Conservation and Rejuvenation of Khushalsar Lake

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared inside lake using boat and boat men all complete inclyding carriage by MT outside MC limits all complete job.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundation, drains, pipes, cables etc (not exceeding 1.5 meter in width) and for shafts, wells, cesspits and the like not exceeding 10 Sq.M on plan including dressing of sdies and ramming of bottom lift upto 1.5 m, incudding getting out excavated earth and disposal surplus excavated earth as directed in all kinds of soil. (for weed unloading point)

Extra for quntities of work executed in or under water and / or liquid mud, including pumping out water as required at site. (for weed unloading point/)

P/L of stone soling using handpacked stone boulders of 100-230mm n/size. (for weed unloading point/gate pillar/path

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing -all work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40mm nominal size) complete.(for weed unloading point/gate pillar/path

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-all work upto plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

P/F of Centering & shuttering including strutting, propping etc. and removal of formwork all complete. Foundations, footings, bases of columns etc. for mass concrete.

P/F of Centering & shuttering including strutting, propping etc. and removal of formwork all complete. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

P/F of Centering & shuttering including strutting, propping etc. and removal of formwork all complete. Edges of slabs and breaks in floors and walls above 20 cm wide

Steel Reinforcement for RCC work including cutting,bending straightening,placing in position and binding all complete below/ above plinth level using thermo-mechanically treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Construction of Ring-Bund by way of filling empty cement bags with earth/sand including cost of empty cement bags,earth and dewatering wherever required and removal of same after execution of work all complete.

Providing and fixing heavey duty wheels for sliding gate., manufactured from soild forged steel / cast iron, fitted with double ball bearings, complete with rquired nuts, bolts and washers. The wheels shall be of (100 to 1500 ida meter) as per gate size, duly ainc quoted / powder quoted for corriosion resistence, fixed in position as per manufacturers speccifcations including all labour tools, and carriage complete in all rspects.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Carriage of materials by mechanical transport from source to site of work.

Stone soling and stones for avg. lead of 17 kms

20 mm Aggregates for avg. lead of 16 kms

40 mm Aggregates for avg. lead of 16 kms

Sand from Ganderbal for avg. lead of 15 kms

Disposal of excavated earth by mechanical transport outside municipality limits of city