Repair to P T At Wadji Tal Bodawad Dist Jalgaon

Item No. 1:- Site Cleaning

Item No. 1:- dismantlind pitching including stacking the material as diected with

Item No. 2:- Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift.

Item No.3 :- Excavation in Hard Murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift.

Item No.4:- Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lif

Barrow

Barrow

Item No.7 :Providing and constructing 230 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material. Avaible

Barrow

Item No.8:providing and laying in situ cement concrete of grade m-15

Item No.9: laboratory test concrete for qulity control as per tendre

Item No. 10 :providind and laying m.s.reinforcement including cutting bending wires or tuck welding including cost of binding 10 mm

Item No. 10 :providind and laying m.s.reinforcement including cutting bending wires or tuck welding including cost of binding 10 mm

Item No. 12 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge.

Item No.13 :-Royalty Item as per Estimate ( To be put in tender but % above & below will not be applicable to this item as the royalty has to be paid as per rates decided by Govt of Maharashtra) & as per actual work done on site

Item No.14 :-GST 18 % Item as per Estimate ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra)

Item No.15 :-Insurance 1 % ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra)

Please Enable Macros to View BoQ information