabit Ethernet ports for isolating a dedicated AV LAN from the facility or corporate network, Supports industry-standard, network security features and protocols.

Apple Ipad with control app

16 port POE network managed switch

Extends AV AT-UHD-EX-70-2PS 4K/UHD 4K/UHD capability, HDCP 2.2 compliant, Transmits HDMI signals up to 230 ft (70m) @ 1080P and 130 ft (40m) @ 4K/UHD using CAT6a/7 cable., Allows any multi-channel audio stream to be used within a professional audio system.

AT-HDR-H2H-44MA 4x4 Martix switcher Video - UHD/HD/SD (4096×2160@24), Audio - HDMI IN / OUT, Signal Bandwidth-18 Gbps

HT-HDR-M2C HDMI® audio de-embedding and multi-channel audio downmixing for four HDMI sources HDMI Input - 4, HDMi Output 4, Audio Output 4, Video - UHD/HD/SD ( 4096×2160), Analog Output - PCM 2Ch.

12 port network switch 1G speed

Stage Box for HDMI Input at Podium

Supply and laying of 15 Mtrs. HDMI - HDMI Cable

Supply and laying of 25 Mtrs. HDMI - HDMI Cable

Supply and laying of 2 Mtrs. HDMI - HDMI Cable

Supply and laying of STP CAT 6 Twisted Pair Cable.

Supply, Installation, testing and commissioning of all required cable connector for audio and video like VGA, XLR, JACK etc.

Supply, Installation, testing and commissioning of Equipment 32 U Rack for housing all rack mountable equipment's with internal wiring, front glass door; heat dessipation fans; movement wheels, power distribution units etc.

Supply and installation of LEDPAR 3x54 diecast body RGBW DMX control.Built in effects,input voltage 230-250V, 50Hz,3 pin XLR for light DMX control, Power Consumption: 200W Power, DMX Ch. 3,4,5,6,11

Supply and installation of LED powerful single source LED luminaire, Light Source Type: 1x 300 W LED, LED Life Expectancy: Minimum 60.000 hours, Beam angle: 12°, 23°(optional diffuser 28° included), CCT: 2.700 K, 3.000 K, 4.000 K or 6.000 K

300W LED cool light for broadcast grade lighting 3200k/5600k 96 CRI, Dimension 345 x 330 x 96mm Weight 4.5 Kgs/ 9.90 lbs

Supply and installation of Spot Light

Supply and installation of LEDPAR 3x54 diecast body WARM WHITE ,input voltage 230-250V, 50Hz,3 pin XLR for light DMX control, Power Consumption: 200W Power (For stage lighting)

Supply,installation,testing and commissioning of DMX splitter distributer, 8 channel DMX splitter,spectrum make,SDS8, input 220-230 V,AC Power supply,1 U rack mounting with required accessories.(For stage lighting)

Supply , Installation ,Testing and Commissioning of 1024 DMX512 channels 96 Mating fixter Each scanner max available control channels: 40 main channel + 40 trim 60 scenes can be saved, 10 scenes can be run simultaneously 600 steps in a multi scenario

Supply and installation of LED mounting U&C type clamp made out of MS material with necessary screws, anchors , etc as required as per the drawing and direction of engineer in charge.( For stage lighting), XLR male female Connectors and cable tie, Electrical power socket 5 ampere light point.

Supply and Installation of DMX 2 core shielded cable for DMX lighting control as per the manufacturers specifications.(For stage lighting)

PVC Copper unarmoured flexible FRLS, insulated multicore cable 1100V grade, confirming to IS694, size 3cx1.5 sq mm.

Supply and Installation of Lighting Bar fabrication work

Supply and Installation of complete setup with programming of DMX controller for easy operation.

Bidder Name

Amount

M/s Satish Kumar And Company(GSTN-08AAEFS5582M1ZK)

M/S Naresh Kumar Goyal(GSTN-08AQTPG6690B1ZJ)

M/S ASC BUILDERS PRIVATE LIMITED(GSTN-NA)

M/S ASC BUILDERS PRIVATE LIMITED

M/S Naresh Kumar Goyal

M/s Satish Kumar And Company

M/S ASC BUILDERS PRIVATE LIMITED