CONSTRUCTION OF BOXING ACADEMY AT GOPALAPURAM IN CHENNAI DISTRICT TAMILNADU

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of normal gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Providing and injecting chemical emulsion for pre-constructional Anti-Termite treatment with minimum 10 years guarantee in three stages as given below, creating a chemical barrier under and all around the column pits, wall trenches, basement excavation, top surface of plinth & along the external perimeter of the building, expansion joints, surrounding of pipe and conduits etc., complete with chlorophyrifos 20 emulsifiable concentrate in proportion 1:19 (1 part of chlorophyrifos 20EC and 19 parts of water). Cost shall include all material and labour, etc. (Plinth Area at Ground Floor level only shall be measured and paid for). Treatment shall be carried out only through specialised and approved agency.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Up to basement

Ground floor

PEB Roof height

Compound wall

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering sides and soffits including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm center to center or at suitable intervals, etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

a) Centering column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.

b) For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

c) For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab (Sump), side slabs of boxing, vertical drops, facia, vertical wall, etc.

Brickwork in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load-bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifications.

Up to Basement height

Ground floor

PEB (Pre-Engineering Building) Roof height

Brick partition walls of 11.50cm thickness using best quality II Class Ground Moulded Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including both side plastering and curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

a) Ground floor

b) PEB (Pre-Engineering Building) Roof height

c)Compound wall

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Providing Teak wood wrought and put up for frames of doors, window and ventilators and any other similar joinery works including cost of teak wood scantlings of size over 2m and below 3m in length and labour for manufacturing the frames and fixing hold fasts and fixing in position etc for all lengths as per architect designs.

Supply and fixing of solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fixing of 8" & 6" of M.S.Purlins of approved design for open Entry., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification

Supplying and fixing of M.S.grills of approved design for open Entry., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification

Supplying ,fabricating and placing the arch type truss of required span using the MS hallow box section 80mm, 100mm, 150MM, 200MM, 300MM dia (4.396 kg/m) both rafter and tie and fixing the inner centre vertical stiffner bracings 65mm dia as per design drawing given by the depart mental officers including cutting the pipe required size with the aid of gas cutting machine and welding rigidly with aid of 10 guage electrode grinding smoothy and with 25 x 6 mm flat and labour for fabrication and prtty iron works and fixing the purlin cleat etc conveying the materials to the site and erecting the same to height of 3 m from ground level and finally painting two coats of SEP over primer etc complete complying with standard specification and as directed by the departmental officers at site of work.

Fabricating, supplying and fixing PVC painted hot dipped galvanized Mandarin roofing steel sheets with the following specifications. The material should be of PPGI tile profile with red colour 0.47mm thick having coil width 1170mm sheet width 1120mm and effective with 1035mm. The steel should be G.I base pre painted hot dipped galvanized steel sheet and to be fixed with screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coated of Z120 GSM paint thickness at top to be 18 to 20 microns and tensile yield strength of 345 MPA. The surface paint reflection should be glossy finish. The sheet to be fixed with making suitable corrugated, cutting the sheet into the required size and making ornamental designs as per the site and making ornamental desgns as per the site condition on the spot. The sheets to be fixed at an average height of 5.50m by making suitable scaffolding arrangements on both directions. The rate inclusive of cost of materials, wastage of cutting for ornamental design, fixing and alignment to the roof portion, dismantling is required and to do the original conditions, neat finishing etc., complete. 1492

ALUMINIUM Window Supply and fixing of Aluminium sliding window & Fixed Window frame with shutter with newone of Powder cotaed Aluminium sliding window two track channel section of size 61.85 x 31.75 x 1.30mm for bottom side and top with sliding arrangements to drain the water entering and the window shutter made out of section of size 40 x 18 x 1.29mm and the panels fitted with 4mm thick plain glass with necessary accessories such as rubber beedings, best quality runner, lock, wheel, handle etc and shutter frame fixed with glass 4mm thick including cost of materials, labour for fabrication, power consumption required, drilling holes in masonry with power drill and good to the dismantled portion to original condition after fixing the window etc complete complying with standard specification and as directed by the departmental officers at site of work.

ALUMINIUM Ventilator Supply and fixing of ventilator with newone of aluminium anodized natural colour matt finish louvered ventilator. The outer frame will be 62 x 38 x 2mm @ 1.17Kg/M and th louvers with moving arrangements will be made with aluminium channel of size 60 x 30 x 4mm @ 0.27 Kg/M with necessary glass panes for louver 4mm thick aluminium clips, 'L' angles screws, nails, conveyance scaffolding if any and power consumption charges required for fabrication wherever necessary with power drill to the extent required and made good to original condition after fixing etc complete complying with standard specification and as directed by the departmental officers at site of work.The aluminium surface is matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 anodic film thickness of not less than 15 microns for all sections.

Providing and fixing a Fixed glasses & doors 12mm toughened glass (Saint Gobain or anyother approved make) with standard accessories like locks, handles, hinges, screws, nails of approved make etc., complete to suit the overall sizes of openings as detailed in drawing at all levels and as directed by the Engineer-in-charge.

Paving the floor with best quality Vitrified Tiles of size stainfree nano polish 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 300mmx200mmx6mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Vinyl flooring - Providing and Laying Vinyl flooring in Boxing arena & Practice and gym - Vinyl sheet with a thickness of 5 mm including the transportation, laying including Vinyl paste

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

For Terrace Floor Paving with best quality Pressed Tile 230 x 230 x 12mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the red cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength,63 thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of EngineerinCharge. 80mm thick C.C. paver block of M-35 grade with approved colour, design & pattern

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Supplying and painting the Ceiling with two coats of cement paint as instructed by the departmental officers including through preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including through scraping of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including through scraping of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by shriram Test House. Finish of the compact laminate should be suede/ *Raw silk, which includes doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 304) as per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U-Channels, (6) SS-Shoe Box Plate (7) MS-Base Plate, (8) Top rail with Corner conntector (9) Rubber noise deafening tape (10) Screws & wall Plugs. The top fitting should consist of SS round top rail which will get fixed with pilasters, with SS panel tube holder, SS corner bend (connected with top rail) will be used on the corner of cubicle

Drilling Bore well anywhere in Chennai city including transportation from one place to another place within alluvial soil or sedimentary rock clay and sand or stone pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm/200mm and the enlarging to required depth direct or reverse rig fuel, drilling the betonite mud and water required for drilling by departmental officers including construction of mud pts. (water available with a lead of 1.50km)

Reaming from 200mm pilot bore to 300mm dia bore upto 60m depth ending below ground level and as directed by the departmental officers.

Labour charges for inserting PVC Casing pipes assembly (With slots or with out slots) in the Drilled hole including jointing the pipes with pvc couplers with cement paste etc.,Complete Supply and packing the annular space with pebbles of size and quality as approved by the excutive engineers of T T D C officers

Charges for developing the bore well with air compressor of 300 cfm capacity (Minimum 8 hours) including transportation labour and fuel charges for compressor as directed by the departmental officers and conducting yield test by notch method etc., complete twad

Renewal of 5” (140mm) PVC slotted pipe approved quality and make as directed by the departmental officers etc., complete.

Renewal of 5” [140mm dia] PVC plain pipe of approved quality and make and as directed by the departmental officers etc., complete.

Supplying and filling of pebbles of 10mm to 12mm Micron size including labour charger for filling to required depth and etc., complete as directed by the departmental officers.

Providing water sample Chemical analysis as directed by the corporation officers

Supply of GM Non return valve 50 mm dia

supplying and Delivery of Clear water vertical wet type of 1.5HP Submersible Pump set suitable for 150 mm dia borewell con forming to IS 8034/2002 as amended there after and BEE 3 star rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with s.s shaft and dynamically balanced bronze or cast S.S impeller brass screws and CI FG 200 Grade pump Bowl /Diffuser with ISI markThe pump shall be directly coupled to a continuous rates two pole suitable wet type vertical squirrel cage induction motor as per IS 9283/1995 as amended there after suitable for operation in AC three phase 415 V +/- 10% 50HZ +/- 5%

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible Cable with proper Clamps Upto the Starter to required depth and also fixing of riser pipes to the required depth valves erection Clamps Pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN starters and switches, Voltmeter,ammeter,three Pilot (indicating) Lamps Capacitor single phasing PreventerWater level guard and laying and jointing the cables and twin earthing as Per IE rules etc.,Complete and testing the Pumpset and trial run for 10 days TWAD P.No 303,17 C

Supply and laying of FRLS PVC Insulated 3 core 4Sq mm Armoured Copper cable on ceiling /Wall Using Fixing accessories like Screws, Plug, Clamps etc., as per standard methods and as directed by the Departmental officers

Supplying and fixing of Nylon rope to lowering Submersible Pump

"Supply and delivery of M.S Kiosk of Size0 .75x0.45x0.75 m Made up of M.S angle of Size 50 mm x50 mm x 4 mm alround covered with 16 Gauge M.S Sheet and Kiosk door made up of M.S Plates of size 25 mm x3 mm including cutting welding Grinding locking arrangements and labour charges etc.,"

Supplying and fixing in position white/ colour special delux model glazed cascade type paryware/Hindware/Equivalent wall mounted European water closet of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litres capacity PVC/12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball value with polythene float with brass handle, union cuppling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over onecoat of red oxide primer, dismantling the masonry, and re-doing the

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white glazed earthernware Magnum urinal of best quality and approved make of size 380mm x400mm x590mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position 15mm dia brass LOng body tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Renewing the damaged broken unservicewable Health faucit with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position Indian make Special type mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

a) 20mm dia

b) 25mm dia

c) 40 mm dia

Renewing and refixing following UPVC specials of approved qaulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

UPVC Elbow

Dia 20mm

Dia 25mm

Dia 40mm

UPVC BEND

Dia 20mm

Dia 25mm

Dia 40mm

UPVC TEE

Dia 20mm

Dia 25mm

Dia 40mm

UPVC REDUCER

Dia 50mm X 40 mm

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

A) 75 mm dia

B) 110 mm dia

B) 160 mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

PVC Elbow

Dia 75 mm

Dia 110 mm

PVC SHOE

Dia 75 mm

Dia 110 mm

Dia 75 mm

Dia 110 mm

PVC Tee with Single Door

Dia 75 mm

Dia 110 mm

PVC Bend

Dia 75 mm

Dia 110 mm

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

a) 110 x 75 mm dia (20 mm water seal)

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110mm dia PVC Pipe

Supplying, laying, jointing, testing and commissioning approved make PVC 6kg pipes SWR grade confirming to IS 13592 Class "B" with rubber ring joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. The quoted rate should include encasing the pipes in toilet sunken in M-15 grade concrete as per specifications 100mm thk. all around with necessary shuttering arrangement, as directed by Engineer-in-Charge.

a) 110 mm dia

a) 160 mm dia(soil pipe)

"Supplying, fixing, testing and commissioning of glazed stoneware gully traps, 550x550mm C.I. grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 115 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover (medium duty) etc., complete."

"Providing and constructing inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm, benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge."

a) 600 x 600 mm size internal and depth more than 450 mm but not exceeding 850 mm

b) 600 x 600 mm size Heavy duty cover

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Supplying, installing, testing and commissioning approved make submersible pump made of C.I Construction suitable for building application. The quoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter, Duty of Pump :1.0 HP Submersible Pump,& 5.0 HP, 2 Lps @ 20.0m Head 1 No. Working

A) 1 HP Submersible Pump (From UG sump to O.H.T)

B) 5.0HP Submersible Pump- Fire Fighting

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

a) Dia 25mm

b) Dia 32mm

c) Dia 40mm

Providing Wiring with 2 x 2.5 sq.mm and 1 x 1.5 sq. mm FRLS wiring with 5amps modular switch or anchor or roma, Ceiling Rose, Switch box necessary interlink with all the related accessories

Providing and laying medium duty 25mm Pvc Conduit (MMS) including all specials eic complete

Providing and laying medium duty 20mm Pvc Conduit (MMS) including all specials eic complete

Providing and fixing armoured cable double run 3.5 x 150 sqmm XLPE from Transformer to Panel board including earth work and backfilling

Providing and fixing armoured cable single run 4 x 25 sqmm XLPE from Panel board to DB board

Termination for Tranformer cable

Termination for DB cable

Supply and run of 2 of No.8 SWG GI wire for earth connection, including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 100mm RCC cover slab for the brick masonry

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of single box type 4' 20 W LED Tubelight fitting complete with electronic ballast with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting

Providing and Fixing 5 & 15 amps modular Switch & Socket with back boxes of approved make

Supply and fixing of 5A or 10A or 20A AC single phase 230V, 50 Hz Watt hour metre on suitable TW box complete with earth connections

Providing and Fixing Square panel Lights 1'x 1' - 30 W of approved make

Providing and Fixing Ring Pendant Lights - 30 W of approved make

Providing and Fixing Roof Ventilators - Exhaust fan of approved make (A wind-driven roof mounted aluminum ventilator)

Providing and Fixing Flood lignt 70 W of approved make

Providing and Fixing Spot light of approved make

Providing and Fixing of MV Panel Board Incomer 125 Amps, 3 Phase, 4 Pole changeover switch with necessary metring. Outgoing 63 Amps, MCCB Breaker 6 nos and necessary interconnecting floor mounting Panel Board

Supply and Installation of Gallery Chairs Manufactured from high quality Polypropylene, The ergonomically designed backrest, provides strengthening with double wall in order to prevent cracking and tearing., The ergonomically designed backrest provides a rear sloping design for comfort when sitting. 2 Installation points. Can be manufactured in many specifications including Standard, UV Resistance, Colour Fastness, Flame Retardant and Impact Resistance, upon clients request. Seat is designed to provide easy run off of liquid.The seat has been designed for multi functional usage. Usage and locations can include parks, amphitheatres, stadiums, aquatic centres and other stepped watching areas.it requires a mechanical device to remove and cannot be pulled out from the seating area by bare hands. SPECIFICATIONS Width: 43 cm Depth: 44 cm Height: 31 cm

Supplying and Fixing HVAC -- 20 T VRF Ductable AC system

Boxing Ring Backed by rich industry experience, we are engaged in manufacturing and trading the best quality Boxing Ring. Our offered product is manufactured using premium quality raw materials. It is well known for its high performance and durability. We are committed to meet the bulk demand of our clients within a given timeline. As per the client requirement, we also provide this product in customized options. Features: Four ropes 3.5” thick covered with synthetic cover in different colors. Corner Poles made of 4” pipe in various colors. Laminated waterproof wooden planks of 8' x 3' x 1.25” thickness are used on the top of six

PREETHI CONSTRUCTIONS