R R of LWSS Sari in GP Sari in Tehsil Jubbal Distt Shimla HP SH Repair and renovation of pump house Cleaning of filter bed and replacing Filter media Repair of filter bed Flushing of percolation well and C O Katcha Kulh and C O edge wall to protect

Amount

Repair in patch work with 15 mm cement plaster in 1:4 (1 Cement: 4 Sand) single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arries, internal rounded angles, chamfers and rounded angles not exceeding 80mm in grith and finished even and smooth in cement mortar 1:4 (1 Cement: 4 Sand) including all leads and lifts and carriage of material at site and as per the direction and entire

Cement concrete flooring 1:2:4 (cement: 2 Sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick with in all leads and lifts as per the direction of the Engineer Incharge.

Providing & fixing panelled glazed or panelled & glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in 2nd class deodar wood (40 mm thick)

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge

Providing and fixing vitreous China wash down water closet (European type.W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement: 1 Sand) (Seat and cover to be measured and paid for separately) Ordinary type.

Providing and fixing vitreous china wash basin with single hole for piller tap with C.l. or M.S. brackets painted white Flat back 550mmx400mm within all leads and lifts and as directed by the Engineer-in-charge.including cutting holes and making good the same but excluding fittings:-with in all leads and lifts as per the directions of the Engineer in charge.

P/F C.P. Brass Bib tap with capstan head (15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

Providing & fixing of CP angle cock of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of Gl-union 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Elbow 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Tee 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Nipple 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-

110 mm out side diameter.

Elbow 100 mm dia.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Providing and fixing of following sizes of PVC casing and capping on surface as required:-

20 mmx 12 mm

25 mmx 15 mm

Supplying & fixing of G.l. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.

S.P. 5/ 6 Amps one way switch, piano type

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

5 pin, 5/6 Amps Modular socket outlet

6 pin, 15/16 Amps Modular socket outlet

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire- set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-6 way

Providing and fixing LED street light 230 Volts 50 Watts to the entire satisfaction of the Engineer-in-Charge.

Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repair to scratches complate.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade for interior painting on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface to remove all dirt, dust and other foreign matter etc. on interior walls of Plant buildings of STP Zone 2 and Zone 3 complete in all respect as per direction of Engineer-in-Charge with in all leads and lifts.

Painting (One coat)on previousaly painted wood and wood based surface with enamel paint to give &even shade including cleaning of all dirt &dust and other foregin matter sand papering& stopping with an paint other than white.

Painting two coats (excluding priming coat) of approved make on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. With readymixed paint other than white.

P/L cement concrete 1:3:6 in foundation & plinth(20mm nominal size) & curing complete

Lifting of filter media from existing filter tank and stacking the same with in all leads and lifts and entire satisfection of Engineer-in-Charge.

Top Layer: Effective size 0.20mm to 0.40mm and uniformity 3.00

Second layer: Bottom layer broken stone 3mm to 6mm

Third Layer: Bajri 6mm to 20mm

Fourth Layer: Bajri 20mm to 25mm

Bottom layer broken stone 50mm to 75mm

Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.

Top Layer: Effective size 0.20mm to 0.40mm and uniformity 3.00

Second layer: Bottom layer broken stone 3mm to 6mm

Placing of old horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.

Bottom layer broken stone 50mm to 75mm

Fourth Layer: Bajri 20mm to 25mm

Third Layer: Bajri 6mm to 20mm

Second layer: Bottom layer broken stone 3mm to 6mm

Top Layer: Effective size 0.20mm to 0.40mm and uniformity 3.00

Chipping of RCC/Stone masonary walls/ plastering surfaces deep average 10mm width in base with in all leads aand lifts as per the direction of the Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5Sand: 3 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-

Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.

Providing and fixing of mild steel/ tor steel reinfircement for rainforced concrete work I/C bending, binding and placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge.

15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth.complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. In cement mortar 1:3 (1 cement: 3 sand)

Flushing of percolation well for removal and hoist of all silt, dirt and other material with in all leads and lifts including pumping and labour etc

Excavation in earth work and disposal of all excavated earth up to a lead of 20mtrs (twenty metres) and lift up to 1.50 mrs (one point fifty metres) disposing earth to be leveled and neatly dressed

Providing & Laying cement concrete 1:6:12(1ccement :6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts as per the directions of the Engineer in charge.

Providing andf laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nominal size ) with 15% plum concrete and curing complete excluding cost of form work in retaining walls/breast walls,the size of plums shall usually be 150 mm to 300 mm as per H.P.P.W.D Specification.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge.

Boulder filling behind R/wall & B/wall within all leads and lifts and as directed by the Engineer-in-charge.

Providing and fixing of Finolex pipe 50mm dia. In R/Wall including all re-fitting i/e elbowa, sockets etc. with in all leads aand lifts as per the direction of the Engineer in Charge.

Tushar (BID ID -588668)

AJAY KUMAR (BID ID -588699)