NIT No GE/ND-86/2024-25

Amount

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 2.00 above but One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 2.00 above but One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 2.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F in replacement of modular Switch 6 amps,one module, 230 vots, single pole, one way (ISI marked) complete all as specified and directed.

S&F in replacement 16 Amp rating modular switch one way one module complete all as specified and directed.

S&F in replacement of modular socket out let 230 volts, 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement of modular socket out let 230 volts, 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.

Taking down old existing unsv LED lights any type any description as per direction of Engg-in-charge complete all as specified and directed.

Supply & Fixing of LED projector light fixture 56W,LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 240 AC. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3600 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed. Make: Havells/ Philips/ Orient

Supply & Fixing of LED projector light fixture 36W,LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 240 AC. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3600 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed. Make: Havells/ Philips/ Orient

Supply & Fixing of LED strip made of Silicon with RGBW LEDs,10W per mtr, 24V, 60LEDs per mtr, CRI > 80(for white), 600 lumens per mtr. The entire led should be IP67 protected with sealed ends customized as per the various site points as approved by engineer incharge. LM79 report to be submitted along the bid complete all as specified and directed. Make: Havells/ Philips/ Orient

Supply & Fixing of DMX512 Decoder for LED strip having 4 channels, constant voltage output, the maximum current of 6A/ch for RGBW decoder, 256 grade brightness adjustment, Short- circuit protection, overload protection, over-temperature protection, Rated input supply ofInput Voltage 24V DC. Dimensions: 125x54x41 mm (LxWxH) complete all as specified and directed. Make: Havells/ Philips/ Orient

Supply & Fixing of Aluminium Channel for LED strip complete all as specified and directed. Note: Dimension of aluminium channel may vary as per the sample of LED strip (Item No 12.00) approved by Engg-in-charge. Make: Havells/ Philips/ Orient

Supply & Fixing of IP67 power supply 24V output Power consumption- 200W complete all as specified and directed.

Supply & Fixing of Signal Booster/Splitter with 4-Way output for spreading and amplyfing theDMX Data signals in multiple directions, Input-220-240V AC complete all as specified and directed.

Supply & Fixing of 2X512 DMX 512 Controller Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS complete all as specified and directed. Make- Nicolaudie, Pharos, Madrix,Color Kinetics.

Supply & Fixing of enclosure for Power Supply, Splitter, DMX Controller : Size 450 x 300 x 250 mm, plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate,Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 complete all as specified and directed.

Supply & Fixing of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable complete all as specified and directed.

Programming, Testing, Troubleshooting and synchronization of DMX control system.The addressing of fixtures with the multiple scenes(atleast 20Themes) as per instruction of Engineer in charge complete all as specified and directed. Note: Installation of facade lighting in connection with all themes and control system shall be included in the quoted rate.

Supply and fixing LT Cables P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I in ground/ pipe (as per site requirement) including end termination, making necessary connection, testing etc. as required of size 4.0 Core x 10 Sqmm Al. Ar. LT XLPE complete all as specified and directed. Note: (a) All the cables and minor thimbles, soldering, brazing with the control system shall be included in the quoted rates for item No 11.00 to 20.00 (b) Testing of all the Items shall be done (11.00 to 20.00) on site in the presence of user, Engg-in-charge and GE. (c) Any minor changes suggested by User and Engg-in-charge after testing must be considered and implemented thereafter before completion and utter satisfaction of user and Engg-in-charge

S&F Copper Flexible Cable P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with flexible copper conductor confirming to IS:694 in existing pipe/ conduit including making necessary connection, testing etc. as required of size 5.0 core 4.0 sqmm copper flexible cable complete all as specified and directed. Note: (a) All the cables and minor thimbles, soldering, brazing with the control system shall be included in the quoted rates for item No 11.00 to 20.00 (b) Testing of all the Items shall be done (11.00 to 20.00) on site in the presence of user, Engg-in-charge and GE. (c) Any minor changes suggested by User and Engg-in-charge after testing must be considered and implemented thereafter before completion and utter satisfaction of user and Engg-in-charge

All as per Item No 24.00 above but size 5.0 core 2.5 Sqmm Copper Flexible Cable complete all as specified and directed. Note: (a) All the cables and minor thimbles, soldering, brazing with the control system shall be included in the quoted rates for item No 11.00 to 20.00 (b) Testing of all the Items shall be done (11.00 to 20.00) on site in the presence of user, Engg-in-charge and GE. (c) Any minor changes suggested by User and Engg-in-charge after testing must be considered and implemented thereafter before completion and utter satisfaction of user and Engg-in-charge

S&F of 40mm outside dia DWC Pipe ISI marked along with all accessories conforming to IS 14930, Part II including excavation, pipe laying & refilling with soil or on wall with GI clamping, etc complete all as specified and directed.

S&F of 20/25mm sizes of medium class PVC/ Flexible conduit along with accessories in surface/recess including cutting the wall and making good the same as required complete all as specified and directed.

Supply & fixing of outdoor type cable junction box IP65/66 with terminals including all acessories suitable for Terminating 4.0/2.5 sqmm Copper flexible cable including all acessories complete all as specified and directed.

Supply & fixing of outdoor type cable Junction Box with terminals/ Connector IP65/66 suitable for Terminating/ Loop-in Loop-out of 4.0/2.5 sqmm Copper flexible cable including all acessories complete all as specified and directed.

Supply, installation, testing and commissioning of Maintenance Free Gel Earthing with Strip in Pipe Technology filled with anti corrosive conductive compound below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound - With Strip in Pipe Technology GI Pipe 2000 mm long, 50/25mm, Terminal 12 mm GI Strip with 8SWG GI Earth wire/ 25x3mm GI Strip complete all as specified and directed.

TRIVENI ASSOCIATES (BID ID -3171414)

RUCHIKA ENGG.WORKS (BID ID -3168778)

NEERU ELECTRICALS (BID ID -3166731)