Certain repair to school furniture and other misc furniture at Tibri Mil Stn under GE Gurdaspur.

Amount

ALMIRAH STEEL LARGE (FD-1031) Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as per drg and specified and directed.

M&L for welding to steel almirah large where required not exceeding 2.5cm in length of all as per Drg and specified and directed.

Removing of old unserviceable /broken legs and S &F new legs out of 1.00 mm thick PBI Sheet complete all as shown on Drg and specified and directed.

Removing of old unserviceable locks and S&F new locks to steel Almirah large best quality (as per existing size) as approved by GE complete all as per Drg and specified and directed.

All as per Srl item No 5 above but CP Handle (as per existing size)

Removing of old unserviceable paints and repainting of steel Almirah large with two coat of synthetic enamel paint in side and out side including prep. of surfaces complete all as per Drg and specified and directed.

ALMIRAH MED STEEL (FD-67(M), FD-1032 Removing of old unserviceable locks and S&F new locks to steel Almirah best quality (as per existing size) as approved by GE complete all as per Drg and specified and directed.

All as per Srl item No 8 above but CP Handle

Removing of old unserviceable paints and repainting of steel Almirah medium with two coat of synthetic enamel paint in side and out side including preparation of surfaces complete all as per Drg and specified and directed.

BOOK CASE STEEL (FD-90, FD-1028) Removing of old unserviceable Broken glass of shutter and S&F of new glass 5mm thick as per existing size fixing to the shutter of book case complete all as per Drg and specified and directed.

Removing of old unserviceable lock and S&F of new locks in book case all are operated by one key only complete all as shown Drg and directed and specified.

Removing of old unserviceable bow handle of the shutter and S&F new CP bow handle of same size complete as per Drg and specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying two coats of synthetic enamel paint OG complete all as specified drg, as directed.

CHAIR COMPUTER WITH OUT ARMS (FD/E6/MAP/01) S&F in repair base and pedestal assy of chair computer including hydraulic system all as per drawing and directed by Engineer -in-Charge

S&F in repair to foam and cushioned and tepestry cloths of seats, rest and back of chair computer as all per drg and as directed by engineer in charge(Note tepestry cloth shall not ledd than Rs 250 Rm)

Supply and fixing wheels of chair all as per drg and directed byEngineer-in-Charge.

TABLE WITH DRAWER STEEL 900X 600 X 760MM (FD-1005) Removing of unserviceable top of the table and S&F new top of the table made out of 18mm thick prelaminated MDF Board with PVC edging around complete all as per Drg and specified & directed.

Removing of old unserviceable legs /stiffener and S&F new legs / stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete al l as shown on Drg, specified and directed.

M&L for painting of table with drawer with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Repair to broken drawer complete all as shown on Drg and specified & directed.

M&L for welding to the table where reqd n.exc 2.5cm in length each complete all as per Drg and specified & directed.

Table computer (FD-/E6/MAP/03) S&F of top of table computer made out of prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) all as per drawing and as directed by Engineer-in- incharge.

S&F in side of table computer made out of prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) all as per drawing and as directed by Engineer-in- incharge.

S&F in base of key board tray all as per drawing and as directed by Engineer-in- Charge.

S&F in drawer (assy) Made out of Prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) with telescopic channel with alm anodised knobs all as per drawing and as directed by Engineer-in- incharge.

Sofa Set to Seat of five with custion (FD-113) Removing of old unserviceable ply wood from the bottom of three seater piece and S&F new 12mm thick commercial ply wood fitting with nails complete all as specified shown as per drg and directed.

All as per Srl item No 27 above but single seater

Removing of old unserviceable front long rail of three seater piece bottom and S&F new Shisham wood long rail of suitable size free shake and knots complete all as specified, as on shown on drg and directed.

All as per Srl item No 29 above but short rail.

All as per Srl item No 29 above but back long rail .

All as per Srl item No 29 above but hand rest of three seater piece and single seater piece.

Supply of cushion covered 100 mm thick with best quality tapestry cloth for sofa set 5 seater having sitting capacity for five (one three seater and two single seater )complete all as per drg, directed and specified (Make of cushion sleep well of 32 density ) Note:- 1. Tapestry cloth shall not be less than costing of Rs.200/- RM and shall be approved by GE . 2. The unit each set comprises of 10 No. cushions ( 5 for seats and 5 for back)

Desk with Seat 940 x 890 x 700mm ( CWE/ ASR/ 08/ C1/06) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for welding to frame of desk where required notexe 2.5 cm in length complete all as specified and directed

Desk with Seat (1120 x 940 x 850mm ) (CWE/ASR-08/E3/05) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of Top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for welding to frame of desk where required notexe 2.5 cm in length complete all as specified and directed

Desk with Seat 940 x 920x 770 (CWE/ASR/08/C1/06) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of Top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

Chair moulded with arms and cushion at bottom and back (TP) S & F of cushion best quality for bottom of chair moulded as approved by GE and directed by Engineer-in-Charge.

S & F of cushion best quality for back of chair moulded as approved by GE and directed by Engineer-in-Charge.

Table Office Clk Steel (FD-84) Removing of existing UNSV top of table and S&F new table top made out of MDF board prelaminated (Teak face) 18mm thick provided with PVC edging complete all as specified and directed.

Removing of old unserviceable locks of table clerk steel and S&F new locks of best quality (as per existing size) as approved by GE complete all as specified and directed.

Removing of existing drawer of table and S&F new drawers made of 1.00 mm thick PBI sheet of suitable size complete all as shown on drg, as specified and as directed.

M&L for painting of one coat of synthetic enamel paint to table clk steel in side and out side including preparation of old painted surface with wire brush, emery paper etc complete all as specified and directed.

Desk with Seat of size 720mm x 670mm (TP) Removing of old UNSV top of desk and S&F new top of size 720 mm x 670 mm made out of MDF board 18 mm thick all as specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for welding to frame of desk where required not exe 2.5 cm in length complete all as specified and directed

S& F of new PVC seat for desk of size 334 x 228 mm as approved by GE and directed by Engineer -in- charge

Table sunmica Top 2400mm x 1200mm (TP) S&F of top of size 2400 mmx 1200 mm for Table Made out of 18 mm thick MDF board (exterior grade) all as per drawing and as directed by Engineer-in- charge.

M&L for polishing to table complete all as specified, as directed and as shown on drawing.

Table Confrence (FD-1001) S&F of top of size 2100mm x 1200 mm for Table Made out of 18 mm thick MDF board (exterior grade) all as per drawing and as directed by Engineer-in- charge.

M&L for painting of one coat of synthetic enamel paint to table confrence in side and out side including preparation of old painted surface with wire brush, emery paper etc complete all as specified and directed.

Chair Wirting (FD-20, FD-202 & FD-250) M & L for polishing of chair writing complete all as per drg, as specified and directed.

Re-canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

Table Dining Ors (FD-165(M) M&L for welding to broken table dining frame , where required not exc 2.5cm in length complete all as per drg, as specified and as directed

S & F hard rubber shoes of the legs complete all as per drg, as specified and as directed

Supply only top of table dining OR's made of 18/19mm MDF board commercial duly covered with 22 guage aluminium plain sheet complete all as per drg, as specified and as directed.

M&L for painting to steel frame of table dining OR's one coat with synthetic enamel paint black colour complete all as per drg, as specified and as directed.

GIAN SINGH AND SONS

Harson Enterprises